Tikkurila Temafloor P300

    167
    TIK4730

    Tikkurila Temafloor P300, a two-component, solvent-free, self-levelling epoxy coating for new and old concrete floors exposed to heavy mechanical and chemical stress in industrial and storage facilities, withstanding water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions.

    • Huge colour range with RAL, BS and NCS
    • Good resistance to abrasion
    • Withstands 70ºC dry heat and 60ºC in immersion.
    • Optional Flex hardener makes the paint surface flexible and thus more resistant to cracking of concrete
    • Also for car parks, garages, business premises, shopping centres, restaurants and cafes
    • Hardener 008 4514 is supplied as default hardener for this product. Please enquire before purchase if you require an alternative hardener
    • Flex hardener makes the paint surface flexible and thus more resistant to cracking
    • For industrial and professional use only.

    Please note: 10L Pack: 6.25L Base + 3.75L hardener, 20L Pack: 12.5L Base +7.5L hardener.

    Product customisation

    Don't forget to save your customization to be able to add to cart
    • 250 char. max
    Colour Group
    Size
    Finish
    £100.78(ex. VAT)
    £120.94 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Tikkurila Temafloor P300 is a two-component, solvent-free epoxy coating for new and old concrete floors exposed to heavy mechanical and chemical stress in industrial and storage facilities. It withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions.

    Also withstands up to 70ºC dry heat and 60ºC in immersion - does not resist abrupt, great or repeated changes of temperature.

    For industrial and professional use only.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Huge colour range with RAL, BS and NCS
    • Good resistance to abrasion
    • Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions.
    • Resists only temporary splashes of oxidizing acids and bleaching chemicals - a separate chemical resistance table available
    • Withstands 70ºC dry heat and 60ºC in immersion.
    • Does not resist abrupt, great or repeated changes of temperature
    • Self-levelling coating
    • Temafloor Flex hardener makes the paint surface flexible and thus more resistant to cracking
      • Flex Hardener is available separately as POA subject to a 14 day lead time - please contact our sales team on 0113 2455450 or [email protected] to discuss your project requirements
    • For new and old concrete floors exposed to heavy mechanical and chemical stress in industrial and storage facilities, repair shops; e.g. process or paper machine units and corridors. Also for car parks, garages, business premises, shopping centres, restaurants and cafe`s
    • For industrial and professional use only.



    Technical Data


    Volume Solids:

    • approx. 100%

    Specific Gravity:

    • 1.4 kg / l (mixture)

    Pot Life (23℃)

    • 20–30 minutes on substrate, approx. 15 minutes in the mixing container.

    VOC

    • VOC 2004/42/EC (cat A/j) 500 g/l (2010)
    • Temafloor P300: max. VOC < 500 g/l



    Mixing Ratios


    • Base (Temafloor P300) - 4 parts by volume
    • Hardener 008 4514 - 1 part by volume

    Or

    • Paint (Temafloor P300) - 2 parts by volume
    • FLEX hardener 930 5002 - 1 part by volume



    Practical Coverage


    Coverage on concrete floors is on the average:

    • Film thickness 0.3 mm coverage approx. 3 m²/litre
    • Film thickness 0.5 mm coverage approx. 2 m²/litre

    Practical coverage depends on the porosity and evenness of the substrate and on the application method.



    Drying Time (23℃)


    • Dust dry after 6 hours
    • Light trucking after 16 hours
    • Fully cured after 7 days

    At lower temperature the curing process will last longer.

    With Temafloor FLEX hardener the curing times are a little longer. Available to order seperately - contact our sales team on 0113 2455450 or [email protected] to discuss your requirements



    Cleaning of Equipment




    Thinning Instructions


    • Do not thin Temafloor P 300 epoxy coating.



    Reaction to Fire


    • B FL -s1 according to standard EN 13501-1



    Surface Preparation


    New concrete:

    • Remove laitance by power grinding, vacuum grit blasting or hydrochloric acid etching.
    • Choose the method best suited for the premises.
    • After grinding remove dust carefully with a vacuum cleaner.
    • Hydrochloric acid etching is carried out with diluted hydrochloric acid (1 part concentrated hydrochloric acid, 4 parts water).
    • Rinse with plenty of water.
    • Dry the floor.

    Old concrete:

    • Remove all grease, oil, chemicals and other impurities by Maalipesu detergent.
    • Remove old peeling paint layer by grinding or vacuum grit blasting.
    • Choose the method best suited for the premises.
    • Clean out pot-holes removing all loose friable material.
    • Open cracks with e.g. an abrasive tool. Remove loose material and dust.
    • If cementitious screed is used, check compatibility with the levelling screed manufacturer.



    Application Conditions


    • The relative humidity of the concrete should not exceed 97%.
    • The temperature of the ambient air, surface or coating should not fall below +15ºC during application or drying.
    • Relative humidity of air should not exceed 80%.
    • Note! There is a natural tendency of this coating to chalk, discolor or yellow unevenly.
    • It is recommended to use polyurethane topcoat when there are high aesthetical requirements on colour appearance.



    Mixing Components


    First stir base and hardener separately. Mix the correct proportions of base and hardener thoroughly (approx. 2 minutes to get homogenous mixture) by using a low speed industrial hand drill with a paddle.

    Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface, weaken the properties of the coating and risk the success of the application.



    Priming


    Prime using Temafloor 200, Temafloor 400 or Temafloor 220W epoxy varnish thinned 20– 50% with Thinner 1029 or Fontefloor EP Primer epoxy varnish thinned 20–50% with water.

