Description

Coo-Var Suregrip Anti-Slip Floor Paint is a single pack aggregated floor paint. It provides a rough, anti-slip finish which helps to prevent slips and falls in areas with foot and light truck traffic. It is perfect for areas where slip resistance is required such as ramps, walkways, steps, stairwells, car pits and around machinery. Suitable for internal and external use.

Features & Benefits

Single pack
For suitably primed concrete, wood, metal and GRP
Provides a rough, anti-slip finish when dry
Provides durability, decoration and protection
For internal and external use
Ideal for boats, steps and stairways, disabled ramps, doorways, machinery areas and most floors
For foot, light truck and occasional heavy truck use

Spreading Rate

6-10m² per litre (60-100 micron d.f.t based on brush application)

Drying Times

Drying Times @ 20 °C
Touch Dry	6hrs
Dry To Recoat	16hrs
Hard Dry	24hrs
Full Hardness	5-7 days

Low temperature and high humidity will adversely affect application, drying and performance of any coating.

Preparation

All surfaces should be clean, dry, sound and free from contaminants

Concrete:

Power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint
This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch
These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance
New concrete must be allowed to cure thoroughly which can take up to 3 months
Apply a 10% thinned coat of Coo-Var Floor Paint to prime and seal the surface prior to applying Coo-Var Suregrip

Other surfaces have to be prepared and primed with the suitable primer for that substrate.

Existing Painted Surfaces:

Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced
Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly

Application

Stir well before use (do not use a mechanical shaker)
In confined spaces provide adequate ventilation during application and drying
Do not thin
Apply by brush or short/medium roller

Preceding Coat:

Wood - Coo-Var Penetrating Wood Primer
Ferrous Metals - Coo-Var Zinc Phosphate Metal Primer
Concrete - 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer

Subsequent Coat:

Coo-Var Suregrip

Cleaning

Thinners 14

VOC

343g / litre

Safety Data

See Safety Data Sheet

Product Details

Reference 125/G139/138/D

Data sheet

Manufacturer: Coo-Var
Interior / Exterior Use: Interior and Exterior
For Use On: Concrete, Wood, Tarmac, Stone, Brickwork, Metal
Application Method: Brush, Roller
Single, Two or Three Pack: Single
Pack Size: 2.5L, 5L
Base Type: Organic Solvents (see safety sheet for details))
Touch Dry (at 20°C): 6 hours
Coverage: 6-10m² per litre
Recommended Thinner/Cleaner: Do Not Thin
Solids by Volume: 60%
Touch Dry: 6 Hours
UN Number: UN1263
Fastest Delivery: Next Working Day

Attachments

Download

Pendulum Slip Test

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Suregrip Brochure

Download

Coo-Var Brochure

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

Iksan on 2021-12-07 15:21:28	Question: I need anti slip paint over galvanized steel drainage covers on a walkway which is in constant use (foot traffic). Will this be a suitable paint for it? What is the expected durability of this product?
	Answer: Assuming the galvanised covers are clean, dry, sound and prepared as detailed in the technical data sheet this paint will be suitable. The covers must be treated first with Teamac Mordant Solution (T Wash), then one coat of Coo-Var Zinc Phosphate Primer should be applied. Coo-Var Suregrip Anti-Slip Floor Paint is suitable for areas exposed to foot traffic and light truck traffic. The life span of the product will depend on the level of traffic.

stuart barratt on 2021-11-30 11:29:26	Question: what is the lowest temperature i can use the floor paint please
	Answer: Thank you for the enquiry, we would recommend application when substrate temperatures are above 5°C.

Graham on 2021-10-22 11:37:39	Question: Hi, I have the Anti-slip paint and was wondering if I can use it on outside floor tiles on the steps to my house
	Answer: Coo-Var Prime-All would be the recommended primer for use on tiles prior to the application of Coo-Var Suregrip.

Mark on 2021-08-06 16:02:28	Question: When you say “a 10% thinned coat of paint” I’m assuming you mean a coat consisting of 90%paint and 10% thinner or is it the other way round ?
	Answer: Depending on the substrate, Coo-Var Floor Paint can be used as a primer thinned 10% with Teamac Thinner 14. 1ltr of paint should have 100ml of thinners mixed in.

Lucy on 2020-05-07 16:30:09	Question: What product is best to clean equipment after this suregrip paint has been applied? E.g. cleaning brushes and rollers?
	Answer: For cleaning brushes and rollers after application we can recommend Thinner 14.

nigel statton on 2019-11-08 15:15:25	Question: i am looking for an anti slip coating to apply to drain covers in a school walkway that is used infrequently
	Answer: Coo-Var Suregrip Anti-Slip Floor Paint would be suitable for this application but assuming the covers are currently bare, ferrous metal they would need first priming with Coo-Var Zinc Phosphate Primer.

matthew white on 2019-09-24 11:40:19	Question: do we need primer for this paint
	Answer: Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer Sealer on concrete.

Dalco Services on 2019-05-28 08:29:38	Question: Need a safety yellow anti slip paint to mark edges of metal stairs in a school - is the Suregrip Coo Var anti slip floor paint bright "yellow enough" to be seen?
	Answer: As a guide, the yellow Coo-Var Suregrip Anti-Slip Floor Paint is available in is close to BS 4800 08 E 51.

Mary Carver on 2019-04-16 12:36:45	Question: Do you supply sample pots of light and dark grey please Mary
	Answer: Sample pots of this product are not available but we do have dry samples that we can post if you can provide an address to our sales team.

Brenda on 2018-02-17 16:29:16	Question: Have slopping concrete steps leading up to house what is the best paint to make them look better.
	Answer: All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Apply a 10% thinned coat of Coo-Var Floor Paint to prime and seal the surface prior to applying Coo-Var Suregrip.

Ron Hughes on 2017-11-15 17:41:09	Question: Do you need to use a primer before using coo var outdoor anti slip paint
	Answer: Use Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or Coo-Var Alkali Resisting Primer on concrete.

Dean French on 2017-06-26 10:04:40	Question: Please would you tell me what the finish is like on the Coo Var Sure Grip Anti slip paint is - is it satin, semi gloss or something else please? thanks Dean French
	Answer: It is a matt, aggregated finish.

Azurey on 2016-04-06 10:31:18	Question: Is the non slip surface very rough. I have a 75' length garden where I throw a ball for my dog to run back and forth to me. Would the non slip be too rough on her paws ? also is it easy to clean and sweep off leaves etc.
	Answer: It is a coarse anti-slip finish which can make it tough to clean. If you're looking for something less aggressive we would recommend Rust-Oleum Tarmacoat.

Norma burns on 2016-01-13 08:48:44	Question: How many coats of Coo-Var Suregrip Anti-Slip Floor Paint should I apply on an exterior surface to give maximum protection?
	Answer: Bare surfaces should first be cleaned, prepared and primed as follows; Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Primer on ferrous metals, Coo-Var Floor Paint (thinned 10%) or Coo-Var Alkali Resisting Primer Sealer on concrete. Once suitably primed, apply 2 coats of Coo-Var Suregrip Anti-Slip Floor Paint in the desired colour at 6-10m² per litre/per coat by brush or roller.

Coo-Var Floor Paint

Coo-Var Floor Paint is a resilient and hardwearing single pack floor coating designed to be versatile, easy to use and economical in decorating and protecting surfaces including floors. Suitable for indoor and outdoor use, Coo-Var Floor Paint is compatible over most previous coatings and gives an off gloss finish. Suitable for use on wood,...

£25.83

Shop now