Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required.
Rust-Oleum's hard wearing, washable polyurethane coating (9200) is now also available in convenient 1 litre packaging. Ideal for smaller projects the new convenient 2-component packaging provides the base and activator in one convenient kit and the activator is supplied with a user-friendly spout cap.
Automotive level UV stability; does not yellow
Water-based formula with low odour
High abrasion resistance, extremely scratch resistant
Smooth satin finish with excellent flow
Can be used on floors, walls, stairs, wood and metal
Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on metal. Rust-Oleum Rust-O-Thane 9200 is intended for application on substrates, which are coated with Rust-Oleum or Mathys epoxy or acrylic coatings (e.g. Rust-Oleum 9100 and Rust-Oleum 5401 Epoxy Impregnation Primer or Mathys Pegasol and Pegalink).
The application area consists of coated floors, coated walls and primed metal. Rust-Oleum 9200 Rust-O-Thane assures appropriate protection against solvents, moderate alkalines, weak acids and chemical cleaning.
Rust-Oleum 9200 Rust-O-Thane is especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required.
Features & Benefits
Very durable and UV-resistant, colour and gloss retention
Very easy to clean (also with chemicals)
Very low odour, can be used indoors
High abrasion resistance, low wear
Flexible and impact resistant
Can also be used on floors and walls
Gloss Level: Satin
Solids content in volume: 37 %
Heat Resistance: 90°C (dry heat), above 65°C discoloration may occur
Mixing Ratio: Base : Activator = 5.66 : 1 by volume
Drying Times At 20°C/RH 50%
Touch dry: 2 hours
Dry to handle: 4 hours
Dry to recoat: 24 hours
Fully cured: 2 days
Pot Life: 2 hours for a 5 litre mix at 20°C
Induction Time: 5 minutes
6,2 m²/l at 60 µm dry (depending on colour) for floors.
9,2 m²/l at 40 µm dry (depending on colour) for other applications.
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Remove grease, oil and all other surface contamination using alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand previous coatings that are in good condition to remove gloss and to roughen the surface slightly. Assure that the previous coating is compatible with the RUST-O-THANE 9200 by making a test application. Remove bad adhering coatings by scraping, wire brushing or sanding. (Spot)prime with commended Rust-Oleum or Mathys coatings. The surface must be clean and dry during application.
Max dry film thickness for floors: 75 µm dry, equals 200 µm wet. For walls: 60 µm dry, equals 160 µm wet.
For use on floors submitted to heavy abrasion, standard and medium colours are recommended. In case of deep and/or bright tones (red, yellow, orange, green, blue etc), it is advised to apply a clear topcoat.
The product is not recommended in case of stagnating water and/or immersion
Now also available in convenient 1 litre packaging. Ideal for smaller projects the new convenient 2-component packaging provides the base and activator in one convenient kit and the activator is supplied with a user-friendly spout cap.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Brush, Roller, Spray
Dry to Handle (at 20°C)
Dry to Recoat (at 20°C)
Fully Cured (at 20°C)
6.2-9.2m² per litre
Max. Application Temperature
Min. Application Temperature
Solids by Volume
Heat Resistance (up-to)
90°C (dry heat), above 65°C discoloration may occur
Shelf Life (from date of manufacture)
Base 2 years and activator 1 year from the date of production in unopened cans, if stored in dry, well-ventilated and frost-free areas, not in direct sunlight at temperatures between 5° and 35° C. Opened activator cans must be used within 1 week.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Elladur™ SF is a high-build, Polyaspartic/Polyurea fast-cure floor coating system designed to create an advanced, tough and durable gloss finish in a range of thicknesses.
Fast cure at low temperatures
Tough, yet flexible
Can be used commercially/industrially
Can be used on a range of...
303 Epoxy Floor Paint is a high performance, water dispersible epoxy coating for the protection and decoration of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. Available in standard and winter grade versions.
RSL Resuprime MVT (formerly known as R.S. Dampshield FH) is a faster curing version of R.S. Dampshield, with overcoat times of 6 hours. A two-component epoxy resin primer, it enables even earlier access onto new or existing concrete substrates for screed and coating applications on carpets, tiles, vinyl and wood.
Features and Benefits:...
Sikafloor 381 ECF is a two part, electrostatic conductive self-smoothing, coloured epoxy resin with very high chemical resistance for concrete and screed surfaces in bund areas for the protection against water contaminating liquids and electrostatic conductive wearing layer for areas subject to chemical and mechanical exposure in production...
Sikafloor 263 SL is a two-part, economic, self-smoothing and broadcast system based on epoxy resin. Intended by Sikafloor for concrete and cement screeds with normal up to medium heavy wear, this multi purpose product is suitable for a wide range of applications.
Features and Benefits:
Good chemical and mechanical...
Sikafloor 326 is a two part, solvent free, PUR tough-elastic, low-VOC, self smoothing floor resin that produces a crack-bridging wearing course for industrial floors and car parks.
Features and Benefits:
Flexible and tough-elastic
Good chemical and mechanical resistance
Low VOC emitting
Sikafloor 300 N is a two part, solvent free, low VOC emission certified, elastic, self-smoothing ComfortFloor, PUR resin. Provides an elastic, smooth wearing course for concrete and other cement based substrates for Sika ComfortFloor Decorative and Sika ComfortFloor Decorative Pro.
Features and Benefits:
Very low VOC emission