Hydron Nu-Base Epoxy Floor Primer
Nu-Base Epoxy Floor Primer has been specifically-formulated to cure in damp conditions, making it an ideal choice to prime structures such as subways and multi-storey car parks, where moisture can linger. Upon proper application, this primer will act as a damp-proof membrane on the floor.
- Cures in damp conditions
- 3-5m²/KG coverage
- "Straw" in colour
**Available for delivery - see Delivery Options below**
Nu-Base Epoxy Floor Primer is ideal for priming floors in damp and cold conditions, such as multi-storey car parks and subways. Despite the damp conditions, this primer will still cure. Being epoxy-based, it will provide a tough undercoat on which to apply the topcoat.
Assuming no water pressure is applied, the Nu-Base Epoxy Floor Primer will act as a damp-proof membrane.
Product Use in the Workplace
- Multi-storey car park - Hundreds of cars wheeling-in rainwater and debris daily, combined with rainfall working its way in can puddle on uneven car park flooring. Sheltered from the sun, and acting as a wind tunnel, these concrete car hotels are prime candidate as a cold and damp environment which can make applying a protective coating tricky. This specially-formulated epoxy primer is designed for use in such damp and cold environments.
- Subway - Cold. Damp. Dreary. No sunlight. This all equates to an environment that needs an epoxy-based floor sealer that is ideal for such environments. Once primer has dried, the topcoat can be applied.
Features & Benefits
- Will cure under damp conditions.
- "Straw" in colour.
- 3-5m²/KG coverage.
- 12-month shelf life.
New floors must be clean, dry and fully cured. Shot blast to provide a surface profile and ensure penetration. Old floors remove all dirt, oil, grease and other contamination by shot-blasting, scarification or mechanical planning.
By brush/roller or airless spray. All equipment should be cleaned with Nu-Base Epoxy Thinners. Conventional thinners and brush cleaners are not effective.
Recommended storage is in a cool, dry place with temperatures between 10-15°C, and in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
- For Use On
- Application Method
- Brush, Roller, Spray
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- Brush, Roller, Spray
- 3-5 m²/KG
- Touch Dry
- 6 hours @ 20°C
- UN Number (Base)
Be the first to ask a question about this product!