Heskins Premium & Super Grade Photoluminescent, glow in the dark anti slip tapes with long glow times that are ideal for marking edges of steps, stairs and walkways to help guide personnel during power cuts. Clearly marks hazards, guiding towards exits Anti-slip surface provides extra grip Exceptionally long afterglow performance,...
Coo-Var Acrylic W/B Road Line Paint
Coo-Var Acrylic Line Marking Paint is a water thinned acrylic resin based line marking paint for inside and outside use on concrete, asphalt or tarmac.
- Fast drying
- Low odour
- Exterior/Interior use
- Safer than solvent-based paint
- Ideal for when organic solvents are restricted
Coo-Var Acrylic W/B Road Line Paint is a low odour and fast drying, water thinned acrylic resin-based line marking paint. For inside and outside use on most surfaces including concrete, asphalt and tarmac. Ideal on concrete tennis and sports courts and for marking or segregating specific areas in warehouses, etc.
Coo-Var Acrylic Line Marking Paint is ideal for use where the release of organic compounds is restricted.
- Tennis courts
- Sports courts
- Segregating warehouse areas
- Red (5L only)
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months.
Tarmac - new tarmac needs several months to weather before painting. On porous concrete apply a coat thinned 10% with clean water first to seal the surface.
Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when temperature will be at or below 7 °C during the painting and drying process.
Apply direct to concrete, asphalt or tarmac and wood. On Metal prepare using Coo-Var Water Based All Metals Primer.
Coo-Var Acrylic Line Marking Paint.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Base Type
- Water Based
- Interior/Exterior Use
- 10m² per litre
- Recommended Thinner/Cleaner
- Touch Dry
- 1 Hour
- UN Number
Be the first to ask a question about this product!
Heskins Glow In The Dark Floor Signs, directional signs to guide personnel down emergency routes and towards fire exits. Useful for dimly-lit areas or those prone to power failure 400mm x 400mm, self-adhesive Quick and easy to install in minutes Faster application than paint and stencil systems Charges from natural and...
Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications.
Ennis-Flint Flexiline Thermoplastic Letters & Numbers are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Thermoplastic Letters & Numbers provide all your requirements, for hard wearing, quick and easily applied surface marking...
Tor Stencil Paint for the logo marking of painted wooden pallets. The high opacity matt finish emulsion helps identification of pallets in warehouses, factories, storage containers, etc. Use with stencils to mark logos, digits or letters onto pallets Water-based emulsion Non-flammable Good coverage - 10 square metres per litre Apply by...
The Heskins PermaStripe Line Marking Applicator applies PermaStripe and PermaRoute rolls to warehouse and factory floors efficiently, allowing proper installation of 5S Visual Management Systems, routes, bay marking, etc. Simple to assemble and use Refer to the video for instructions Ideal for use in: Warehouses Factories Stock rooms...
Heskins Photoluminescent Egress Tape, glow in the dark tape for use around doors, handles, skirting boards, step edges, etc, clearly marking escape routes and emergency exits during power cuts and dim lighting conditions. Choose from plain, hazard and arrow designs Super and premium grades available with exceptionally long afterglow...
Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Blackfriar Professional Line Marking Paint is a quick drying, long-lasting marking paint for bare concrete, asphalt and painted floors. Ideal for factories, schools, car parks and public areas. Product Features 30 minute drying time. Solvent-based with excellent resistance to abrasion and cleaning products. Ideal for domestic, commercial...
Heskins Glow In The Dark Arrows help guide personnel towards exits, walkways and stairs in dimly-lit areas, at night, or during powercuts. Printed onto 100mm-diamater self-adhesive discs, they affix to floors and walls quickly and easily. Displays as green and white during the day, glowing in darkness Simple to install, with minimal...
Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².
A durable and long-lasting marking paint available in an assortment of rich and aesthetically-pleasing colours, for use on cycle lanes or pedestrian walkways. The eco-friendly solution allows for both internal and external use. Possible Uses Driveways. Pedestrian areas and walkways. Cycle routes and paths. Indoor flooring and walkways....
Ennis-Flint Flexiline Thermoplastic Symbols are the perfect solution to permanently marking car parks, roads, cycleways, airports, docks and playgrounds etc. Quick and easy to apply, Ennis-Flint Flexiline Flexiline Thermoplastic Symbols provide all your requirements, for hard wearing, quick and easily applied surface marking solutions at any...
Ideal as an effective and quick method for line or spot marking of pothole repairs, car parks, warehouses, sports halls and building sites. No waste Easy adhesion Durable Economical Available in a range of colours yellow, white, blue
Cataphos FS01 Acrylic is a durable, aromatic free chemical resistant traffic and airport marking paint which is suitable for use on both asphalt, concrete, aged blacktop, thermoplastic coverings, block paving, some wooden floors and most types of painted lines.
Heskins Fire Exit Markers, self-adhesive floor markings for highlighting fire exits in factories and warehouses, helping to ensure they remain clear of boxes and clutter. Faster application compared to stencilling, masking and painting Industry-standard anti-slip coating Available in 2 sizes, for single and double doors Pre-printed with...