PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
We no longer stock this product, but can recommend PPG SigmaCover 2 as a great alternative.
Use PPG Nu-Klad Basic is a two-component, solvent-borne epoxy floor coating for industrial floors with light, occasional traffic, where fast-drying and a quick return to service is desired.
Nu-Klad Basic can be overcoated with a polyurethane topcoat for aesthetic durability. The coating dries quickly and can be walked on 6 hours after application.
Thinning the product allows it to be used as a primer for application directly on concrete.
Refer to tables below for information regarding spreading rate and film thickness, overcoating intervals and curing times
Basic data at 20°C (68°F)
Data for Mixed Product | |
---|---|
Mass density | 1.4 kg/l (11.7 lb/US gal) |
Volume solids | 72 ± 2% |
VOC (Supplied) | Directive 1999/13/EC, SED: max. 263.0 g/kg |
max. 361.0 g/l (approx. 3.0 lb/US gal) | |
Recommended dry film thickness | 50 - 150 µm (2.0 - 6.0 mils) |
Theoretical spreading rate | 5.8 m²/l for 125 µm (231 ft²/US gal for 5.0 mils) |
Overcoating Interval | Minimum: 6 hours |
Maximum: 21 days | |
Dry to walk on | 6 hours |
Full Cure | After 7 days |
Notes:
Recommended Substrate Conditions & Temperatures
Substrate conditions of concrete for thinned version
Coated Concrete
Substrate Temperature & Application Conditions
System Specification
Standard system
Openly sprinkled anti-skid system
Note: In case of fully sprinkled an extra layer of 50 µm (2.0 mils) NU-KLAD BASIC, SIGMADUR 520 or SIGMADUR 550 can be applied for a better aesthetical appearance
Instructions For Use
Mixing ratio by volume: base to hardener 80:20
Mixing ratio by weight: base to hardener 86.2:13.8
Application
Anti-skid system
Openly sprinkled anti-skid system
Fully sprinkled anti-skid system
Airless spray
Recommended Thinner
Volume of thinner
Brush
Recommended Thinner
Volume of thinner
Cleaning solvent
Spreading rate and film thickness | |
---|---|
DFT | Theoretical spreading rate |
75 µm (3.0 mils) | 9.6 m²/l (385 ft²/US gal) |
125 µm (5.0 mils) | 5.8 m²/l (231 ft²/US gal) |
Overcoating interval for DFT up to 125 µm (5.0 mils) | |||||
---|---|---|---|---|---|
Overcoating with... | Interval | 10°C (50°F) | 20°C (68°F) | 30°C (86°F) | |
Itself | Minimum | 9 hours | 6 hours | 4 hours | |
Maximum | 1 month | 21 days | 14 days | ||
Polyurethane Topcoat | Minimum | 30 hours | 18 hours | 10 hours | |
Maximum | 21 days | 14 days | 7 days |
Notes:
Curing time for DFT up to 125 µm (5.0 mils) | |||
---|---|---|---|
Substrate temperature | Dry to walk on | Light impact/abrasion | Full cure |
10°C (50°F) | 9 hours | 16 hours | 12 days |
20°C (68°F) | 6 hours | 12 hours | 7 days |
30°C (86°F) | 4 hours | 8 hours | 4 days |
Note: Adequate ventilation must be maintained during application and curing.
Pot life (at application viscosity) | |
---|---|
Mixed product temperature | Pot life |
10°C (50°F) | 5 hours |
20°C (68°F) | 3 hours |
30°C (86°F) | 2 hours |
Safety Precautions
Since improper use and handling can be hazardous to health and cause of fire or explosion, safety precautions included with Product Data/Application Instruction and Material Safety Data Sheet must be observed during all storage, handling, use and drying periods
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
PPG Nu-Klad Basic is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
£42.59 (incl. VAT)
£35.49 (ex. VAT)
PPG Anti Skid Powder, a fine aggregate for use with primarily with Nu-Klad Aqua or Nu-Klad Basic Floor Coatings to help improve grip.More Information Delivery Info
£50.34 (incl. VAT)
£41.95 (ex. VAT)