• 10KG Pack
  • 5KG Pack

704 MMA Flexible Anti-Slip Coating Concrete Grade

RAW704

704 MMA Flexible Anti Slip Coating Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared steel surfaces. Ideal for parking bays, car parks, balconies, walkways, etc.

  • Easily applied, no primer required
  • Cures at low temperatures - as low as 0°C*
  • Also available in 4,000+ colour options from RAL, BS and NCS
  • Images are for illustrative purposes only and may differ from the actual product
  • This product is for Professional Use Only

*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£72.00
£86.40 Incl. VAT
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

Description

704 MMA Flexible Anti Slip Coating Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties.

The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin.

704 MMA Flexible Anti Slip Coating Concrete Grade allows a fast return to service.

This product is for Professional Use Only.

Recommended Uses:

  • As a tough, durable, slip resistant coating for concrete substrates
  • Can also be used on correctly prepared steel surfaces
  • Delineating parking bays, car parks, balconies, walkways, etc



Quick Links - Click To Jump To Section:




Features & Benefits


  • For concrete surfaces
  • Provides a seamless floor finish with protective and decorative properties
  • Light foot traffic after just 1 hour at 20°C
  • Slip resistant
  • Can also be used on correctly prepared steel surfaces
  • Two-pack
  • Tough and abrasion resistant
  • Easily applied, no primer required
  • Flexible
  • Wide range of colours
  • Cures at low temperatures - as low as 0°C*

*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Typical Properties


Technical Data
  704 MMA Flexible Anti Slip Coating CG
Pot life @ 20°C: 15 Minutes
Pot life @ 10°C 20 minutes
Tensile strength: 12MPa
Elongation at break: 50%
Adhesion to concrete: 3MPa (substrate failure)
Temp. range during application: 0°C* to + 40°C
Temp. range during service: -30°C to + 60°C



*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Chemical Resistance
Chemical Resistance
Dilute Acids and Alkalis Excellent
Oil Excellent
Petrol Excellent
Diesel Excellent
Vegetable Oils Excellent
Fruit Juices Excellent



Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



Coverage


  • A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²



Surface Preparation


  • Concrete surfaces must be clean, dry and free from contaminants
  • New concrete substrates must be allowed to cure for a minimum period of 28 days
  • Mechanical preparation by vacuum shot blasting/grit blasting is recommended when the material is being applied to concrete or steel surfaces to provide a mechanical ‘key’



Priming:

  • Primer not normally required for concrete
  • Porous concrete substrates should be primed with 706 MMA Floor Primer

Notes:

For application to Asphalt/Tarmac surfaces instead see 703 MMA Flexible Anti-Slip Coating.

Damp concrete surfaces can be primed using 709 MMA Damp Proof Primer – refer to product data sheet for full details.

Steel surfaces which cannot be prepared by way of shot/grit blasting may be instead primed using 707 MMA Metal Primer – however this will result in lower performance characteristics - refer to product data sheet for full details.



Mixing:

  • 704 MMA Flexible Anti Slip Coating CG is supplied as a two pack material consisting of the base component, and the catalyst component
  • Incorporate the catalyst component under mechanical stirring and mix for 1-2 minutes



Mixing Ratio:

  • (% Catalyst by Weight) = 2



Application


  • Apply 704 MMA Flexible Anti Slip Coating CG using short nap perlon, smooth lambswool rollers or squeegee at a nominal rate of 1-2kg/m²
  • On porous or open surfaces a second coat may be required



Cleaning




Curing


  • Light Foot Traffic: 1 hour @ 20°C
  • Vehicular Traffic: 2 Hours @ 20°C
  • Full chemical resistance: 24 hours @ 20°C



Limitations


  • Do not apply directly to damp substrates

704 MMA Flexible Anti Slip Coating CG will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered.



Storage & Shelf Life


  • Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
  • Adequate ventilation of the storage area should be provided
  • Keep container tightly closed when not in use
  • 704 MMA Flexible Anti Slip Coating CG has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions



Health & Safety


704 MMA Flexible Anti Slip Coating CG is flammable during application, so adequate safety precautions should be observed.

  • Avoid contact of the material with skin and eyes
  • Wear gloves and goggles
  • Wash off splashes immediately with soap and water
  • Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
  • Please refer to Material Safety Data Sheet for additional information
  • 704 MMA Flexible Anti Slip Coating CG shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
RAW704

Data sheet

Manufacturer
Rawlins Paints
For Use On
Concrete, Steel
Application Method
Roller, Squeegee
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
10KG
Key Features
Fast Curing
Touch Dry (at 20°C)
1 Hour
Fully Cured (at 20°C)
24 Hours
Pot Life (at 20°C)
15 Minutes
Coverage
1m² per KG
Recommended Thinner/Cleaner
109 Tool Cleaner
Tensile Strength
12MPa
Max. Application Temperature
40°C
Min. Application Temperature
0°C
Shelf Life (from date of manufacture)
6 months
UN Number (Activator)
UN3106
UN Number (Base)
UN1866
Elongation at break
50%
Pot Life (at 10°C)
20 minutes
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Gavin Tucker on 2022-04-27 08:34:07
Question: 

Hi, Can the product be used on a DDA complaint external ramp which is brushed finish concrete? The ramp has no protection from elements so the paint will be wet when it rains. Will it remain antislip? Thanks Gavin

Answer: 

As far as we are aware DDA (Disability Discrimination Act) compliance only refers to the gradient and width of the ramp (as well as handrail height) so it doesn’t have any bearing on the wearing surface materials.

704 MMA Flexible Anti-Slip Coating Concrete Grade is suitable for the application although we would recommend mechanical preparation first.

If no mechanical prep is possible, the substrate is clean, dry, sound and prepared as detailed in the technical data sheet then 706 MMA Floor Primer should be used to seal the surface first.

Although adhesion is only guaranteed if mechanical prep is carried out.

This paint will still have a level of anti-slip wet or dry.


Question about the product

* Required fields
(read)
Send
You might also like

703 MMA Flexible Anti-Slip Coating

703 MMA Flexible Anti Slip Coating is a two pack, fast curing flexible coating usually for tarmac and asphalt surfaces. Provides a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared concrete and steel surfaces. Ideal for delineating parking bays, car parks, balconies, etc....

Price £72.00
In Stock and Available for Delivery

706 MMA Floor Primer

706 MMA Floor Primer is a rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds. Ideal for use as a rapid curing primer for...

Price £112.00
In Stock and Available for Delivery

707 MMA Metal Primer

707 MMA Metal Primer is a rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water...

Price £112.00
In Stock and Available for Delivery

709 MMA Damp Proof Primer

709 MMA Damp Proof Primer has been developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good chemical resistance Excellent adhesion to damp concrete Impervious to water Pre-packed units ready for use Easily...

Price £112.00
In Stock and Available for Delivery