Rust-Oleum Epoxyshield Cleaner / Degreaser
Rust-Oleum 2901 Epoxyshield Cleaner/Degreaser for floors is a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution.
- Removes grease, oil and other contaminations
- Virtually odour free
- 6-8 m²/l coverage
**Available for delivery - see Delivery Options below**
2901 Epoxyshield Cleaner/Degreaser by Rust-Oleum is for floors is a concentrated, alkaline, non-flammable, virtually odour-free cleaning/degreasing solution.
2901 Epoxyshield Cleaner/Degreaser for floors should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. It should be applied with an artificial sponge, cloth or stiff nylon brush or broom, and can also be used as an additive for high-pressure (steam) cleaning.
6 - 8 m²/l
Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application.
To ensure homogeneity shake well before use. Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. 2901 Epoxyshield Cleaner/Degreaser can be applied with a sponge, cloth, brush, and broom or cleaning machine. When used in combination with a cleaning machine dilute with 50% cold water. After use rinse with plenty of fresh water.
After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system.
Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.
Temperature of air, substrate and material between 5 and 35°C.
- Application Method
- Sponge, Cloth, Nylon Brush, Broom
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Pack Size
- Max. Application Temperature
- Min. Application Temperature
- 9 g/l
- Shelf Life (from date of manufacture)
- 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- UN Number
- Not regulated
- 6 - 8 m²/l
|IAN FAWCETT on 2017-10-04 11:51:28|| |
Question: Rustoleum Epoxy shield cleaner: This is to clean concrete paving on my patio before painting with Rustoleum 7100S as recommended by you. Is it safe for plants and grass?
Whilst the Epoxyshield Cleaner is not particularly aggressive, Rust-Oleum have not conducted any tests to assess the effect this may have on any plants, so are unable to provide any comment in that respect.