Sikafloor 264
  • Sikafloor 264

Sikafloor 264 N

464536

Sikafloor 264 N is a two component, solvent free, high building coating and seal coat system from the extensive Sikafloor range. An economic, coloured epoxy for concrete and cement screeds with normal-heavy wear

Features and Benefits

  • Good chemical and mechanical resistance
  • Easy application
  • Economical
  • Liquid-proof 
  • Gloss finish
  • Slip resistant surface applicable
Colour
  • Current colour: RAL1000 - Green Beige
Choose a colour
Close colour picker
  • RAL1000 - Green Beige
  • RAL1001 - Beige
  • RAL1002 - Sand Yellow
  • RAL1003 - Signal Yellow
  • RAL1004 - Golden Yellow
  • RAL1005 - Honey Yellow
  • RAL1006 - Maize Yellow
  • RAL1007 - Daffodil Yellow
  • RAL1011 - Brown Beige
  • RAL1012 - Lemon Yellow
  • RAL1013 - Oyster White
  • RAL1014 - Ivory
  • RAL1015 - Light Ivory
  • RAL1016 - Sulfur Yellow
  • RAL1017 - Saffron Yellow
  • RAL1018 - Zinc Yellow
  • RAL1019 - Grey Beige
  • RAL1020 - Olive Yellow
  • RAL1021 - Rape Yellow
  • RAL1023 - Traffic Yellow
  • RAL1024 - Ochre Yellow
  • RAL1027 - Curry
  • RAL1028 - Melon Yellow
  • RAL1032 - Broom Yellow
  • RAL1033 - Dahlia Yellow
  • RAL1034 - Pastel Yellow
  • RAL2000 - Yellow Orange
  • RAL2001 - Red Orange
  • RAL2002 - Vermilion
  • RAL2003 - Pastel Orange
  • RAL2004 - Pure Orange
  • RAL2008 - Bright Red Orange
  • RAL2009 - Traffic Orange
  • RAL2010 - Signal Orange
  • RAL2011 - Deep Orange
  • RAL2012 - Salmon Orange
  • RAL3000 - Flame Red
  • RAL3001 - Signal Red
  • RAL3002 - Carmine Red
  • RAL3003 - Ruby Red
  • RAL3004 - Purple Red
  • RAL3005 - Wine Red
  • RAL3007 - Black Red
  • RAL3009 - Oxide Red
  • RAL3011 - Brown Red
  • RAL3012 - Beige Red
  • RAL3013 - Tomato Red
  • RAL3014 - Antique Red
  • RAL3015 - Light Pink
  • RAL3016 - Coral Red
  • RAL3017 - Rose
  • RAL3018 - Strawberry Red
  • RAL3020 - Traffic Red
  • RAL3022 - Salmon Pink
  • RAL3027 - Raspberry Red
  • RAL3031 - Orient Red
  • RAL4001 - Red Lilac
  • RAL4002 - Red Violet
  • RAL4003 - Heather Violet
  • RAL4004 - Claret Violet
  • RAL4005 - Blue Lilac
  • RAL4006 - Traffic Purple
  • RAL4007 - Purple Violet
  • RAL4008 - Signal Violet
  • RAL4009 - Pastel Violet
  • RAL4010 - Telemagenta
  • RAL5000 - Violet Blue
  • RAL5001 - Green Blue
  • RAL5002 - Ultramarine Blue
  • RAL5003 - Sapphire Blue
  • RAL5004 - Black Blue
  • RAL5005 - Signal Blue
  • RAL5007 - Brilliant Blue
  • RAL5008 - Grey Blue
  • RAL5009 - Azure Blue
  • RAL5010 - Gentian Blue
  • RAL5011 - Steel Blue
  • RAL5012 - Light Blue
  • RAL5013 - Colbalt Blue
  • RAL5014 - Pigeon Blue
  • RAL5015 - Sky Blue
  • RAL5017 - Traffic Blue
  • RAL5018 - Turquoise Blue
  • RAL5019 - Capri Blue
  • RAL5020 - Ocean Blue
  • RAL5021 - Water Blue
  • RAL5022 - Night Blue
  • RAL5023 - Distant Blue
  • RAL5024 - Pastel Blue
  • RAL6000 - Patina Green
  • RAL6001 - Emerald Green
  • RAL6002 - Leaf Green
  • RAL6003 - Olive Green
  • RAL6004 - Blue Green
  • RAL6005 - Moss Green
  • RAL6006 - Grey Olive
  • RAL6007 - Bottle Green
  • RAL6008 - Brown Green
  • RAL6009 - Fir Green
  • RAL6010 - Grass Green
  • RAL6011 - Reseda Green
  • RAL6012 - Black Green
  • RAL6013 - Reed Green
  • RAL6014 - Yellow Olive
  • RAL6015 - Black Olive
  • RAL6016 - Turquoise Green
  • RAL6017 - May Green
  • RAL6018 - Yellow Green
  • RAL6019 - Pastel Green
  • RAL6020 - Chrome Green
  • RAL6021 - Pale Green
  • RAL6022 - Olive Drab
  • RAL6024 - Traffic Green
  • RAL6025 - Fern Green
  • RAL6026 - Opal Green
  • RAL6027 - Light Green
  • RAL6028 - Pine Green
  • RAL6029 - Mint Green
  • RAL6032 - Signal Green
  • RAL6033 - Mint Turquoise
  • RAL6034 - Pastel Turquoise
  • RAL7000 - Squirrel Grey
  • RAL7001 - Silver Grey
  • RAL7002 - Olive Grey
  • RAL7003 - Moss Grey
  • RAL7004 - Signal Grey
  • RAL7005 - Mouse Grey
  • RAL7006 - Beige Grey
  • RAL7008 - Khaki Grey
  • RAL7009 - Green Grey
  • RAL7010 - Tarpaulin Grey
  • RAL7011 - Iron Grey
  • RAL7012 - Basalt Grey
  • RAL7013 - Brown Grey
  • RAL7015 - Slate Grey
  • RAL7016 - Anthracite Grey
  • RAL7021 - Black Grey
  • RAL7022 - Umbra Grey
  • RAL7023 - Concrete Grey
  • RAL7024 - Graphite Grey
  • RAL7026 - Granite Grey
  • RAL7030 - Stone Grey
  • RAL7031 - Blue Grey
  • RAL7032 - Pebble Grey
  • RAL7033 - Cement Grey
  • RAL7034 - Yellow Grey
  • RAL7035 - Light Grey
  • RAL7036 - Platinum Grey
  • RAL7037 - Dusty Grey
  • RAL7038 - Agate Grey
  • RAL7039 - Quartz Grey
  • RAL7040 - Window Grey
  • RAL7042 - Traffic Grey A
  • RAL7043 - Traffic Grey B
  • RAL7044 - Silk Grey
  • RAL7045 - Telegrey 1
  • RAL7046 - Telegrey 2
  • RAL7047 - Telegrey 4
  • RAL8000 - Green Brown
  • RAL8001 - Ochre Brown
  • RAL8002 - Signal Brown
  • RAL8003 - Clear Brown
  • RAL8004 - Copper Brown
  • RAL8007 - Fawn Brown
  • RAL8008 - Olive Brown
  • RAL8011 - Nut Brown
  • RAL8012 - Red Brown
  • RAL8014 - Sepia Brown
  • RAL8015 - Chestnut Brown
  • RAL8016 - Mahogany Brown
  • RAL8017 - Chocolate Brown
  • RAL8019 - Grey Brown
  • RAL8022 - Black Brown
  • RAL8023 - Orange Brown
  • RAL8024 - Beige Brown
  • RAL8025 - Pale Brown
  • RAL8028 - Terra Brown
  • RAL9001 - Cream
  • RAL9005 - Black
  • RAL9010 - White
  • RAL9002 - Grey White
  • RAL9003 - Signal White
  • RAL9004 - Signal Black
  • RAL9011 - Graphite Black
  • RAL9016 - Traffic White
  • RAL9017 - Traffic Black
  • RAL9018 - Papyrus White
Size
£166.73
VAT excluded

