RSL Acrydur PR01

    PR01
    RSL10145

    A solvent free, low viscosity, two component Methyl Methacrylate (MMA) based rapid curing penetrating primer designed for use on concrete and cementitious screeds prior to the application of Acrydur flooring systems.

    • Recommended for use as a primer for Acrydur flooring systems which provides excellent adhesion to subsequent coats
    • Excellent penetration and rapid cure
    • Low viscosity and easy to apply
    • Seals pores and capillaries
    • Excellent bond to substrate

    Colour
    Size
    £311.48(ex. VAT)
    £373.78 (inc. VAT)
    Quantity
    Please choose your colour
    This Product is Made to Order, Please Contact our Sales Team on 0113 245 5450

    Description



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Ideal for:
      • Industrial and Manufacturing
      • Retail and Commercial
      • Food and Beverage



    Surface Preparation


    New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.

    Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and making sure all residue of detergent is washed and removed by rinsing with clean water. Local repairs should be carried out using Acrydur RM01 and Acrydur RM02.

    Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. If the old resin flooring cannot be removed then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with the existing floor coating.

    Where Acrydur PR01 is applied to concrete surfaces, care must be taken to ensure that surface preparation is thorough but does not disfigure the surface.



    Priming/Application Conditions


    Acrydur PR01 is for priming substrates prior to the application of Acrydur flooring systems. Porous substrates may require double priming.

    Acrydur PR01 is supplied in pails or drums. Before mixing ideally precondition the Acrydur resin and the Peroxide as well as the fillers and quartz components to a temperature of approximately 15°C to 20°C.

    The application temperature should be -10°C to 35°C throughout the application and the curing period.



    Mixing


    Prior to use, stir the Acrydur to obtain an even distribution of the paraffin contained in the product. With pourable mixes, the Peroxide is the last component to be added in the mix.

    For mortars, add the Peroxide prior to adding the aggregate.

    Pour the appropriate ratio of Peroxide hardening powder into the container of Acrydur resin (see table below). Mix until the Peroxide is completely dissolved.

    Hardener addition % guidance

    TemperatureHardening PowderPot Life/MinutesHardening Time
    -10°C7%2260
    0°C5%1540
    20°C3%1230
    30°C2%1025

    Hardening powder must not be added to the reactive resin and resin/filler mix until immediately before application.

    The hardening powder must always be stirred in and allowed to dissolve in the pure resin. The stirring time will depend on the type and the condition of the mixing equipment used and on the temperature of the material.



    Application


    Acrydur PR01 should be applied evenly by roller, brush and squeegee avoiding any puddles. If a squeegee is used, the surface must always be rolled with a paint roller afterwards.

    Matt and heavily absorbent patches should be reprimed as required wet on wet before hardening ensuring any pores are closed up.



    Product Details
    10145-975317

    Data sheet

    Manufacturer
    RSL
    For Use By
    Professional Use
    Interior / Exterior Use
    Interior Use
    Application Method
    Trowel
    Roller
    Squeegee
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    25 kg
    190 kg
    Mixing Ratio
    The base requires 1-7% hardening powder depending on site conditions
    Coverage
    Typically 0.3-0.5 kg/m2
    Max. Application Temperature
    30°C
    Min. Application Temperature
    -10°C
    Density
    Approximately 0.98 g/cm3
    UN Number
    UN1263
    Layer Thickness
    0.25 - 0.4 mm
    Pot Life
    15 minutes from mixing
    Flashpoint
    10°C
    Base Type
    Solvent-Free
    Suitable For Use On
    Concrete
    Application Method
    Trowel
    Application Method
    Roller
    Application Method
    Squeegee
    Components
    2K
    Usages
    Low Temperature
    Product Usage Type
    Primer
    Product Range
    Acrydur
    Hardening
    30 minutes or once surface has lost tackiness
    Category Guide
    FerFA Category 1
    Bond Strength
    1.5 MPa (Substrate failure)
    Abrasion Resistance
    AR 1 (less than 100 microns wear)
    Impact Resistance
    IR 4
    Reaction to Fire
    Efl-s1
    Colour Family
    Clear
    Categorised As
    Floor Paints > Low Temperature Floor Primers
    Seasonal
    Cold Weather
    Product Type
    MMA
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    RSL Acrydur PR01 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT