Sikafloor 20 PurCem is a multi-component, resin rich, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure.
Sikafloor 20 PurCem is a multi-component, resin rich, smooth trowel grade, coloured polyurethane modified, cement and aggregate screed suitable for floors subject to heavy loading, abrasion and chemical exposure. It has a textured aggregate surface providing medium to heavy profile slip resistance and is typically installed at 6 to 9mm thick.
Uses: In areas subject to heavy loading, abrasion and high chemical exposure, to provide a hard wearing surface, such as in:
Food processing plants, in wet or dry process areas, freezers and coolers, thermal shock areas
Chemical plants
Laboratories
Workshops
Suitable for concrete protection providing physical resistance (Principle 5, method 5.1 of EN 1504-9)
Suitable for concrete protection providing chemical resistance (Principle 6, method 6.1 of EN 1504-9)
Features and Benefits:
Fluid consistency requires less labour to install than conventional heavy duty modified PU trowel grade screeds
Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents.
Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40°C (-40°F) up to +160°C (320°F)
Steam cleanable at 9mm thick
Bond strength in excess of the tensile strength of concrete. Concrete will fail first
Rapid one step application. Normally, no concrete primer or sealer required
Can be applied on to 7 to 10 day old concrete after adequate preparation and with a tensile bond strength in excess of 1.5 MPa (218 psi)
Seamless, no additional expansion joints are necessary; simply maintain and extend existing expansion joints up through the Sikafloor PurCem flooring system
Easily maintained
Wide range of application temperatures +10°C - +40°C
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Please Note: All available colours in the PurCem range are approximate to the RAL references NOT exact matches.
Product Details
1564-859657
Data sheet
Manufacturer
Sika
For Use By
Industrial Use
Interior / Exterior Use
Interior Use
For Use On
Concrete
Application Method
Trowel
Sheen
Textured
Single, Two or Three Pack
Three-Pack
Pack Size
32.5KG
Minimum Applied Thickness
6mm
Maximum Applied Thickness
9mm
Coverage
3 - 18kg per m²
Min. Application Temperature
10c
Touch Dry
12 Hours
Base Type
Water-Based
Base Type
Polyurethane
Suitable For Use On
Floors
Suitable For Use On
Concrete
Finish
Textured
Application Method
Trowel
Manufacturer
Sika
Components
3K
Product Type
Coloured Screed
Colour Family
Blue
Colour Family
Yellow
Colour Family
Beige
Colour Family
Green
Colour Family
Red
Colour Family
Grey
Fire Rating
Fire classification report according to EN 13501-1 from Exova Warrington Fire
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
How many meter sq @9mm do u get from the 37kg tubs off purcem 20
Answer from Rawlins’ Technical Team:
A 32.5kg unit of Sikafloor 20 PurCem will cover approximately 1.7m² at 9mm thickness.
David allison on 2019-02-05 18:25:41
Question:
Can this come coloured black and is it smooth enough for office floor environment
Answer from Rawlins’ Technical Team:
Sikafloor 20 PurCem is available in the colours listed on the product page, black is not one of them. However we would also point out that Sikafloor 20 PurCem is a PU/Screed hybrid, typically used for heavy industrial areas, industrial kitchens and cold storage units. It can be applied in an office, however it would be extremely expensive, not very pleasing on the eye and has a slip resistant surface profile. If you can provide some more information on what you're trying to achieve we should be able to offer a suitable alternative for you in black.
Sikafloor 20 PurCem is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Sika Thinner C is a specially formulated blend of solvents designed to mix with its compatible Sika products to create an optimal consistancy for application whether it be for brush, roller or spray. It can also be used for the cleaning of some surfaces prior to application of the coating and/or cleaning of the application tools such as...