303 WG Epoxy Floor Paint
Condition: New product
Manufacturer: Rawlins Paints
303 WG Epoxy Floor Paint is a fast curing version of 303 Epoxy Floor Paint designed to be used in lower temperatures or when a fast return to service is required. A high performance, water based epoxy coating for the protection and decoration of floors and walls.
303 WG Epoxy Floor Paint is a fast curing, high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be used in lower temperatures or when a fast return to service is required. 303 WG Epoxy Floor Paint is user and environmentally friendly, containing no solvents and being of a very low odour during application.
303 WG Epoxy Floor Paint may be easily applied by brush, roller or airless spray, to provide a decorative, abrasion and chemically resistant coating of excellent durability.
303 WG Epoxy Floor Paint leaves a smooth satin finish when dry. Anti-slip properties of the coating can be enhanced by the addition of 508 Fine Particle Anti-Slip Additive can be added to the coating (200g per 5kg of 303 WG Epoxy Floor Paint) during mixing prior to application to produce an even and easily cleanable texture to the dried surface.
- Fast curing even at lower temperatures
- May be applied to dry or damp surfaces
- Available in a wide range of colours
- Low odour
- Easily applied
- Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents.
- Very good adhesion to concrete
- Hygienic and easily cleaned.
- Semi-Gloss finish
- Slip resistant options
- As a floor covering in food factories, abattoirs, dairies, laboratories, warehouses, etc.
- Where a fast return to service is required or when application must be carried out in lower temperatures.
- As a chemically resistant coating for bund areas.
- As a hygienic, easily cleanable surface on walls, ceilings etc.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||4m² per KG|
|Touch Dry||3 Hours|
|Application||Brush, Roller, Spray|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close