

Remmers Crete TF is a solvent-free coating based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression.
Remmers Crete TF is a solvent-free coating based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression. Remmers Crete TF is used in areas requiring good wear and chemical resistance combined with economical cost. It is suitable for chemical storage areas, warehousing, toilets, laboratories, food preparation areas.
Composition
Remmers Crete TF is a polyurethane resin system combined with abrasion resistant fine fillers.
Appearance
Remmers Crete TF provides a smooth matt surface finish in a range of colours. Not colour stable.
Durability
Very good wear resistance can be expected from a two-coat application. Thickness Nominal 0.25mm, dependent upon application rate and number of coats.
Substrates
Remmers Crete TF adheres well to concrete, grano screeds and is designed to seal the Remmers Crete range of products.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.