- There are no more items in your cart
- Shipping Calculated at checkout
- Total £0.00
Sikafloor ProSeal W
85210 , 83637
Sikafloor ProSeal W (from the full range) is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. A one part water dispersed acrylic emulsion to cure, harden and seal fresh or hardened concrete, and can be used in exterior and interior application.
Features and Benefits:
- Excellent moisture retention; meets requirements of ASTM C-309
- Water dispersion
- Suitable for indoor use where solvent-based products cannot be applied because of health and safety regulations
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
- Please Note: This product is currently available on a 7-10 Working Day delivery service only
Description
Sikafloor ProSeal W is a one component higher efficiency, water-based curing, sealing and hardening compound for concrete floors. Sikafloor ProSeal W is used for optimum curing and sealing of fresh concrete floors and structures.
Uses:
- Sikafloor ProSeal W is used for optimum curing and sealing of fresh concrete floors and structures
- Curing compound in order to limit surface drying and cracking
- Provides curing and sealing for Sikafloor® dry shake hardeners
- Anti-dust treatment and improvement of the abrasion resistance of existing concrete surfaces
- Suitable for exterior and interior application
Features and Benefits:
- Excellent moisture retention; meets requirements of ASTM C-309
- Water dispersion
- Suitable for indoor use where solvent-based products cannot be applied because of health and safety regulations
- Helps control dusting for both new and existing concrete floor surfaces
- Effectively cures and seals concrete surfaces in a single, economic operation
- Non yellowing
- Easy application by spray or roller
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Product Details
85210 , 83637
Data sheet
- Manufacturer
- Sika
- Interior / Exterior Use
- Interior
- Water / Solvent Based
- Water
- For Use On
- Concrete
- Application Method
- Brush, Roller, Spray
- Colour
- Clear
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 25L, 200L
- Coverage
- 5 - 10m² per litre
- Touch Dry
- 45 mins
- UN Number
- N/A
 Ian Grant on 2018-03-26 17:38:37 | Question: Dear Colleague, I would like to know how SIKA ProSeal W used to seal a smooth screed floor will dry? I would like to avoid a high gloss finish, but a light sheen/satin would be OK. The other product that has been recommended by the screed manufacturer (Cemfloor) is SIKA Proseal 90 PDS I would very much like to know your opinion regarding the final finish of each product. Many thanks for your help with this. Regards, Ian Grant |
Answer: Sikafloor ProSeal W will not be as high gloss as the other ProSeal's due to being waterbased. Therefore it will leave more of a sheen finish rather than a gloss. If in doubt carry out a small trial area in an inconspicuous area first. | |