£200.08 Tax incl.
Quantity

Description

Sikafloor 264 N is a two component, solvent free, high building coating and seal coat. An economic, coloured epoxy applied by roller for concrete and cement screeds with normal up to heavy wear. It also comes in a vast array of colours to suit your aesthetic needs. 

Sikafloor 264 N has been instrumental in protecting underground and multi-storey car parks for over 40 years. They boast that 80% of the car park can remain open during refurbishment, and can be found in various car park multiplexes across Brighton, in Guildford, Chelmsford and the iconic Merrion shopping centre in Leeds. 

Recommended Uses:

  • Storage rooms
  • Assembly halls
  • Maintenance workshops
  • Garages
  • Loading ramps 
  • Multi-storey car parks
  • Hangars
  • Wet process areas (food and beverage)

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
464536

Data sheet

Application
Brush, Roller
Coverage
3 - 4m² per kg
Touch Dry
24 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Brian Stelly on 25/04/2019
Question: 

What is your MFG's warranty for 264 system?

Answer: 

Sika can offer up to 5 years, however there are rules and procedures to follow in order for Sika to provide a material guarantee. If of interest you would need to contact our Technical Department on 0113 2455450 (option 2) or email [email protected] with the details of your project.

questions Nigel Bridger on 29/03/2019
Question: 

How soon can you apply Sika floor 264 onto a new concrete floor?

Answer: 

The product data sheet (available to download from the attachments tab on the product page) states < 4 % pbw moisture content. Test method: Sika®-Tramex meter, CM-measurement or Oven-dry-method. No rising moisture according to ASTM (Polyethylene-sheet). The concrete substrate must be sound and of sufficient compressive strength (minimum 25 N/mm2) with a minimum pull off strength of 1.5 N/mm2. Concrete substrates must be prepared mechanically using abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface.


