Smartkote EP90 Universal Epoxy Primer
    • Smartkote EP90 Universal Epoxy Primer

    Smartkote EP90 Universal Epoxy Primer

    EP90
    SMA3832

    Smartkote EP90 Universal Epoxy Primer, an easy to use two-pack primer for all polyurethane topcoats that provides excellent adhesion to a variety of substrates with the flexibility required for urethane.

    • Pre-weighed components; simply add Part B to Part A and mix
    • Exceptional bond strength to urethanes - high adhesion especially to metal and concrete
    • Flexible – won’t crack
    • Excellent resistance to chemicals and solvents, prevents rust and corrosion
    • Excellent capacity to repel water
    • Adhesion to green and damp concrete

    Colour
    Size
    Finish
    £32.78(ex. VAT)
    £39.33 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Smartkote EP90 Universal Epoxy Primer is suitable for all polyurethane topcoats, easy to use, and provides excellent adhesion to a variety of substrates with the flexibility required for urethane. The two-part primer contains zinc to inhibit metal corrosion.

    Ideal for concrete, plaster, metals, wood, stone and existing coatings, EP90 Universal Epoxy Primer provides a cost-effective coverage rate and a fast drying time even at low temperatures, minimal solvent content and low odour suitable for interior spaces.



    Features


    • Pre-weighed components. Simply add Part B to Part A and mix
    • Easy to apply – low viscosity once mixed
    • Fast drying – overcoat in 3-4 hours
    • Exceptional bond strength to urethanes
    • Flexible – won’t crack
    • Excellent resistance to chemicals and solvents
    • Prevents rust and corrosion
    • Excellent capacity to repel water
    • High adhesion especially to metal and concrete
    • Adhesion to green concrete
    • Adhesion to damp concrete
    • Will not taint water or food once cured
    • Lead & heavy metal free



    Uses


    EP90 Universal Epoxy Primer is suitable for interior and exterior use with urethane coatings on walkways, open areas and flat concrete roofs.

    Suitable Substrates

    Check the product data sheet for surface preparation guidelines.

    • Steel
    • Galvanized Iron
    • Aluminum
    • Concrete
    • Wood
    • Fibre-glass
    • PVC
    • Glazed tiles
    • Gloss Paints and Varnish
    • Ferrous metals
    • Stone



    Application


    • Open Part A and stir gently for 1 minute or until homogenised
    • Open Part B and pour the contents into the product in the Part A tin
    • Stir mixture for 2 minutes or until well homogenised
    • (Optional) Pour mixture into paint trays, separating mixture into parts according to the number of workers present
    • Paint a single, thin coat onto the substrate, spreading out the material as much as possible without missing any areas
    • Clean the equipment
    • Allow unused material to cool for 2 hours before disposing of in normal waste to land fill site.

    Notes

    • The pot life is 45-60 minutes. Normally it takes 10 minutes to cover a square meter, so if using a 4L pack it may require two people painting simultaneously.

    Take care when opening as contents may be under pressure.

    Wear safety goggles and protective gloves.

    After substrates have been prepared, ensure they are completely dry, tests for adhesion have been completed and areas not to be coated have been masked off.

    Stir well before use using a flat paddle.

    If in doubt apply a test patch of EP90 Universal Epoxy Primer to ensure the substrate has been properly prepared and primed. Check adhesion of the coating by cutting a small X in the coating using a utility knife. Firmly apply a piece of packaging tape over the centre of the X cut, then pull off with a fast snap. The adhesion is suitable if no significant coating is removed beyond the X cut. If the coating fails this test, then additional surface preparation is required – repeat the surface preparation steps above.



    Coverage


    • 6-8m² per litre per coat. Applied in a single application.
    • Coverage will vary depending on the porosity and profile of the surface.



    Drying Times


    Drying schedule at 150 microns WFT

    6°C20°C
    Can be overcoated in8 hours3 hours 30 minutes
    Tack free time12 hours4 hours

    Curing Times

    At 20°C - The coating will be suitable for overcoating in 3 hours 30 minutes and touch dry in about 4 hours.

    At 6°C - the coating will be suitable for overcoating in 8 hours and touch dry in about 12 hours.

    Product Details
    3832-477386

    Data sheet

    Manufacturer
    Protectakote
    For Use By
    Consumer Use
    For Use On
    Galvanized Iron, Aluminum, Concrete, Wood, Glazed Tiles, Fibre-Glass, PVC, Ferrous Metals, Stone
    Sheen
    Gloss
    Colour
    Standard / Ready Mixed
    VOC Levels
    Low (50-149 g/l)
    Single, Two or Three Pack
    Two-Pack
    Pack Size
    1L
    Dry to Recoat (at 20°C)
    3 hours 30 minutes
    Coverage
    6-8 m2 per litre
    UN Number (Base)
    UN1263
    Pot Life
    45-60 minutes. Normally it takes 10 minutes to cover a square meter; a 4L pack it may require two people painting simultaneously.
    Suitable For Use On
    Steel
    Suitable For Use On
    Ferrous Metals
    Suitable For Use On
    Concrete
    Suitable For Use On
    Glossed Surfaces
    Suitable For Use On
    Aluminium
    Suitable For Use On
    PVC
    Suitable For Use On
    Fibreglass
    Suitable For Use On
    Stone
    Suitable For Use On
    Tiles
    Finish
    Gloss
    Components
    2K
    Usages
    Damp Tolerant
    Product Usage Type
    Primer
    Colour Family
    Grey
    Product Type
    Epoxy
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


    questions Jon-Luke on 2020-06-28 21:08:28
    Question: 

    How long before this product is shower proof outside?

    Answer from Rawlins’ Technical Team: 

    This product is suitable as a primer only and must be overcoated with a compatible topcoat within the designated minimum and maximum overcoating period (min 3.5 hours and max 48 hours @ 20°C).

    Exposure to water within this time could cause the primer to bloom and would then potentially need removing and reapplying.


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Smartkote EP90 Universal Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT