A quick drying solvent based line marking paint based on durable resins and low odour solvents. Suitable for indoor and outdoor use, the product can be applied directly to tarmac, sealed concrete, wood and non porous substrates.
604 Thermoplastic Symbols
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of symbols, letters and numbers.
604 Thermoplastic Symbols are an easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of symbols, letters and numbers.
604 Thermoplastic Symbols require only one person and a gas torch to install and are extremely flexible.
Features & Benefits
- Preformed and pre-cut symbols for quick and proffesional looking installation.
- Easy to apply by gas torch
- Can be trafficked within minutes of application.
- Professional, durable, highly visible results
- Easy to apply yourself with basic equipment
- Efficient – minimal waste, buy only what you need
- Practical to use in hard-to-reach spaces
- Anti-Skid & Reflective additives available
- Consistent material colour throughout
- Areas requiring demarcation including but not limited to - factory units, car parks, roads, walkways, playgrounds, etc.
- Bare tarmac, asphalt and concrete floor surfaces
- Interior & exterior
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Elladur™ LM is a high-build, Polyaspartic/Polyurea fast-cure, line-marking system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. ADVANTAGES Fast cure at low temperatures Tough, yet flexible Low odour UV stable High build Can be used commercially/industrially Can be used on a range of substrates
Britannia Line Marking Paint is an excellent paint formulation where line markings on sports surfaces are required. Environments that will find this particularly useful are schools, sports clubs/gyms and outdoor community sports areas. Advantages Assorted colours. 5L and 20L containers. Up to 12-months shelf life.
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of road markings, car park markings and cycleways.
Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².
This excellent slip-resistance paint has been specifically designed for the young budding Tim Henman's, with specific focus on enhancing youngsters' enjoyment of tennis. Advantages 3 Slip resistant rich colours. Matt finish. Water-based acrylic coating. Eco-friendly.
Cataphos FS01 Acrylic is a durable, aromatic free chemical resistant traffic and airport marking paint which is suitable for use on both asphalt, concrete, aged blacktop, thermoplastic coverings, block paving, some wooden floors and most types of painted lines.
Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Coo-Var Acrylic W/B Road Line Paint is a low odour, fast drying, water-thinned acrylic resin-based line marking paint. ADVANTAGES Fast drying Low odour Exterior/Interior use Safer than solvent-based paint Ideal for when organic solvents are restricted
Ennis-Flint Prismo Flexiline Letters and Numbers are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Prismo Flexiline Letters and Numbers provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any time of the...
Ennis-Flint Prismo Flexiline is the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply from standard road markings, to personalised logos and graphics.
Resuline is a high-build, fast-curing epoxy coating floor system for applying lines to surfaces. It has a high coloured gloss finish and minimum creep even on textured surfaces. ADVANTAGES One coat Fast setting Glass beads and clear aggregates can be applied Easy to use Colour stability 200 to 500 microns thickness Image already added
Ennis-Flint PFT Overbanding is a skid-resistant overbanding and crack sealant preformed thermoplastic designed for application to asphalt surfaces to prevent water ingress and progressive fretting. Prevents water ingress instantly, and can be trafficked immediately. Cools and hardens within within minutes.