FasTop Multi T150 (formerly known as Resuthane T100) is a three-pack polyurethane coating, that acts as the top coat when refinishing is necessary. When used with other Resuthane screeds, it ensures uniformity in concrete areas.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
FasTop Multi T150 (formerly known as Resuthane T100) is the icing atop the Resuthane polyurethane cake. It can be applied to coves, screeds or concrete to ensure an impeccable finish and create a seamless impression.
Like all Resuthane products, it is incredibly hard wearing, chemical resistant and highly hygienic. It can also be used as a sealer for Resuthane™ JT40. It is ideal for the hard wearing industrial environment.
New Concrete Floors: New concrete must be clean, sound, dry, fully cured and surface laitance removed by vacuum enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm² is required.
Existing Concrete Floors: Remove all dirt, oil, grease, old paint or any other surface contaminants by vacuum enclosed shot blasting, scarifying or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing and make sure all residue of detergent is washed and removed by rinsing with clean water.
Existing Floors (previously coated): All previous coatings and loose floor paints must be removed by mechanical preparation as described in the above section and primed as specified. if the old resin flooring cannot be removed, then please consult with our technical team for advice on intercoat adhesion and suitability, as it may not be compatible with existing floor coating.
Primers are optional for this product if it’s applied directly to a concrete substrate dependant on surface conditions and porosity. If required FasTop Multi Primer should be used which utilises the FasTop Multi components as detailed on the FasTop Multi Systems brochure and the FasTop Multi Primer product data sheet.
Apply FasTop Multi Primer by medium nap roller, brush or squeegee. Work the primer well into the surface ensuring it is fully wetted out and then roll to complete an even coating without any ponding. Two coats may be required to eliminate any dry patches and to create an even sealed surface. The primer should be worked into and around the anchor joints whilst avoiding to filling these with resin.
FasTop Multi T150 may be applied to substrates with a surface temperature in the range of 5-20°C and a relative humidity <90% RH, with a minimum air temperature of 8°C and no condensation. Do not pre-warm this product as working times will be substantially reduced if materials are warm.
NB: Cure times are extended at low temperatures.
For more details on application and mixing, please see the product data sheet, downloadable from the "Data Sheets" tab above.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
RSL FasTop Multi T150 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
FasTop Multi WR (formerly known as Resuthane JT40) is a cove and wall polyurethane resin render designed to be used with Resuthane™ floor screeds, maintaining the high levels of resilience to chemicals and hot temperatures. It is also suitable for radius coves.Seamless finish High chemical resistance Resistant to hot water & steam...
£62.12 (incl. VAT)
£51.77 (ex. VAT)
FasTop Multi T150 (formerly known as Resuthane T100) is a three-pack polyurethane coating, that acts as the top coat when refinishing is necessary. When used with other Resuthane screeds, it ensures uniformity in concrete areas.Brush, roller or squeegee application High chemical resistance Resistance to hot water & steam Excellent...
£67.84 (incl. VAT)
£56.53 (ex. VAT)
Resuprime ST (formerly known as Resuprime) is a two-pack, solvent-free epoxy resin bonding and priming coat. It bonds resin-based screeds and toppings to cementitious and other surfaces. Features and Benefits:Versatile for many types of application Excellent adhesive properties Easy to apply Can be used as a tack coat for screeds No...
£142.30 (incl. VAT)
£118.58 (ex. VAT)
RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood. Easy application Use on...
£176.52 (incl. VAT)
£147.10 (ex. VAT)
