- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total(ex. VAT)(inc. VAT)£0.00£0.00
We no longer stock this product, but can recommend Watco Powerfloat Primer as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Tor Tortread Powerprime is a high performance epoxy resin system for priming of power-floated concrete, developed to dramatically reduce time and costs associated with expensive floor preparations.
- Completely eliminates the need for costly diamond grinding or shot blasting
- Two-pack, virtually solvent free, water based epoxy resin primer designed for application to smooth, non-porous surfaces which are prone to rejecting paint
Quick Links - Click To Jump To Section:
Features & Benefits
- Primes hard, smooth surfaces ready for painting
- Eliminates the need for costly shot blasting or grinding
- Quick and easy to apply with a one-coat application
- Low odour
- Easily applied by roller
- Can be applied directly to powerfloated concrete and used alone as a sealer or in combination with coloured floor finishes
- Can also be used to promote adhesion on other hard-to-coat surfaces
Application Notes
- Ensure surfaces are sound, clean, dry, properly prepared
- Mix ratio: 1 unit activator to 1 unit base
- Apply with medium pile roller and cut in using a brush
- Coverage: 30 square metres per 5 litre (practical coverage reduce by 20% or more)
- Typical thickness 120 microns dft from 160 microns wet
- Touch dry in 6 hours, hard dry in 12 hours @ 20°C
- Overcoat between 12 hours and 5 days
- Minimum application temperature is 15°C air and 10°C substrate
- Clean equipment with warm soapy water after use
Limitations
- Must be over-coated within 5 days otherwise sanding will be required in order to maintain inter-coat adhesion
- Unsuitable for bare metal
Data sheet
- Manufacturer
- Tor Coatings
- For Use By
- Professional Use
- For Use On
- Concrete Floors
- Application Method
- Roller, Brush
- Sheen
- Glossy
- VOC Levels
- Max 50g/litre, EU limit 140g/litre
- Pack Size
- 5L
- Mixing Ratio
- 1 unit activator to 1 unit base
- Touch Dry (at 20°C)
- 6 hours
- Dry to Recoat (at 20°C)
- 12 hours - 5 days
- Pot Life (at 20°C)
- Up to 2 hours
- Coverage
- 30 square metres per 5 litre (practical coverage reduce by 20% or more)
- Recommended Thinner/Cleaner
- Warm soapy water
- Min. Application Temperature
- 15°C Air, 10°C Substrate
- Solids by Volume
- 75%
- Recommended Dry Film Thickness
- 120 microns
- Recommended Wet Film Thickness
- 160 microns
- Hard Dry
- 12 hours @ 20°C
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Concrete Floors
- Finish
- Gloss
- Application Method
- Roller
- Application Method
- Brush
- Components
- 2K
- Colour Family
- Clear
- Product Type
- Epoxy
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Tortread Powerprime is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT