304 HD Epoxy Floor Coating
Condition: New product
Manufacturer: Rawlins Paints
304 HD Epoxy Floor Coating is a two-pack solvent-free high-build epoxy resin system for application as a heavy duty floor coating for concrete, steel and other substrates. It will provide a chemical and abrasion resistant smooth gloss finish.
304 HD Epoxy Floor Coating is a two-pack solvent-free high-build epoxy resin system for application as a heavy duty floor coating for concrete, steel and other substrates. It will provide a chemical and abrasion resistant smooth gloss finish to which 504 Standard Anti Slip Aggregate, 505 Large Anti-Slip Additive or 508 Fine Particle Anti-Slip Additive can be added if required to produce a safe, non-slip finish.
304 HD Epoxy Floor Coating is low odour during application and produces a seamless, hard wearing, hygienic floor finish available in standard and winter grade versions.
- Solvent free, low odour
- Very good chemical resistance
- Excellent adhesion to concrete and steel
- High build
- Tough and durable
- Easily applied
- Hygienic and easily cleaned
- Slip resistant options
- Wide range of colours
- As a waterproof, tough, chemical resistant floor or wall coating in food preparation areas, breweries, abattoirs, bottling factories, warehouses, etc.
- As an internal lining for concrete, steel or brickwork storage tanks containing oils, chemicals, water, raw sewage, etc. It is particularly suitable for chemical bunds.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||3.2m² per KG|
|Touch Dry||24 Hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
|Dan conway on 31/05/2015|
Hi I have used 304 HD Epoxy Floor Coating on my garage floor and put on either too thick or not mixed well enough and after 1 week it remains wet in places, what can I do?
It's very difficult to apply the 304 HD Epoxy Floor Coating too thickly so the most likely cause of patches not drying is the activator not being mixed in thoroughly enough with the base before use. Unfortunately at this stage there isn't a quick fix, you will need to remove any product that hasn't dried completely using scrapers, rags, etc. and then re-prepare and apply more 304 HD Epoxy Floor Coating to bring the patches back in with the rest of the floor.
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close