3 pack methacrylate resin system in 4,400+ colours for use as a slip resistant membrane for vehicular traffic on car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc.
| Ordering References | Weight | Min. Order Quantity |
|---|---|---|
| RAL Classic and BS4800 Colours | 20KG | 3 |
| BS381C, RAL Design, NCS | 20KG | 4 |
713 MMA Deck Coat is a three pack Methacrylate resin system, modified to impart toughness, resilience and waterproofing properties to the cured membrane. The abrasion and impact resistance, together with the low temperature flexibility and excellent adhesion to concrete and steel make 713 MMA Deck Coat an ideal material for uses as a membrane subjected to vehicular traffic.
Fast curing, slip-resistant membrane with excellent adhesion to concrete and steel.
Typical uses include as a slip resistant membrane for car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc.
This product is for Professional Use Only.
| Typical Properties | |||
|---|---|---|---|
| Pot life @ 20°C: | 25 Minutes | ||
| Thickness: | Minimum 3mm, maximum 8mm | ||
| Tensile strength: | 6MPa @ 20°C | ||
| Elongation at break: | 180% @ 20°C | ||
| Temperature range during application: | -30°C* to + 40°C | ||
| Temperature range during service: | -40°C to + 60°C | ||
| Chemical resistance: | Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils, and fruit juices | ||
* Refer to our Technical Department for advice on 0113 2455450 (option 2) or send a message to [email protected]
Concrete surfaces shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes, etc.
Blow holes and defective concrete shall be made good using a proprietary repair compound e.g. 710 MMA Repair Mortar. Suitable mechanical treatment, such as vacuum grit blasting, is the preferred treatment prior to application as this ensures a mechanical ‘key’ which will optimise adhesion.
Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish Standard and to provide a medium blast profile.
All dust shall be removed prior to coating application. A coat of 707 MMA Metal Primer shall be applied as soon as practicable after blasting, in order to obviate the possible occurrence of ‘flash rusting’.
Concrete surfaces shall be primed with a coat of 706 MMA Floor Primer, applied by brush, or roller, at a nominal rate of 0.3kg/m². Long nap lambswool rollers are recommended for primer application. Allow primer to cure for a minimum of 40 minutes.
Steel surfaces shall be primed with 707 MMA Metal Primer.
713 MMA Deck Coat is supplied as a three-pack material consisting of the BASE component, the CATALYST component and the FILLER component.
Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means for a minimum of 2 minutes.
Pour the contents into a mixing vessel and add the FILLER component whilst stirring. A low speed drill with paddle attachment may be used or else a forced action mixer e.g. Creteangle type.
Pour the mixed material onto the prepared and pre-primed surface and apply by serrated trowel to the desired thickness. De-aerate the material by spike rollering.
Within 5 minutes, broadcast the appropriate aggregate at a nominal rate of 6kg – 15kg/m². When cured, sweep off excess aggregate.
The application of a clear sealer coat is recommended to reduce tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning where required.
Apply a roller coat of 705 MMA Clear Seal Coat F or 701 MMA Floor Coating at a nominal rate of 0.3 – 0.5kg/m² and allow to cure for a minimum of 2 hours prior to putting back into service.
A second coat maybe necessary where large aggregate has been used as scatter.
Clean equipment with 109 Tool Cleaner immediately after use.
A 20kg pack is sufficient to cover an area of 2.8m² at a thickness of 4mm.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
713 MMA Deckcoat - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
701 MMA Floor Coating is a two pack, fast curing coating designed to provide a dust-free, seamless floor finish with protective and decorative properties on concrete and steel surfaces. The inherent slip resistance of the coating may be enhanced by the incorporation of 504 Standard Anti Slip Aggregate.Also available in 4,000+ colour...
£134.40 (incl. VAT)
£112.00 (ex. VAT)
706 MMA Floor Primer is a rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.Ideal for use as a rapid curing primer for...
£134.40 (incl. VAT)
£112.00 (ex. VAT)
707 MMA Metal Primer is a rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds.Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water...
£134.40 (incl. VAT)
£112.00 (ex. VAT)
710 MMA Repair Mortar is a fast curing, high strength, trowel applied, three component methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.Resilient Very good chemical resistance Excellent adhesion Fast curing, even at low temperatures (down to -10°C*) Impact and abrasion resistant...
£92.16 (incl. VAT)
£76.80 (ex. VAT)
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual productMore...
£52.80 (incl. VAT)
£44.00 (ex. VAT)