    Pour the varnish mixture onto the floor and apply as much as is needed to impregnate the concrete surface.

    If necessary, repeat priming to get a non-porous surface.

    A porous priming coat will result in holes and air bubbles in the finished coating.

    Subsequent treatment can be carried out after 2 hours using "wet-on-wet" technique.



    Patching


    • Patch pot-holes and cracks with Colofill putty or a mixture of unthinned Temafloor 200 Primer epoxy varnish or Temafloor P300 epoxy coating and dry, clean sand.
    • Mixing ratio e.g. 1 part by volume of varnish mixture and 1–2 parts by volume of sand of grain size 0.1–0.6 mm.
    • Sand the patched areas before overcoating, if necessary.

    Note! Concrete surface should always be primed before patching.



    Topcoating


    • Overcoating should be done within 6–24 hrs after priming with unthinned Temafloor P300.
    • If the primed surface is not overcoated within 24 hrs, it should be abraded.
    • Pour the mixture onto the floor and apply it with a trowel and level with a roller.

    • Control that the thickness of layer is correct by observing coating consumption and by measuring the film thickness.
    • Recommended film thickness is 0.3–0.5 mm.
    • It is recommended to apply two thin layers with minimum DFT 0.3 mm.
    • Use spiked roller to finish the surface approx. 10–20 min after application.
    • Spiked roller helps removing air bubbles from the coating.

    • Temafloor P300 metallic shades can be applied with a brush, roller or airless spray.
    • Using a roller with different colour shades produces a vivid surface with a metallic shine effect.
    • Recommended film thickness is 0.5–1.0 mm.



    Product Details
    4730-768463

    Data sheet

    Manufacturer
    Tikkurila
    For Use By
    Professional Use
    Water / Solvent Based
    Solvent
    Sheen
    Gloss
    Colour
    Fully Tintable
    Single, Two or Three Pack
    Two-Pack
    Parts
    2
    Base Type
    Epoxy
    Minimum Applied Thickness
    0.3 mm DFT
    Solvent
    Mixed - see safety data sheet
    Mixing Ratio
    4:1 (standard hardener)
    Key Features
    Withstands water, oils, greases, chemicals and dilute solutions of non-oxidizing acids, alkali and salt solutions.
    Coverage
    2-3m²/litre
    Recommended Thinner/Cleaner
    Not for thinning; for cleaning, use Thinner 1029 or 1031
    Unit Contents
    Base & standard (008 4514) hardener
    Compatible Primers
    Temafloor 200, Temafloor 400 or Temafloor 220W epoxy varnish thinned 20– 50% with Thinner 1029 or Fontefloor EP Primer epoxy varnish thinned 20–50% with water
    Compatible Topcoats
    Temafloor P300
    Min. Application Temperature
    15°C
    Solids by Volume
    approx. 100%
    Heat Resistance (up-to)
    Up to 70ºC dry heat and 60ºC in immersion
    UN Number (Activator)
    UN2289
    UN Number (Base)
    UN3082
    Suitable For Use On
    Concrete Floors
    Finish
    Gloss
    Components
    2K
    Product Usage Type
    Self Smoothing Screed
    Product Range
    Temafloor
    Colour Family
    Beige
    Colour Family
    Yellow
    Colour Family
    Green
    Colour Family
    Black
    Colour Family
    Red
    Colour Family
    Pink
    Colour Family
    Cream
    Colour Family
    Purple
    Colour Family
    Grey
    Colour Family
    Off-White
    Colour Family
    Blue
    Colour Family
    White
    Colour Family
    Brown
    Colour Family
    Anthracite Grey
    Colour Family
    Orange
    Average Application Thickness
    0.3-1mm
    Product Type
    Epoxy
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Tikkurila Temafloor P300 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like

    Tikkurila Fontefloor EP Primer

    Tikkurila Fontefloor EP Primer is a two-component water-borne epoxy lacquer that seals the concrete surface and provides adhesion to all Temafloor coatings and screeds, and Fontefloor paints, and can also be used for patching cracks and holes in concrete.Dries in 6 hours for overcoating Also used for priming of damp concrete with relative...

    Price £379.80 (ex. VAT)
    In Stock and Available for Delivery

    Tikkurila Temafloor 200 Primer

    Tikkurila Temafloor 200 Primer is a two-component solvent-free epoxy varnish. It gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day.Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion...

    Price £440.41 (ex. VAT)
    In Stock and Available for Delivery

    Tikkurila Temafloor 220W Primer

    Tikkurila Temafloor 220W Primer is a two component solvent-free varnish used for priming of new and old concrete floors, especially where solventless and odourless products are needed.For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. Good resistance against oil and grease. Suitable for priming...

    Price £319.50 (ex. VAT)
    In Stock and Available for Delivery

    Tikkurila Temafloor 400

    Tikkurila Temafloor 400 is a two-component solvent-free epoxy varnish. An excellent product for dust binding and priming of new and old concrete floors, especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand.Used as a binder for Temafloor 4000 troweling screed and epoxy...

    Price £331.65 (ex. VAT)
    In Stock and Available for Delivery

    Tikkurila Thinner 1029

    Tikkurila Thinner 1029 is a thinner for ethyl zinc silicate paints and solvent-free epoxy paints.

    Price £73.53 (ex. VAT)
    In Stock and Available for Delivery

    Tikkurila Thinner 1031

    Tikkurila Thinner 1031 is a thinner for epoxy paints, silicone paints, polyvinylbutyral paints, 2-component zinc rich paints and epoxy shop primers.

    Price £21.86 (ex. VAT)
    In Stock and Available for Delivery