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Coo-Var Profloor Plus FH

Coo-Var Profloor Plus FH is a fast curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to allow the laying and recoating of a surface within the same working day. It is particularly valuable where rapid return to service is required, or where the economics of a contract require that two coats...

Price £115.97
In stock

Sikafloor 406

Sikafloor 406 is a one part, clear aliphatic, solvent containing, UV resistant, moisture triggered curing polyurethane resin binder used as binder for the “Quartz finish” of the Sika Balcony Premium System. Features and Benefits Moisture triggered Water vapour permeable UV resistant, non-yellowing Weather resistant Abrasion resistant...

Price £202.83
In stock

Sikafloor 416

Sikafloor 416 is a one component, aliphatic, moisture triggered polyurethane that provides a tough, hard finish clear coat for the Sika Balcony Premium and Sika Balcony Fast Cure 1 Systems. Features &amp; Benefits Moisture triggered UV resistant, non-yellowing Weather resistant Abrasion resistant Easy cleanable

Price £233.18
In stock

Britannia Epoxy Floor Primer

Britannia Epoxy Floor Primer will make light work of your hard porous floor surfaces, allowing for much better adhesion. Developed with industrial and showroom floors in mind, where a hard-wearing epoxy coating is required; this primer will form the perfect base in which to apply the coloured topcoat. Advantages Easy application Eco-friendly...

Price £58.73
In stock

Remmers PUR Indu Color D60

Remmers PUR Indu Color D60 is a flexible, solvent free, two component coating on a polyurethane base used in the creation of balcony and deck waterproof membrane systems. PUR Indu Color D60 can be used on concrete, good quality asphalt*, wood, steel and aluminium surfaces. It is normally sealed with a UV resistant PUR top coat to improve its resistance to...

Price £189.27
In stock

Rust-Oleum 9700 Coldmax Rapid (Wintergrade)

Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Wintergrade) ideal when extra protection against traffic and chemicals is needed. This versatile coating can also be used outdoors and in cold rooms and freezers. Overcoatable...

Price £60.09
In stock

Bradite Epoxy Coating

A tough and hard-wearing two-pack epoxy coating with water and chemical resistance. Ideal for use in refurbishing fibreglass swimming pools. Manufactured under the auspices of an ISO 9001:2008 quality &amp; ISO 14001:2004 environmental management systems Available in more than 350 colours in RAL &amp; BS Resistance to heavy traffic and...

Price £72.53
In stock

RSL Resustat Terrazzo

Resustat Terrazzo is a prestige, extremely heavy duty static-dissipative polyurethane floor resin comprised with inert granite aggregates. It produces a seamless, anti-static finish that meets the BS2050 industrial application compliance. ADVANTAGES Chemical Resistant Impact and abrasion resistant Hard wearing Anti-slip Non-taint...

Price £131.80
In stock

RSL Resudeck ST

RSL Resudeck ST (formerly Resudeck) is a two-pack polyurethane floor coating designed for wet environments and is hot water resistant. It also has a durable, flexible finish and is resistant to chemical attack.  Features and Benefits:  High-build Hard-wearing Solvent-free Can be used on concrete, wood and asphalt Anti-slip can be added...

Price £87.86
In stock

Hydron Nu-Base Chlorinated Rubber Line Paint

Nu-Base Chlorinated Rubber Line Paint is a terrific external floor paint that is ideal for structures that require a highly durable protective coating. Advantages Fast-drying Good adhesion and exterior durability Good resistance to petrol, paraffin and mineral oil spillage Formulated for external use on concrete, brick and wood

Price £98.75
In stock

304 WG HD Epoxy Floor Coating

304 WG HD Epoxy Floor Coating is a fast curing version of 304 HD Epoxy Floor Coating designed to be used in lower temperatures or when a fast return to service is required. It is a two-pack solvent-free high-build epoxy resin system for application as a heavy duty floor coating for concrete, steel and other substrates.

Price £82.93
In stock

Rust-Oleum 9100 High Performance Epoxy

Rust-Oleum 9100 High Performance Epoxy is a two-pack, glossy epoxy for metal, walls and floors. It is the most efficient epoxy system providing a very hard coating with high layer thickness giving lasting results with even a single coat application. 

Price £98.77
In stock

Sikafloor 390 N

Sikafloor 390 is a 2-part, flexible and chemically resistant, coloured epoxy coating. It is crack-bridging and chemically resistant for concrete and screed surfaces in bund areas for the protection against water contaminating liquids. Features and Benefits High chemical resistance Crack-bridging Liquid proof

Price £326.19
In stock

Rust-Oleum 9700 Coldmax Rapid (Standard)

Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Standard) ideal when extra protection against traffic and chemicals is needed. Overcoatable after just 4 hours Wintergrade version can be applied as low as -10 °C Excellent...

Price £60.09
In stock

402 WG Damp Proof Coating

402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.

Price £85.05
In stock

RSL Resuprime ST

Resuprime ST (formerly known as Resuprime) is a two-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces.  Features and Benefits: Versatile for many types of application Excellent adhesive properties Easy to apply Can be used as a tack coat for screeds No...

Price £68.19
In stock