Coo-Var Profloor Plus Cold Cure
We no longer stock this product, but can recommend 304 WG HD Epoxy Floor Coating as a great alternative.
In stock
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
Coo-Var Power Floated Floor Primer is a water based two pack epoxy primer designed for application to power floated floors. Assists adhesion on clean, laitance free power floated floors and eliminates the need for costly shot blasting or grinding.
- Should be diluted with 10% water for application
- To assist the adhesion of PROFLOOR and PROFLOOR PLUS floor paints to power floated floors
- Ideal in areas where organic solvents are banned
- Low odour
- Floors must be completely laitance free, if for any reason residual laitance is present then this should be removed by using Coo-Var Acid Etch first
Description
Coo-Var Power Floated Floor Primer is a water based two pack epoxy primer designed for application to power floated floors. Assists adhesion on clean, laitance free power floated floors and eliminates the need for costly shot blasting or grinding.
Coo-Var Power Floated Floor Primer should be diluted with 10% water for application.
To assist the adhesion of PROFLOOR and PROFLOOR PLUS floor paints to power floated floors.
Ideal in areas where organic solvents are banned.
Low odour.
Floors must be completely laitance free, if for any reason residual laitance is present then this should be removed by using Coo-Var Acid Etch first.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Details
- Application Details
- Surface Preparation
- Mixing Instructions
- Application Conditions
- Preceding Coat
- Subsequent Coat
Features & Benefits
- Water based
- Two pack
- Epoxy primer
- Designed for application to power floated floors
- Assists adhesion on clean, laitance free power floated floors
- Eliminates the need for costly shot blasting or grinding
- Should be diluted with 10% water for application
- To assist the adhesion of PROFLOOR and PROFLOOR PLUS floor paints to power floated floors
- Ideal in areas where organic solvents are banned
- Low odour
- Floors must be completely laitance free, if for any reason residual laitance is present then this should be removed by using Coo-Var Acid Etch first
Product Details
| Product Details | |
|---|---|
| Colour | Opaque when wet, dries clear |
| Typical S.G. (Specific Gravity) | 1.26 @ 20 °C |
| Volume Solids | 46% |
| Wet Film Thickness W.F.T | 100 microns |
| Dry Film Thickness D.F.T | 45 microns |
| Expected Spreading Rate | 35 to 50 sq.m / 5 kilo pack @ 45 microns D.F.T |
| Flash Point | Non-flammable |
| Cure Time: @ Recommended D.F.T | |
| Initial Cure: | 2 to 3 hours @ 20 °C |
| Hard Dry: | 16 hours @ 20 °C |
| Full Cure: | 5 to 7 days @ 20 °C |
| Low Temperature And High Humidity Will Adversely Affect Application, Curing And Performance Of Any Coating. | |
| Potlife | 1.5 to 2 hours @ 20 °C |
| Pot Life - Once The Parts Are Mixed Together The Material Has To Be Used Within The Time Stated. | |
| Minimum Overcoating Time | Minimum 16 hours |
| Voc Content | Below 10g / litre |
| Voc'S (Volatile Organic Compounds) Contribute To Atmospheric Pollution | |
Application Details
| Application Details | |
|---|---|
| Application Restrictions | Do not apply below 10 °C. |
| Method | Brush or shortpile roller |
| Thinner (Max Vol): | Clean water (500 ml) |
| Cleaning Solvent | Water |
| Recoat Interval | Minimum 16 hours |
| Maximum 7 Days | |
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants. Should there be any residual laitance present then this must be removed. This should be done chemically using Coo-Var Acid Etch (see Acid Etch data sheet for details).
New concrete must be allowed to cure thoroughly which can take up to 3 months.
Other surfaces have to be prepared and primed with the suitable primer for that substrates.
If in doubt, please contact our technical support team on 0113 2455450 (option 2) or send a message to [email protected]
Mixing Instructions
You should have two containers: one larger than the other and labelled Hardener. The other smaller one labelled Base.
The contents of the pack marked Base are added to the contents of the larger pack marked Hardener and thoroughly mixed together, preferably by slow speed electric mixer.
After mixing, add up to 500 mls clean tap water to the 5 kilo unit and mix again.
This will make up one 5 kilo unit.
Application Conditions
As dictated by normal good painting practice.
Do not apply if the temperature is likely to drop below 10°C during application or during the drying process.
In confined spaces, provide adequate ventilation during application and drying.
Preceding Coat
Apply Direct
Subsequent Coat
Product Details
5311-873930
Data sheet
- Manufacturer
- Coo-Var
- Water / Solvent Based
- Water
- For Use On
- Concrete
- Application Method
- Brush, Roller
- Sheen
- Semi Gloss
- Colour
- Clear
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Dry to Recoat (at 20°C)
- Minimum 16 hours
- Fully Cured (at 20°C)
- 5 to 7 days
- Pot Life (at 20°C)
- 1.5 to 2 hours
- Coverage
- 35 to 50 sq.m / 5 kilo pack @ 45 microns D.F.T
- Recommended Thinner/Cleaner
- Clean water
- Min. Application Temperature
- 10 °C
- Solids by Volume
- 46%
- VOC
- Below 10g / litre
- Recommended Dry Film Thickness
- 45 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number (Base)
- UN3082
- Specific Gravity
- 1.26 @ 20 °C
- Hard Dry
- 16 hours @ 20 °C
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Floors
- Finish
- Semi-Gloss
- Application Method
- Roller
- Application Method
- Brush
- Components
- 2K
- Product Usage Type
- Adhesion Primer
- Colour Family
- Clear
- Product Type
- Epoxy
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Power Floated Floor Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Coo-Var Profloor Anti-Slip Aggregate Option
Coo-Var Profloor Anti-Slip Aggregate Option is ground mineral powder of specific particle size (0.25 – 0.39mm) to be used to create an anti-slip element to Coo-Var Profloor 2 Pack Epoxy Floor Paint. Product FeaturesAdd to Profloor to produce an anti-slip surface To be scattered evenly Highly Crush Resistant Estimated Coverage: 36-40m²...
£19.19 (incl. VAT)
£15.99 (ex. VAT)
In Stock and Available for Delivery
Coo-Var Profloor 2 Pack Epoxy Floor Paint
Coo-Var Profloor 2 Pack Epoxy Floor Paint is an exceptionally hard wearing water based 2 pack epoxy floor and wall coating. Dries to an off-gloss finish. Seven colours are available plus other colours to order. Aggregate is mixed with paint or sandwiched between two coats for an antislip version. This makes for a very versatile product....
£164.29 (incl. VAT)
£136.91 (ex. VAT)
In Stock and Available for Delivery
Coo-Var Profloor Plus FH
Coo-Var Profloor Plus FH is a fast curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to allow the laying and recoating of a surface within the same working day. It is particularly valuable where rapid return to service is required, or where the economics of a contract require that two coats...
£209.74 (incl. VAT)
£174.78 (ex. VAT)
In Stock and Available for Delivery
Coo-Var Profloor Plus
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abrasion and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem. Anti-slip option available. Ideal uses :...
£198.26 (incl. VAT)
£165.22 (ex. VAT)
In Stock and Available for Delivery
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.Each kit contains:12" Roller,...
£101.58 (incl. VAT)
£84.65 (ex. VAT)
In Stock and Available for Delivery