314 Clear Floor Sealer
  • 314 Clear Floor Sealer

314 Clear Floor Sealer

RAW314
RAW934

314 Clear Floor Sealer is a clear floor coating for suitably prepared concrete, wood, metal and GRP to help with the prevention of dusting.

  • Single pack
  • Internal or external use
  • Ideal where a low cost sealer is required
  • Touch dry in 4 hours @ 20 °C
  • Semi-gloss finish

Colour
Size
£79.20(ex. VAT)
£95.04 (inc. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

Description

314 Clear Floor Sealer is a clear floor coating for suitably prepared concrete, wood, metal and GRP to help with the prevention of dusting.

314 Clear Floor Sealer is ideal where a low cost sealer is required. Suitable for interior and exterior use.



Quick Links - Click To Jump To Section:




Features & Benefits


  • For suitably prepared concrete, wood, metal and GRP
  • Semi-gloss finish
  • Single pack
  • Internal or external use
  • Touch dry in 4 hours @ 20 °C
  • Ideal where a low cost sealer is required



Typical Properties


Technical Data
  314 Clear Floor Sealer
Specific Gravity: 1.11 @ 20 °C
Volume Solids: 59%
Wet Film Thickness: 100 microns
Dry Film Thickness: 50 - 60 microns
Typical Viscosity: 4.5 Poise @ 25 °C
Flash Point: Above 32°C (closed cup)
V.O.C. 337g/litre



Coverage


  • Expected spreading rate of 11-12m²/litre at 50 microns dry film thickness
  • The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application



Surface Preparation


  • All surfaces should be clean, dry, sound and free from contaminants
  • Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint
  • This can be done mechanically by abrading or blasting, or chemically using Acid Etch
  • These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance
  • New concrete must be allowed to cure thoroughly which can take up to 3 months



Mixing:

  • Mix well before use



Priming:

  • 10% thinned 314 Clear Floor Sealer



Application


  • As dictated by normal good painting practice
  • Do not apply if the temperature is likely to drop below 7 °C during application or during the drying process
  • In confined spaces, provide adequate ventilation during application and drying



Subsequent Coat:



Cleaning


  • White Spirit



Curing


Drying Times
  314 Clear Floor Sealer
Touch Dry: 4 hours @ 20 °C
Hard Dry: 12 hours @ 20 °C
Full Hardness: 5-7 Days @ 20 °C
Minimum Overcoating Time: 16 hours/overnight dry



Low temperature and high humidity will adversely affect application, drying and performance of any coating.



Storage & Shelf Life


  • Keep container tightly closed, in a cool, well ventilated place
  • Keep containers upright
  • See section 7.2 of the Safety Data Sheet for further information



Health & Safety


  • Please refer to Material Safety Data Sheet for information
  • 314 Clear Floor Sealer shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
934-37252

Data sheet

Manufacturer
Rawlins Paints
For Use By
Consumer Use
Interior / Exterior Use
Exterior & Interior
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Solvent
For Use On
Concrete, Wood, Metal, GRP
Application Method
Brush, Roller
Sheen
Semi-Gloss
Colour
Clear
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Dry to Recoat (at 20°C)
16 hours/overnight dry
Fully Cured (at 20°C)
5-7 Days
Coverage
11-12m²/litre
Recommended Thinner/Cleaner
White Spirit
Solids by Volume
59%
VOC
337g/litre
Touch Dry
4 Hours
Recommended Dry Film Thickness
50 - 60 microns
Recommended Wet Film Thickness
100 microns
UN Number
UN1263
Specific Gravity
1.11 @ 20 °C
Viscosity
4.5 Poise @ 25 °C
Hard Dry
12 hours @ 20 °C
Base Type
Solvent-Based
Exterior / Interior Use
Exterior & Interior Use
Suitable For Use On
Metal
Suitable For Use On
Wood
Suitable For Use On
Timber
Suitable For Use On
Concrete
Suitable For Use On
GRP Glass-Reinforced Plastic
Finish
Semi-Gloss
Application Method
Roller
Application Method
Brush
Components
1K
Product Type
Sealer
Fastest Delivery
Next Working Day
Product Category
Paints
Colour Family
Clear
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Joanna on 2018-08-04 03:19:54
Question: 

It this 314 Clear Sealer meant to be a tan brownish coloured liquid?

Answer from Rawlins’ Technical Team: 

In the tin yes, stir well and apply and the product dries clear.


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

314 Clear Floor Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Coo-Var Acid Etch

Coo-Var Acid Etch is a careful blend of acids and wetting agents in solution, used to clean and ‘etch’ concrete/mortared floors and pools prior to painting. Used to prepare new and smoothed concrete. Product Details Removes laitance from concrete/render Removes salts from concrete/render Can be used as a degreaser Removes patches of oil...

Price £26.33 (ex. VAT)
In Stock and Available for Delivery

301 Industrial Floor Paint

301 Industrial Floor Paint is a single pack, easy to use floor paint which dries to a semi-gloss finish. For use on masonry, wood, cement, concrete and many other surfaces Easy to use, versatile and economical Available in 8 colours Touch dry in just 2 hours @ 20 °C No primer required for concrete (just dilute 1st coat with 10% white...

Price £42.72 (ex. VAT)
In Stock and Available for Delivery