Coo-Var Profloor Plus Cold Cure
Coo-Var Profloor Plus Cold Cure is a low temperature curing version of Coo-Var Profloor Plus. This two-pack, solvent free epoxy resin coating is designed to cure when the surface temperature is in the range 0 to 10°C. Coo-Var Profloor Plus Cold Cure is particularly valuable for applications at colder times of the year when the cure time of the normal Coo-Var Profloor Plus product is too slow.
Coo-Var Profloor Plus Cold Cure is a low temperature curing version of the Coo-Var Profloor Plus product. This two-pack, solvent free epoxy resin coating is designed to cure when the surface temperature is in the range 0 to 10°C. Coo-Var Profloor Plus Cold Cure is particularly valuable for applications at colder times of the year when the cure time of the normal Coo-Var Profloor Plus product is much too slow.
Coo-Var Profloor Plus Cold Cure floor coating is suitable for use in most industrial environments, on concrete, polymer screeds, asphalt etc. and provides a durable, decorative, attractive and easily cleanable surface. The low temperature of cure makes this product particularly useful in the recoating of areas where it is difficult to maintain a surface temperature above 10°C during the application and curing period.
Being low odour, Coo-Var Profloor Plus Cold Cure is ideal for use in similar areas where Coo-Var Profloor Plus would be used e.g. the food industry for preparation, processing, storage areas, bakeries, dairies and breweries etc. where solvent based products are unsuitable. The hard wearing and chemical/oil resistant properties also make Coo-Var Profloor Plus Cold Cure ideal to use in showrooms, display areas, supermarkets, warehouses and workshops.
Coo-Var Profloor Plus Cold Cure should not be applied in temperatures above 15°C.
Features & Benefits
- Low temperature curing high build coatings are obtainable in one application
- Easily cleaned surfaces, unaffected by strong detergents
- Good colour stability
- Can be disinfected and sterilized,
- Slip resistant and abrasion resistant finishes can be achieved
- Solvent Free
Coo-Var Profloor Plus Cold Cure systems offer excellent chemical resistance against dilute mineral acids, alkalis, detergent solutions and certain solvents.
Coo-Var Profloor Plus Cold Cure achieves the maximum chemical resistance on full cure. Avoid chemical contact or aggressive cleaning within five days of application. Remove chemical spillages as quickly as possible to prevent concentration by evaporation. Contact the Technical Department who can advise on resistance to specific chemicals.
Please Note: This product has a minimum order quantity of 20 x 5kg per colour and is subject to a 7 - 10 working day lead time. Special colours can be produced, but may be subject to a surcharge and extended lead times - Please call the Technical Department for further information on 0113 2455450.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||4-5m² per KG|
|Touch Dry||36 hours at 0°C|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close