A durable and long-lasting marking paint available in an assortment of rich and aesthetically-pleasing colours, for use on cycle lanes or pedestrian walkways. The eco-friendly solution allows for both internal and external use. Possible Uses Driveways. Pedestrian areas and walkways. Cycle routes and paths. Indoor flooring and walkways....
Blackfriar Professional Line Marking Paint
Blackfriar Professional Line Marking Paint is a quick drying, long-lasting marking paint for bare concrete, asphalt and painted floors. Ideal for factories, schools, car parks and public areas.
- 30 minute drying time.
- Solvent-based with excellent resistance to abrasion and cleaning products.
- Ideal for domestic, commercial and industrial traffic areas.
- Indoor and outdoor use.
- Brush or roller application.
Blackfriar Professional Line Marking Paint is a quick drying and durable paint which provides clear, long-lasting markings on concrete, tarmac and painted surfaces. Ideal for indoor and outdoor use on kerbs, factory floors, car parks, schools and public areas.
Key features & benefits
- Gives a durable finish with excellent resistance to abrasion and harsh cleaning products.
- Indoor and outdoor use.
First ensure the surface to be painted is clean, thoroughly dry, and free from powdery deposits. If you are marking new concrete, make sure its has had at least 6 months to dry out before coating.
Before use, stir the paint well with a broad stirrer. Apply by brush, roller or line marking machine. If applying by brush, apply a generous, even coat with the minimum of brushing. For best results, apply 2 coats. Do not apply this paint in damp, wet, or excessively hot conditions.
Please note that Blackfriar Professional Line Marking Paint is not suitable for use as a floor paint, only for marking lines.
30 minutes in good conditions.
Approximately 6m²/litre per coat depending on the porosity of the surface.
Remove as much product from application equipment as possible before washing. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Blackfriar Professional
- Base Type
- Solvent Based
- Interior/Exterior Use
- Suitable Substrates
- Concrete, Asphalt and Painted Floors
- Brush, Roller
- 6-8m² per litre
- Recommended Thinner/Cleaner
- Do Not Thin
- Touch Dry
- 30 Mins
- UN Number
|Linda on 10/05/2018|| |
Can this be used on a wooden parquet floor in a village hall to mark badminton lines? The floor has recently been refinished with an acrylic floor varnish.
Both Blackfriar Professional Line Marking Paint and Blackfriar Line Marking Spray, will be OK for this application. They will bond to an acrylic varnish and give a good level of durability.
|Andy on 15/03/2018|| |
Hi what is the drying time on this applied on asphalt this time of year?
The product data sheet states 'Dry in 30 minutes under normal conditions (20°C 50% R/H)', to give an accurate answer we'd need to know the estimated temperature and Relative Humidity for your application but assuming it is going to be cooler than 20°C and higher than 50% R/H it could be considerably longer.
|D Parnell on 26/11/2016|| |
Question: Is this line marking paint also fluorescent?
Heskins Warehouse Marker Signs warn personnel of hazards and restrictions in workplaces, attaching to floors, walls and doors. Useful for warehouses, factories, building and construction sites, choose from designs featuring forklift trucks, to ear and eye protection, increasing safety. The signs are quick to install, with minimal disruption to...
Heskins PermaRoute Rolls, part of a complete floor marking system for warehouses, factories, industrial environments, etc, helping to boost workflow, organisation and safety through creation of aisles, walkways and signage to provide a visual aid and safe guidance through areas. Combine with PermaRoute Shapes to create corners, junctions,...
Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².
Coo-Var Road Line Marking Aerosol Paint is a fast drying line marking aerosol for use on many surfaces. Available in six colours. Quickly and easily apply markings to both indoor and outdoor surfaces. Product Features Touch dry within 30 mins Overcoat in 2 hours 6 Colours to choose from Ideal where speed and efficiency are important...
Cataphos FS01 Acrylic is a durable, aromatic free chemical resistant traffic and airport marking paint which is suitable for use on both asphalt, concrete, aged blacktop, thermoplastic coverings, block paving, some wooden floors and most types of painted lines.
Ennis-Flint Flexiline Thermoplastic Lines are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Flexiline Thermoplastic Lines provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any time...
Heskins Glow In The Dark Floor Signs, directional signs to guide personnel down emergency routes and towards fire exits. Useful for dimly-lit areas or those prone to power failure 400mm x 400mm, self-adhesive Quick and easy to install in minutes Faster application than paint and stencil systems Charges from natural and...
Rust-Oleum 2800 Ground Marking Aerosol can be used on metal, concrete, asphalt, gravel, soil and grass, etc. They are not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. Rust-Oleum 2800 Ground Marking Aerosols are designed for quick and easy marking of construction and excavation...
Axalta Highway Epoxy One Pack is a specially formulated, high build marking paint based on a modified one pack epoxy based coating incorporated with durable pigments and anti-slip extenders. It has fast drying, good adhesion and tough film properties and is ideal for fast turn around street lining and road marking applications.
Rust-Oleum Hard Hat 2300 Marking Aerosols are fast drying, marking aerosols to be used on metal, concrete, asphalt, gravel, soil, grass, etc. Designed by Rust-Oleum for quick and easy marking of interior or exterior construction and excavation sites, underground utilities, traffic safety and more. For marking difficult and slightly wet...
Blackfriar Line Marking Spray can be used in car parks, factories, sports fields, sports courts, building sites and more. Fast one-coat coverage, suitable for internal and external use. Product Features Rapid one coat coverage Easy upside down spray action Effective in high traffic areas Non-clogging nozzle Solvent-based
RSL Resucoat LM (formerly known as Resuline) is a high-build, fast-curing epoxy coating floor system for applying lines to surfaces. It has a high coloured gloss finish and minimum creep even on textured surfaces. Features and Benefits: One coat Fast setting Glass beads and clear aggregates can be applied Easy to use Colour stability...
Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane...
Rust-Oleum Stencils are heavy-duty, re-usable letters, numbers and symbols for floor and general marking in warehouses, parking spaces, roads and more. They can be used with all paints, applied with brush or roller and aerosols and are easy to clean.
Heskins PermaStripe Die-Cut Shapes form part of a durable line marking system for warehouse and factory floors and a great alternative to resin or painted lines. Create clearly defined, high-visibility routes for employees to perform duties and guests to pass through work areas safely and effectively, with the flexibility to remove and change...