602 HD Line Marking Paint is a high-performance fast curing line marking paint developed to provide a durable lining material for application to concrete substrates.
Also available in 4,000+ colour options from RAL, BS and NCS
602 HD Line Marking Paint has been developed to provide a durable lining material for application to concrete substrates.
The material is supplied as a two pack system, comprising pre-weighed amounts of base and curing agent. After mixing, an easily applied chemical and abrasion resistant finish is produced.
This product is for Professional Use Only.
Recommended Uses:
As a lining material for industrial and commercial floors
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
0.80 – 0.40kg/m² per coat:
3 - 6m² or 75 – 150 linear metres @ 100mm wide per 2.5kg
Surface Preparation
Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%
Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound and existing paint finishes etc
Blow holes and defective concrete shall be made good using 201 Epoxy Repair Mortar or similar
Existing coatings shall be sound and free from contaminants
Suitable mechanical treatment such as vacuum gritblasting is the preferred treatment prior to application as this ensures a mechanical “key” for the coating
Mixing:
Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means until a uniform colour is achieved
Mixing Ratio:
By Volume - 3.05 Base : 1 Curing Agent
By Weight - 100 Base : 22.5 Curing Agent
Application
Apply by brush or short pile roller at a nominal rate of 0.40-0.80kg/m²
Cleaning
Clean equipment with 109 Tool Cleaner prior to the curing of the coating
Curing
Allow to cure for a minimum of 5 hours @ 20°C prior to light foot traffic access and 10 hours @ 20°C prior to vehicular trafficking
7 days cure @ 20°C is recommended prior to exposure to chemicals
Limitations
Do not apply to wet or uncured concrete surfaces
Do not apply at temperatures of 3°C or less
Storage & Shelf Life
Store in dry conditions at temperatures between 10°C and 25°C
Do not expose to freezing conditions
602 HD Line Marking Paint has a minimum of 12 months shelf life when stored in original, unopened containers in accordance with manufacturer’s instructions
602 HD Line Marking Paint shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Product Details
RAW602
Data sheet
Manufacturer
Rawlins Paints
For Use By
Professional Use
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Solvent
For Use On
Concrete
Application Method
Brush, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-pack
Mixing Ratio
By Volume - 3.05 Base : 1 Curing Agent
Pot Life (at 20°C)
20 Minutes
Coverage
3 - 6m² or 75 – 150 linear metres @ 100mm wide per 2.5kg
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
201 Epoxy Repair Mortar is a high strength, trowel applied, two component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
Pre-packed units – ready to use
Fast curing
Impact and abrasion resistant
Frost resistant and impervious to water
Negligible shrinkage
Images are for illustrative...
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins.
Low Hazard
Low evaporation rate
Excellent solvency powers
80% biodegradable
This product is for Professional Use Only
Images are for illustrative purposes only and may differ from the actual product
More...