Sikafloor 381 is a two part, self smoothing epoxy coating that is highly chemically and mechanically resistant for concrete and screed surfaces in bund areas, for protection against water contaminating liquids. Find more Sikafloor systems, here.
303 Epoxy Floor Paint
303 Epoxy Floor Paint is a high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. Available in standard and winter grade versions.
303 Epoxy Floor Paint is a high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. 303 Epoxy Floor Paint may be easily applied by brush, roller or airless spray, to provide a decorative, abrasion and chemically resistant coating of excellent durability.
303 Epoxy Floor Paint leaves a smooth satin finish when dry. Anti-slip properties of the coating can be enhanced by the addition of 508 Fine Particle Anti-Slip Additive which can be mixed in with coating prior to application – Refer to the ‘Slip Test Results’ section of the product data sheet for more information.
Note: 303 Epoxy Floor Paint in some cases may be applied to newly laid concrete (after 7 days) by incorporating a coat of 401 Epoxy Floor Primer first – contact our Technical Department for full details.
A Winter Grade version of this product is also available for applications in lower temperatures or when an especially quick return to service is required.
- May be applied to dry or damp surfaces
- Available in a wide range of colours
- Low odour
- Easily applied
- Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents.
- Very good adhesion to concrete
- Hygienic and easily cleaned.
- Matt and Gloss options
- Slip resistant options
- As a floor covering in food factories, abattoirs, dairies, laboratories, warehouses, etc.
- As a chemically resistant coating for bund areas.
- As a hygienic, easily cleanable surface on walls, ceilings etc.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|john hill on 07/07/2016|| |
Hi, We are using the mid green 303 epoxy paint for pedestrian walkways but we have an area where fork lifts will cross the walkway a few times per day. Is the 303 good enough to stand up to some FLT traffic or which paint should I be using for this area? and do you have a colour match for that paint to the mid green or the RAL code for Mid green? Kind Regards - John
Our 303 Epoxy Floor Paint is more than capable of dealing with the level of traffic you have described, however if you wished to increase the durability additional coats of our 304 HD Epoxy Floor Coating.
The Mid Green colour in our 303 or 304 Epoxy floor coatings is an in house colour but would be closest to RAL 6002 Leaf Green.
Sikafloor 390 is a 2-part, flexible and chemically resistant, coloured epoxy coating. It is crack-bridging and chemically resistant for concrete and screed surfaces in bund areas for the protection against water contaminating liquids.
Sikafloor 21 PurCem is a multi-component, medium to high strength coloured polyurethane modified, cement and aggregate screed with self-smoothing properties. From the Sikafloor product range, this has an aesthetic, easy to clean, smooth textured aggregate surface providing medium slip resistance.
304 HD Epoxy Floor Coating is a two-pack solvent-free high-build epoxy resin system for application as a heavy duty floor coating for concrete, steel and other substrates. It will provide a chemical and abrasion resistant smooth gloss finish.
A high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance. Advantages Ideal for use as a floor sealer Hard-wearing Produces a tough...
Resuscreed 45 is a heavy duty, epoxy resin floor screed which uses a crystalline silica free aggregate, making it more environmentally friendly. Must seal for an impervious finish. ADVANTAGES Less dust than other screeds Low odour Hard wearing Abrasion and impact resistant Can form coving and falls Can be feather edged Can act as a repair system...
Resuthane™ RS69 is a water-based polyurethane resin screed which can cope with liquids of up to 120°C. It is specifically designed to withhold chemical attack, thermal shock and heavy duty abrasion. ADVANTAGES High chemical resistance Resistance to hot water & steam Self sealing Anti-slip Matt finish Very hard wearing Image already added
Sikafloor 350 N Elastic is a two part PUR highly elastic, solvent free, crack-bridging polyurethane resin coating particularly suitable for car park decks, garage floors and bridges etc.
Jotun Jotafloor Topcoat is designed for a wide range of floors with various levels of mechanical and chemical exposure. Specially designed for floors where a dust free, hard wearing and aesthetically pleasing coating is required. Ideal for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, high tech manufacturing...
Sikafloor 31 PurCem is a solvent free polyurethane coating for use as a stand alone, high build coating or as a seal coat for covings and details performed with Sikafloor 29 PurCem or other products in the Sikafloor PurCem range.
R.S. Dampshield FH is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. ADVANTAGES Easy application Use on substrates with hygrometer...
Resuthane™ JT40 is a cove and wall polyurethane resin render designed to be used with Resuthane™ floor screeds, maintaining the high levels of resilience to chemicals and hot temperatures. It is also suitable for radius coves. ADVANTAGES Seamless finish High chemical resistance Resistant to hot water & steam Matt finish Extremely...
Resustat TG69 is a heavy duty, water-based polyurethane resin screed for highly aggressive environments, with anti-static qualities compliant with BS 2050 for industrial applications. ADVANTAGES High chemical resistance Thermal shock and abrasion resistance Resistant to liquids up to 100°C Anti-slip Matt finish Decorative Image already added...
Bradite Floor Finish is a chlorinated rubber floor paint developed for concrete and steel floors. With a multitude of uses, the end result is a tough colourful floor. Advantages Abrasion resistant Water, chemical and oil repellent Resists fungal growth Available in RAL and BS colours ISO 9001:2008 & ISO 14001:200
Sikafloor 3000 is a two-part elastic, aliphatic, solvent free, very low VOC emission certified, self-smoothing polyurethane resin, which is part of the Sika ComfortFloor range. Elastic smooth wearing course for Sika Comfortfloor range, particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices,...
Elladur™ LM is a high-build, Polyaspartic/Polyurea fast-cure, line-marking system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. ADVANTAGES Fast cure at low temperatures Tough, yet flexible Low odour UV stable High build Can be used commercially/industrially Can be used on a range of substrates