Jotun Jotafloor Topcoat

Manufacturer:

Jotun Jotafloor Topcoat is designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Ideal for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities, dairies, warehouses, factories and hangars.

Bulk Buy

£53.97 tax excl.

£64.76   tax incl.
Select a different colour

Close colour picker

Product Description

Jotun Jotafloor Topcoat is a two component amide cured epoxy coating that is a high performance product. It is easy to apply, tintable in a wide range of colours and has excellent gloss and colour retention. It has good chemical, abrasion and impact resistance. If slip resistance is required Jotafloor Non Slip can be used in the system. To be used as topcoat in atmospheric environments. Suitable on approved primers on concrete substrates.

Jotun Jotafloor Topcoat is designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Ideal for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing facilities, dairies, warehouses, factories and hangars.

Approvals and certificates

  • Determination of Bond strength to host concrete - BS 1881 : Part 207
  • Determination of Crack Bridgeabilty - ASTM C884
  • Determination of Rapid Chloride Permeabilty - AASHTO T277
  • Determination of Water Permeabilty - DIN 1048
  • Determination of Acid or Alkali Reaction - ASTM D543
  • Determination of Weather or Salt Spray Test - N.F.C. Standard
  • Determination of Impact Resistance - ISO 6272
  • Determination of Shore 'A' hardness - ASTM D2240
  • Determination of Taber Abrasion (1,000 Cycles) - ASTM D4060
  • Determination of Toxicity - BS 6920
  • Determination of Flame Spread - ASTM D1360

Additional certificates and approvals may be available on request.

Features & Benfits

  • Good chemical resistance
  • Good abrasion resistance
  • Vast colour choice

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)10m² per litre
Touch Dry1.5 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



questions geoff stedman on 10/07/2018
Question: 

Hi Would you need to prime a concrete floor that already has a floor paint applied? paint is stable and not flaking. Also what product would you recommend to recoat steel plate that is a walkway in a boilerhouse? Many thanks

Answer: 

To secure lasting adhesion to the subsequent product all surfaces should be clean, dry and free from any contamination. Jotun Jotafloor Topcoat would not require a primer to be applied before application to a clean, dry and undamaged compatible coating (ISO 12944-4 6.1), however we would recommend abrasion first to provide an adequate key for adhesion.


We would recommend something like Smartkote Protectakote UVR for your steel plate.

questions Tim Maynard on 26/04/2018
Question: 

Hi Again! I think I need to re-word my previous questions: 1. Can JotaFloor Topcoat be applied directly to clean concrete? Or does it need a primer coat first? 2. I understand what Component A & B mean, but on Jutun website it shows varying pot life based on "Comp B (20)" and "Comp B (40)". What does that mean? Many Thanks! Tim

Answer: 

Before application to a bare, prepared concrete floor Jotun Jotafloor Sealer or Jotun Jotafloor Solvent Free Primer should be applied. The pot life for Jotun Jotafloor Topcoat supplied in the UK is 8 hours at 23°C.

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable