Remmers Epoxy Flex PH (formerly Epoxyflex Coating PH) is a resistant coating with residual flexibility for surfaces with vehicle traffic and mechanical loads used for concrete surfaces, e.g. roadways and industrial floors. Ideal for production & storage surfaces, workshops and fabrication halls With static crack-bridging ability Can...
Remmers Crete TF
Remmers Crete TF is a solvent-free coating based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression.
- Used in areas requiring good wear and chemical resistance
- Economical cost
- It is suitable for chemical storage areas;
- Food preparation areas
Remmers Crete TF is a solvent-free coating based upon polyurethane technology which provides excellent resistance to abrasion, chemical attack and other physical aggression. Remmers Crete TF is used in areas requiring good wear and chemical resistance combined with economical cost. It is suitable for chemical storage areas, warehousing, toilets, laboratories, food preparation areas.
Remmers Crete TF is a polyurethane resin system combined with abrasion resistant fine fillers.
Remmers Crete TF provides a smooth matt surface finish in a range of colours. Not colour stable.
Very good wear resistance can be expected from a two-coat application. Thickness Nominal 0.25mm, dependent upon application rate and number of coats.
Remmers Crete TF adheres well to concrete, grano screeds and is designed to seal the Remmers Crete range of products.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior/Exterior Use
- Suitable Substrates
- Concrete, grano screeds
- Brush, Roller
- Touch Dry (at 20°C)
- Pot Life (at 20°C)
- 15 mins
- 0.15 – 0.20kg per m²
- Max. Application Temperature
- Min. Application Temperature
- UN Number
Be the first to ask a question about this product!
RSL Resucoat LM (formerly known as Resuline) is a high-build, fast-curing epoxy coating floor system for applying lines to surfaces. It has a high coloured gloss finish and minimum creep even on textured surfaces. Features and Benefits: One coat Fast setting Glass beads and clear aggregates can be applied Easy to use Colour stability...
Rust-Oleum 5300 Epoxyshield Maxx is a user friendly and easy to apply water-based 2 component epoxy concrete floor coating with an ultimate adhesion and durability: Maximum durability in just 1 coat For medium to heavy traffic Easy to apply, no primer required Long-lasting gloss finish Highly resistant against solvents and chemicals...
Sikafloor 32 Pronto, 2-part PU modified PMMA elastomeric binder for self-smoothing screed, broadcasted systems and levelling mortars based on reactive acrylic resins for flooring and car park deck application. Sikafloor 32 Pronto consists of: Part A: Sikafloor 32 Pronto Resin Part B: Sikafloor Pronto Hardener
Resuscreed QS, formerly known as Decora MS, is a decorative epoxy resin floor screed incorporating multi-coloured aggregates, designed to produce a hard wearing, attractive, impervious sealed surface, sealed with clear resins to provide a matt or gloss finish. More aggregate can be bought by adding RSL Resuscreed QS Aggregates only to your...
FasTop Multi SL23 (formerly known as Resuthane SL23) is a self-smoothing resin floor screed that when installed at 2mm-3mm to a seamless surface, provides excellent anti-slip properties. It is designed to resist very aggressive industrial environments. ADVANTAGES High chemical resistance Resistance to hot water Self sealing Matt finish...
Bradite Rapid is a high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance. Advantages Available in more than 350 colours in RAL &...
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abrasion and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem. Ideal uses : Factories Workshops Garages...
Sikafloor 375 is a two part, solvent free, low viscosity, tough elastic, polyurethane resin for crack bridging, trafficable slip resistant wearing layers in car parks decks, garage floors and bridges. Features and Benefits Good crack bridging ability Mechanically resistant if broadcast Water tight Easy application Solvent free
303 WG Epoxy Floor Paint is a fast curing version of 303 Epoxy Floor Paint designed to be used in lower temperatures or when a fast return to service is required. A high performance, water based epoxy coating for the protection and decoration of floors and walls.
Resutop is a two-pack, high solids, high-build epoxy coating, that creates an attractive chemical resistant heavy-duty industrial floor. ADVANTAGES High-build finish Hygienic and easily cleaned Good colour stability Smooth high gloss finish Low odour Hard wearing Anti-slip aggregate can be added Suitable for sterilising Image...
Coo-Var Profloor Plus Cold Cure is a low temperature curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to cure when the surface temperature is in the range 0 to 10°C. Coo-Var Profloor Plus Cold Cure is particularly valuable for applications at colder times of the year when the cure time of the...
Forms the perfect seal on industrial floors and floors which require the reduction of fungal and bacterial growth, such as in hospitals. Advantages Epoxy resin Good resistance to chemicals FeRFA Class Type 1 Reduces fungal and bacterial growth
Sikafloor 310 PurCem is a multi-component, water-based, coloured polyurethane hybrid topcoat with glossy finish. Used as a top and wear coat layer, Sikafloor PurCem Gloss anti-slip system build-ups and coating on horizontal surfaces (covings). Features & Benefits Good chemical resistance Gloss and scratch resistance surface High...
Elladur™ SF is a high-build, Polyaspartic/Polyurea fast-cure floor coating system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. ADVANTAGES Fast cure at low temperatures Tough, yet flexible Low odour UV stable High build Can be used commercially/industrially Can be used on a range of...