- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Coo-Var Oil Tolerant Primer
103/Q228/1/R
Coo-Var Oil Tolerant Primer is a two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. Designed to improve the adhesion of coatings and screed systems to surfaces that have previously been contaminated with oils, that may still retain some residual contamination.
Product Features
- Enables floor paints and resin finishes etc. to be applied onto concrete that has previously been contaminated with engineering oils.
- Easily applied by brush, roller or trowel edge.
- Can be applied onto substrates with hygrometer readings up to 85% RH.
- Completely solvent free and low odour.
Description
Coo-Var Oil Tolerant Primer is a two-component epoxy resin membrane that is tolerant of residual oil contamination in concrete floors. It is essential that all surface and gross contamination is removed by cleaning with Coo-Var Oil Remover and Coo-Var Industrial Floor Cleaner.
Features & Benefits
- Enables floor paints and resin finishes etc. to be applied onto concrete that has previously been contaminated with engineering oils .
- Easily applied by brush, roller or trowel edge.
- Can be applied onto substrates with hygrometer readings up to 85% RH.
- Completely solvent free and low odour.
Coo-Var Oil Tolerant Primer can be used on concrete floors and fine concrete screeds, of not less than 50mm thick, in the case of unbonded screeds. Coo-Var Oil Tolerant Primer is designed to improve the adhesion of coatings and screed systems to substrates that have previously been contaminated with oils, and have been thoroughly cleaned but may still retain some residual contamination.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Product Details
103/Q228/1/R
Data sheet
- Manufacturer
- Coo-Var
- For Use On
- Concrete
- Application Method
- Brush, Roller, Trowel
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4KG
- Parts
- Two
- Base Type
- Epoxy
- Application
- Roller
- Pot Life (at 20°C)
- 50 Minutes
- Coverage
- 4m² per KG
- Recommended Thinner/Cleaner
- Thinners 16
- Touch Dry
- 24 Hours
- Recommended Wet Film Thickness
- 220 Microns
- UN Number
- UN2735