Sikafloor 3000 is a two-part elastic, aliphatic, solvent free, very low VOC emission certified, self-smoothing polyurethane resin, which is part of the Sika ComfortFloor range. Elastic smooth wearing course for Sika Comfortfloor range, particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan...
Coo-Var Profloor Plus
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abrasion and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem.
Ideal uses :
- Stadiums and other high wear public places
- Anti-slip option available
Coo-Var Profloor Plus is a heavy duty, low viscosity, solvent free epoxy floor paint with outstanding abraision and chemical resistance. Coo-Var Profloor Plus has the benefit of being solvent free, it is low odour during application which allows usage in areas where taint could be a problem. Ideal for use in factories, workshops/garages, stadiums and other high wear public places. An anti-slip option is available.
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
You should have two containers: one larger than the other and labelled Hardener. The other smaller one labelled Base. The contents of the pack marked Base are added to the contents of the larger pack marked Hardener and thoroughly mixed together. Use a slow speed electric mixer to ensure the items are fully mixed together as poorly mixed product can lead to uncured areas and gel spots. This will make up one 5 kilo unit of Profloor Plus Floorpaint.
As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 10°C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.
Apply direct to ordinary stable concrete. Coo-Var High Performance Primer should be used where the surface is smooth, polished or porous. On Metal use Teamac 2 Pack Zinc Phosphate Primer. Can be used on wood asphalt and tarmac. CooVar Dampshield and Coo-Var Oil Tolerant Primers are also available. See relevant Technical Data
Coo-Var Profloor Plus Floor Paint.
Please Note: Coo-Var Profloor Plus requires professional and careful application. Special colours can be produced, but may be subject to a surcharge and extended lead times - Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- See Safety Data Sheet
- Brush, Roller
- Pot Life (at 20°C)
- 20-30 minutes
- 3.4 - 4m² per kg
- Solids by Volume
- Touch Dry
- 4 - 8 Hours
- UN Number
|Chris Anderson on 15/05/2017|| |
Question: I have recently painted my factory floor with coo-var profloor plus. The paint is subject to heavy traffic including fork lift trucks driving on it. So far the paint is holding up well but has only been down for a week and is very dirty including marks from the fork lift truck tyres. What is the best method of cleaning the paint? I am looking for something which is effective but non-damaging to the paint. Thanks Thanks
Rust-Oleum Floor Cleaner should meet your requirements.
Resustat TG69 is a heavy duty, water-based polyurethane resin screed for highly aggressive environments, with anti-static qualities compliant with BS 2050 for industrial applications. ADVANTAGES High chemical resistance Thermal shock and abrasion resistance Resistant to liquids up to 100°C Anti-slip Matt finish Decorative Image...
Rust-Oleum Mathys Pegasol Quartz is a two-pack, water based, anti-slip floor coating for indoor and outdoor applications, ideal for use on parking spaces, tennis courts, terraces, balconies, etc. Durable Quartz finish Easy application Fast drying Abrasion resistant Odourless
RSL Resuprime OT (formerly known as R.S. Oil Tolerant Primer) is a two-component epoxy resin floor membrane that combats any residual oil that has escaped into a concrete floor. It ensures that no oil will affect a top finish. Features and Benefits: Easy application Application onto substrates with engineering oil contamination...
Sikafloor 405 is a one part, pigmented, highly elastic, solvent containing, UV resistant, moisture triggered curing polyurethane resin coating. Features and Benefits Moisture triggered Highly elastic Crack-bridging Waterproof Water vapour permeable UV resistant, non-yellowing Weather resistant Abrasion resistant with normal use...
Sikafloor 235 ESD is a 2-part coloured epoxy electrostatic, dissipative and tough elastic self-smoothing system for concrete or cement screeds with normal up to medium heavy wear for areas with requirements for a low electrostatic charge (Body-voltage) and dissipative surface. Features and Benefits Body voltage generation < 30 V* Good...
A fast curing, flexible coating for interior or exterior tarmac, asphalt and suitably primed concrete surfaces. Provides a seamless, flexible floor finish that can be trafficked after just 2 hours allowing a fast return to service.
Sikafloor 22 PurCem is a medium to heavy duty, self-levelling polyurethane screed for anti-slip properties. It is a multi-component, coloured polyurethane modified, cement and aggregate screed for obtaining surfaces with a specific roughness and texture. It is broadcast with aggregates to increase surface texture and slip resistance which is...
An epoxy-based coating that's designed for flooring environments that are in heavy use, such as industrial plants, warehouses, educational establishments, factories and laboratories. Advantages Epoxy gloss finish Solvent-free Good abrasion resistance Non-flammable
Rust-Oleum’s strongest coating ever, based on the latest rapid curing polyaspartic technology for inside or outside use. This makes Rust-Oleum 9700 Coldmax Rapid (Wintergrade) ideal when extra protection against traffic and chemicals is needed. This versatile coating can also be used outdoors and in cold rooms and freezers. Overcoatable...
RSL Epo-Flex VJ (formerly known as Resujoint V) is a flexible, thixotropic, two-component epoxy joint sealant designed to accommodate low level movement in vertical and horizontal joints. Features and Benefits: Tough, yet flexible Adhesive Easy to clean Good chemical resistance Accommodates movement Maintains a seamless finish
Resuthane™ RS69 is a water-based polyurethane resin screed which can cope with liquids of up to 120°C. It is specifically designed to withhold chemical attack, thermal shock and heavy duty abrasion. ADVANTAGES High chemical resistance Resistance to hot water & steam Self sealing Anti-slip Matt finish Very hard wearing Image...
402 WG Damp Proof Coating is a fast curing version of 402 Damp Proof Coating designed to be used in lower temperatures or when rapid overcoating/access is required. Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes.
Sikafloor 31 PurCem is a solvent free polyurethane coating for use as a stand alone, high build coating or as a seal coat for covings and details performed with Sikafloor 29 PurCem or other products in the Sikafloor PurCem range. Features and Benefits: Excellent chemical resistance Allows use of severe cleaning regimes in the Food and...
Rust-Oleum 9200 Rust-O-Thane is a satin, water based polyurethane for a very durable and colourfast finish on coated floors, walls and primed metal. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required. Rust-Oleum's hard wearing, washable...
Resuthane™ T100 is a three-pack polyurethane coating, that acts as the top coat when refinishing is necessary. When used with other Resuthane screeds, it ensures uniformity in concrete areas. ADVANTAGES Brush, roller or squeegee application High chemical resistance Resistance to hot water & steam Excellent slip resistant finish...