Remmers Epoxy ESD Color 3K

6666

Remmers Epoxy ESD Color 3K is an isotropic or bulk conductive coating for conductive surfaces and ESD protection zones with chemical and mechanical loads that can also be subjected to vehicle traffic.

  • Anti-slipping version possible
  • Suitable for hand pallet trucks and forklift trucks
  • Physiologically harmless once fully cured
  • Used for floor surfaces that require a conductive coating or a coating suitable for ESD
  • Ideal for production surfaces, storage surfaces, workshops, work halls, ESD protection zones, etc.
Colour
Size
£543.90
VAT excluded

£652.68 Tax incl.
Quantity

Description

Remmers Epoxy ESD Color 3K is an isotropic or bulk conductive coating for conductive surfaces and ESD protection zones with chemical and mechanical loads that can also be subjected to vehicle traffic. Remmers Epoxy ESD Color 3K is a special self smoothing epoxy screed for creating ESD compliant surfaces. A 3 component screed, for installation
by suitably experienced and trained specialist installers only.

Remmers Epoxy ESD Color 3K is used for floor surfaces that require a conductive coating or a coating suitable for ESD.

Application examples:

  • Production surfaces
  • Storage surfaces
  • Workshops
  • Work halls
  • Printing companies
  • ESD protection zones

Special colours are available on request but may be subject to minimum quantities, additional cost and extended lead times - contact the Technical Department for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
6666

Data sheet

Manufacturer
Remmers
Interior / Exterior Use
Interior
Application Method
Trowel
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Three-Pack
Product Certifications
Clean room test – particle emissions (ISO Class 4), Clean room test – outgassing, Crack bridging
Pack Size
30KG
Parts
Three
Base Type
Epoxy
Interior/Exterior Use
Interior
Application
Trowel
Touch Dry (at 20°C)
24 hrs
Pot Life (at 20°C)
25 mins
Coverage
2.5kg - 3.0kg per m²
Recommended Thinner/Cleaner
Remmers V101 Thinner
Max. Application Temperature
30 °C
Min. Application Temperature
12 °C
Density
1.60 g/cm³
Touch Dry
24 Hours
UN Number (Activator)
UN3082
UN Number (Base)
UN2735
Attachments
Download
Product Data Sheet
Download
Safety Data Sheet
Download
Safety Data Sheet 2
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Send us your question

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
Trustpilot