Ennis-Flint Cataphos Waterbased EP Paint is a user friendly, high solids, fast drying traffic paint formulated specifically for airless equipment and conventional air atomized equipment used in painting roadways, airports, car parks and smaller lane line striping equipment with or without the addition of glass beads for reflectivity and skid resistance.
Rust-Oleum Hard Hat 2300 Marking Aerosols
Fast drying, marking aerosols to be used on metal, concrete, asphalt, gravel, soil, grass, etc. Designed by Rust-Oleum for quick and easy marking of interior or exterior construction and excavation sites, underground utilities, traffic safety and more.
Rust-Oleum Hard Hat 2300 Marking Aerosols
Rust-Oleum Hard Hat 2300 Marking Aerosols are based on a fast drying, lead and chromate free pigments that should be used on metal, concrete, asphalt, gravel, soil, grass, etc. Rust-Oleum Hard Hat 2300 Marking Aerosols are designed for quick and easy marking of interior or exterior construction and excavation sites, underground utilities, traffic safety and more.
Features & Benefits
- For marking difficult and slightly wet substrates
- Up to 70 metres per can
- Best hiding power, touch dry in 20 minutes
- For on metal, concrete, asphalt, soil, grass, wood
- Weather-resistant and watertight
- Upside down spraying system
- Application down to 0°C
- Gloss Level: Matt
- Propellant: Dimethyl ether
- Heat Resistance: 100°C (dry heat)
Drying Times At 20°C/RH 50%
- Touch dry: 20 minutes
- Dry to handle: 4 hours
- Dry to recoat: Within 1 hour or after 48 hours
2 m² per spray can at 25 µm dry, depending on colour
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C. Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Invert can and point spray button at ground or floor. Hold can approx. 10 - 15 cm above the surface to be marked. Press spray button to start spraying. Use a steady even stroke while spraying. After use turn can upright and press spray button for 2 - 3 seconds to clean valve.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Dry to Handle (at 20°C)
- 4 Hours
- Dry to Recoat (at 20°C)
- Within 1 hour or after 48 hours
- 2m² per can
- 630 g/l
- Shelf Life (from date of manufacture)
- 3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 20 Mins
- UN Number
- UN 1950
- 2 m² per spray can at 25 µm dry, depending on colour
Be the first to ask a question about this product!
Tor Stencil Paint for the logo marking of painted wooden pallets. The high opacity matt finish emulsion helps identification of pallets in warehouses, factories, storage containers, etc. Use with stencils to mark logos, digits or letters onto pallets Water-based emulsion Non-flammable Good coverage - 10 square metres per litre Apply by...
Ennis-Flint Bundy Pad Adhesive securely adheres plastic road studs for horizontal paved surfaces of roadways and parking bays, liquifying to provide a bond that is suitable for the markers lifetime. Bundy Pad Adhesive is non-toxic and is ideal for maintenance applications as the ease of installation offers quick repairs for road studs without...
Coo-Var Acrylic W/B Road Line Paint is a low odour, fast drying, water-thinned acrylic resin-based line marking paint. ADVANTAGES Fast drying Low odour Exterior/Interior use Safer than solvent-based paint Ideal for when organic solvents are restricted
A chlorinated rubber line marking paint that is perfect for line marking roads, sports surfaces, airports and playgrounds. Available in all RAL shades gives you the flexibility in its use. Advantages Good adhesion Excellent abrasion resistance Touch dry in 10 minutes
Ennis-Flint Flexiline Thermoplastic Symbols are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Flexiline Thermoplastic Symbols provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any...
Rust-Oleum 2800 Ground Marking Aerosol can be used on metal, concrete, asphalt, gravel, soil and grass, etc. They are not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Rust-Oleum 2800 Ground Marking Aerosols are designed for quick and easy marking of construction and excavation...
Coo-Var Marking Stencils are used in conjunction with Coo-var Road Line Paint. These Stencils offer a simple way to identify and mark safety areas or critical places internally and externally on many different surfaces. Options Available: A-Z packs 0-9 packs Disabled logo
Heskins Glow In The Dark Floor Signs, directional signs to guide personnel down emergency routes and towards fire exits. Useful for dimly-lit areas or those prone to power failure 400mm x 400mm, self-adhesive Quick and easy to install in minutes Faster application than paint and stencil systems Charges from natural and...
Ensure a professional finish by using the Ennis-Flint Gas Torch to apply their thermoplastic markings such as Ennis-Flint Prismo Flexiline. Supplied with 5m hose and 0-4 bar regulator.
RSL Resucoat LM (formerly known as Resuline) is a high-build, fast-curing epoxy coating floor system for applying lines to surfaces. It has a high coloured gloss finish and minimum creep even on textured surfaces. Features and Benefits: One coat Fast setting Glass beads and clear aggregates can be applied Easy to use Colour stability...
Ennis-Flint Cataphos Chlorinated Rubber (Premium) is a highly durable traffic paint for marking applications. Suitable for both asphalt and concrete it is recognised worldwide as the premium chlorinated rubber brand. May also be used on aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints. Fast and easy to apply –...
602 HD Line Marking Paint has been developed to provide a durable, chemical and abrasion resistant line marking coating for industrial and commercial applications to concrete and steel substrates.
Ideal as an effective and quick method for line or spot marking of pothole repairs, car parks, warehouses, sports halls and building sites. No waste Easy adhesion Durable Economical Available in a range of colours yellow, white, blue
Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.