Watco Asphalt Paint Rapid (formerly Watco Road Paint Rapid) is a hard wearing chlorinated rubber based exterior coating with a matt finish, that is ideal for coating exterior concrete and asphalt. It is showerproof in only one hour and can be applied at temperatures as low as 5°C. Easy to apply by brush or roller, it offers exceptional wear resistance making it ideal for highlighting traffic areas and parking bays.
Ready for car traffic in only 6 hours and showerproof in only 1 hour
Ideal for busy areas such as public/private car parks, walkways, and school playgrounds
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dirt, oil, laitance and light to medium grease with Watco Bio-D, or for thick deposits of grease use Watco Concroff.
Application
Easily apply by roller or brush. Make sure the lid is not left off the product for any length of time to prevent it drying out.
Limitations
Contains Xylene and is not recommended for use on newly applied Watco Flowtop or similar polymer reinforced screeds. If in doubt, apply to a small test area. Test before using Watco Asphalt Paint Rapid on pre-painted surfaces.
Product Details
9314-947118
Data sheet
Manufacturer
Watco
For Use By
Consumer Use
For Use On
Bare concrete, asphalt
Application Method
Medium pile roller, brush
Sheen
Matt
Single, Two or Three Pack
Single
Pack Size
5L
Touch Dry (at 20°C)
20 minutes
Coverage
5 litres will cover approximately 15m² -18m² at 250-300 microns per pack.
Recommended Thinner/Cleaner
Use a thinner and cleaner based on a Xylene solvent such as Watco TH99 Cleaning Solvent.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Watco Asphalt Paint Rapid is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
A heavy-duty biodegradable cleaner for floor preparation, removes grease and oil from painted or bare concrete.Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most painted surfacesMore Information Delivery Info
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside.Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
Watco Flowtop is designed as an industrial grade overlay for rough, damaged or tamped concrete. It cures to a smooth, non-dusting surface that is tough enough to withstand forklift trucks and can be left as a highly practical industrial finish or overpainted.Large areas of uneven, damaged and unsightly floors can be re-surfaced quickly and...