Hydron Nu-Base Hydroseal
Nu-Base Hydroseal is the ideal concrete floor sealer to suppress the effect of residual moisture in concrete. For example, if laying down tile flooring on top of concrete, it is first necessary to "seal-in" concrete from moisture, including residual moisture inside the concrete.
- Pubs and clubs
- Industrial warehouses
- Public buildings
**Available for delivery - see Delivery Options below**
Nu-Base Hydroseal, an epoxy resin specifically designed to produce a damp-proof coat on concrete floor, to make ready for a floor covering, for example, carpet, tile, vinyl or wood. Before application, it is recommended that the moisture content of the concrete is tested with a hydrometer. The Nu-Base Hydroseal ideal with hydrometer readings of up to 97% R.H.
Product Use in the Workplace
- New-build homes - Prevention is better than cure; seal-in those brand new concrete floors to reduce any unnecessary costs down the line.
- Domestic kitchens - When new vinyl flooring is to be laid, and application of this Nu-Base Hydroseal will ensure a damp-proof coat, on which to lay vinyl flooring for ultimate peace of mind.
Features & Benefits
- Suppresses the effect of residual moisture in concrete.
- FeRFA Class Type 3.
Life of Product
The Nu-Base Hydroseal has a shelf life of 12 months so long as it kept sealed in its original container. Beware though, because this is an epoxy coating, it has a pot life of 60 minutes @ 20ºC.
All surfaces should be clean, dry and free from oil and grease etc. Ideally the substrate should be shotblasted, scarified or scabbled first to provide a sound surface with a good mechanical key. All traces of concrete hardeners must be removed, and the surface must vacuumed to remove all traces of concrete dust. The area must be protected against further contamination prior to application.
By brush/roller or hand trowel. All equipment should be cleaned with epoxy thinners immediately after use.
Recommended storage is in a cool, dry place with temperatures between 10-15°C, and in accordance with the Highly Flammable Liquids and Liquefied Petroleum Gases Regulations 1972.
- Interior / Exterior Use
- For Use On
- Application Method
- Brush, Roller, Trowel
- Single, Two or Three Pack
- Pack Size
- Brush, Roller or Hand Trowel
- 4m²/KG @250 microns.
- Touch Dry
- 6 hours @ 20°C
- UN Number (Activator)
- UN Number (Base)
Be the first to ask a question about this product!