Rust-Oleum Thinner 22 is for the dilution of synthetic enamels and varnishes for airless application. Degreasing of metals and most wood types. Cleaning of `spots` of acrylic paints and acrylic fixing paints (e.g. on glass). Best used to dilute the following products: Primer 44 Fassiclor Galvaprim Vernac Gloss Vernac Satin More...
Rust-Oleum Mathys Pegasol Quartz
This product is temporarily unavailable; in the meantime, our technical team recommend KoverTek TekPur Waterproof Balcony Kit or Britannia Walkway Safety Coating as a great alternative - use discount code SAVE10 at checkout to save 10%!
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Rust-Oleum Mathys Pegasol Quartz is a two-pack, water based, anti-slip floor coating for indoor and outdoor applications, ideal for use on parking spaces, tennis courts, terraces, balconies, etc.
- Durable Quartz finish
- Water vapour permeable
- Easy application
- Fast drying
- Water based
- Abrasion resistant
- Excellent adhesion on most substrates
Rust-Oleum Mathys Pegasol Quartz
Rust-Oleum Mathys Pegasol Quartz is a two-pack, water based, anti-slip floor coating for indoor and outdoor applications. Ideal for use on parking spaces, tennis courts, terraces, balconies, etc. and is water vapour permeable with a quartz structure for anti-skid properties.
Features & Benefits
• Durable Quartz finish
• Water vapour permeable
• Easy application
• Fast drying
• Water based
• Abrasion resistant
• Excellent adhesion on most substrates
- Density: 1,6
- Gloss Level: Satin
- Solids content in volume: 63 %
- Solids Content in weight: 77 %
- Mixing Ratio: Base : Activator = 7 : 0.5 (Weight)
Drying Times At 20°C/RH 50%
- Touch dry: 45 minutes
- Dry to handle: 2 hours
- Dry to recoat: 6 hours
- Fully cured: 1 week
- Pot Life: 1 hour (12 hours when diluted with 5% volume water)
800 g/m² per coat
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
The substrate should be clean, dry and free from rising ground water. Pegasol Quartz can be applied directly on tiles, ceramics (even glazed), non-porous natural stones, tarmacadam. Porous concrete must be impregnated first with Primer 44 HS or with Vernac diluted with 10% volume Thinner 22. Curing compounds in case of poly concrete have to be removed by sand or grit blasting. On new or non-porous concrete, remove the cement grout by sand or grit blasting or attack with diluted hydrochloric acid (3 l hydrochloric acid in 10 l water, let it act for 10 minutes and rinse abundantly with clear water), let it dry afew days before application.
- Pegasol Quartz will withstand foot traffic after 6 hours and wheeled traffic after 3 days.
- Because of the development of acid products in Pegasol (Quartz) under influence of UVrays, it should not be finished with polyurethane-varnishes (e.g. Pegagraff Hydro) incase of external works.
- Add the hardener to the base gradually with good mechanical stirring.
- When Pegasol Quartz has to be recoated, please contact Rawlins Techincal Support.
- For applications on balconies and terraces, please contact Rawlins Technical Support.
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- For Use On
- Tile, Ceramic, Natural Stone, Macadam, Concrete,
- Application Method
- Brush, Roller
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- Dry to Handle (at 20°C)
- 2 Hours
- Dry to Recoat (at 20°C)
- 6 Hours
- Fully Cured (at 20°C)
- 1 Week
- 800 g/m²
- Max. Application Temperature
- 80% R.H
- Min. Application Temperature
- Solids by Volume
- 63 %
- 30 g/l
- Touch Dry
- 45 Mins
- Recommended Dry Film Thickness
- 315 μm
- Recommended Wet Film Thickness
- 500 μm (800 g/m²)
|P Roberts on 2021-03-15 11:09:16|| |
Would this paint on top of a rubber flooring that is tired but is in a long corridor outside changing rooms. But it would need to be able to mop after sports have taken place
Assuming the rubber flooring is clean, dry, sound and prepared as detailed in the Technical Data Sheet we can recommend Smartkote Safekote.
This is a bare foot friendly anti-slip floor paint that can be applied to rubber and is available in a range of colours or a clear option.
|Sudhir Borgaonkar on 2020-07-03 18:21:26|| |
Greetings from Inverness I have a first floor balcony with GRP floor - painted by the builders. the paint is now peeling off and the grain is visible and i would like to repaint it. There is no way to get info on the paint used originally as the builders went bust long time ago. I want a good protection from rain( scottish weather!) wind and frost and snow. Can please suggest a few alternatives? thanks best Sudhir
Assuming the peeling paint is removed and the substrate is clean, dry and sound for this application we can recommend the Bullet Roof Mono Top System. Please see the Technical Data Sheet and Application Guide for primer and system requirements.
|kerry on 2020-03-27 08:16:16|| |
can this be used on outdoor patio area on ceramic outdoor tiles please
The substrate should be clean, dry and free from rising ground water, then Rust-Oleum Mathys Pegasol Quartz can be applied directly on ceramic tiles.
This product is temporarily unavailable; in the meantime, our technical team recommend Britannia Aquashield Smooth Clear as a great alternative - use discount code SAVE10 at checkout to save 10%! Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but...
Rust-Oleum Mathys Primer 44 HS has a large fixation capacity for stabilising loose particles and improving the adherence of subsequent topcoats. Unsaponifiable Good UV resistance Excellent fixation on roofs Very flexible Chlorinated rubber technology, solvent-based Quickly water-resistant (1 hour after application at 20°C)...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...