703 MMA Flexible Anti Slip Coating is a two pack, fast curing flexible coating usually for tarmac and asphalt surfaces. Provides a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared concrete and steel surfaces. Ideal for delineating parking bays, car parks, balconies, etc.
703 MMA Flexible Anti Slip Coating is a two pack, fast curing flexible coating usually for tarmac and asphalt surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties.
The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin.
703 MMA Flexible Anti Slip Coating allows a fast return to service and is also available in concrete grade for concrete and cementitious surfaces.
This product is for Professional Use Only.
Recommended Uses:
As a tough, durable, slip resistant coating for tarmac and asphalt type surfaces
Can also be used on correctly prepared concrete and steel surfaces
Delineating parking bays, car parks, balconies, walkways, etc
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²
Surface Preparation
Asphalt and tarmac surfaces must be clean, dry and free from contaminants
New asphalt and tarmac must be allowed to ‘weather’ to ensure any excess oils are released
Mechanical preparation is not normally necessary, however vacuum shot blasting/grit blasting is recommended when the material is being applied to concrete or steel surfaces to provide a mechanical ‘key’
Priming:
Primer not normally required for Asphalt and Tarmac
703 MMA Flexible Anti Slip Coating will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered
Storage & Shelf Life
Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
Adequate ventilation of the storage area should be provided
Keep container tightly closed when not in use
703 MMA Flexible Anti Slip Coating has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
703 MMA Flexible Anti Slip Coating is flammable during application, so adequate safety precautions should be observed.
Avoid contact of the material with skin and eyes
Wear gloves and goggles
Wash off splashes immediately with soap and water
Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
703 MMA Flexible Anti Slip Coating shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
703 MMA Flexible Anti-Slip Coating Q1: 10L tins. What is the nominal coverage for a tin this size and do you offer other sized tins? Q2: If after a few years there are odd areas requiring recovering, is this OK to do?
Answer from Rawlins’ Technical Team:
A 10kg pack (the only size available) will be sufficient to coat an area of 10m² at a rate of 1kg/m². Yes, it can be applied over itself for maintenance if required after cleaning and preparation as per the data sheet.
Jeremy on 2018-12-10 17:52:27
Question:
Hi, do you think it'd be possible to apply 703 MMA Flexible Anti-Slip Coating on filmface plywood ? (you, know, that black type of plywood thats very sturdy and keeps the moisture out) Thank you !
Hi we have a tarmac drive but has a downward slope,i have recently covered with t.homsons driveseal when takeing our horse down it he sometime slips ,would this product beok to apply on the drive,would only apply a strip 1mtrx8 down side.many thanks stan pottle.
703 MMA Flexible Anti-Slip Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
706 MMA Floor Primer is a rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.
Ideal for use as a rapid curing primer for...
707 MMA Metal Primer is a rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.
Rapid cure, even at low temperatures - from as low as -30°C*
Very good corrosion resistance
Excellent adhesion
Impervious to water...
709 MMA Damp Proof Primer has been developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds.
Rapid cure, even at low temperatures - from as low as -30°C*
Very good chemical resistance
Excellent adhesion to damp concrete
Impervious to water
Pre-packed units ready for use
Easily...
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.
Low Hazard
Low evaporation rate
Excellent solvency powers
80% biodegradable
This product is for Professional Use Only
Images are for illustrative purposes only and may differ from the actual product
More...
704 MMA Flexible Anti Slip Coating Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared steel surfaces. Ideal for parking bays, car parks, balconies, walkways, etc....