A quickly assembled 2 wheeled line marking machine, ideal for intricate areas and tight spaces that provides sharp, accurate lines quickly with the Rust-Oleum Line Marking Paint Aerosols.
Ennis-Flint Cataphos Chlorinated Rubber (Premium)
Ennis-Flint Cataphos Chlorinated Rubber (Premium) is a highly durable traffic paint for marking applications. Suitable for both asphalt and concrete it is recognised worldwide as the premium chlorinated rubber brand. May also be used on aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints. Fast and easy to apply – single coat application.
Ennis-Flint Cataphos Chlorinated Rubber (Premium) is a highly durable traffic paint for marking applications. Suitable for both asphalt and concrete it is recognised worldwide as the premium chlorinated rubber brand. May also be used on aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints. A trial patch is always recommended prior to use. It is easy to apply using either brush, roller or spray and has been successfully used on varied schemes such as car parks, roads, runways, railways, ports, factories and schools.
- Highly durable and manufactured to a demanding specification
- Fast and easy to apply – single coat application
- Excellent line definition
- Extensive range of bright, fade resistant colours
- Equipment easily cleaned with Cataphos Solvent
- Can be used in conjunction with glass beads for improved reflectivity
Ennis-Flint Cataphos Chlorinated Rubber (Premium) has more colours, more pack sizes, is quicker drying and higher performing than Cataphos Chlorinated Rubber (Standard).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 50m of 50mm wide line per litre
- Touch Dry
- Brush, Roller, Spray
|Ian Kendrick on 26/07/2018|| |
We are a buisy truck center and are wanting to paint yellow lines on floors within the garage but only have a small time window to get this job done , so we need a fast drying paint , can you help ? Regairds ian Kendrick
Ennis-Flint Cataphos Chlorinated Rubber (Premium) would be an excellent choice for this application based on speed of drying. At touch dry in 10 minutes it is one of the quickest drying paints we offer.
Assuming this area is bare, internal concrete, a longer life expectancy could be achieved from using something like 602 HD Line Marking Paint due to your heavy traffic but drying times would be increased (touch dry in 2 hours).
A chlorinated rubber line marking paint that is perfect for line marking roads, sports surfaces, airports and playgrounds. Available in all RAL shades gives you the flexibility in its use. Advantages Good adhesion Excellent abrasion resistance Touch dry in 10 minutes
Elladur™ LM is a high-build, Polyaspartic/Polyurea fast-cure, line-marking system designed to create an advanced, tough and durable gloss finish in a range of thicknesses. ADVANTAGES Fast cure at low temperatures Tough, yet flexible Low odour UV stable High build Can be used commercially/industrially Can be used on a range of substrates
Coo-Var Acrylic W/B Road Line Paint is a low odour, fast drying, water-thinned acrylic resin-based line marking paint. ADVANTAGES Fast drying Low odour Exterior/Interior use Safer than solvent-based paint Ideal for when organic solvents are restricted
602 HD Line Marking Paint has been developed to provide a durable, chemical and abrasion resistant line marking coating for industrial and commercial applications to concrete and steel substrates.
Axalta Highway Epoxy One Pack is a specially formulated, high build marking paint based on a modified one pack epoxy based coating incorporated with durable pigments and anti-slip extenders. It has fast drying, good adhesion and tough film properties and is ideal for fast turn around street lining and road marking applications.
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of road markings, car park markings and cycleways.
As we're sure you'll agree, playgrounds must be safe, fun, colourful and eco-friendly. This specially-formulated paint is designed for use on tarmac and concrete playground surfaces, and comes in a range of terrific colour shades. Advantages 10 fun colour shades + black and white. Water-based. Matt finish.
Ensure a professional finish by using this propane gas burner from Rawlins Paints to apply thermoplastic markings. Supplied with hose, regulator and clips to attach to your gas canister.
Thermaline, a new preformed thermoplastic road marking, has been developed as part of the Ennis-Flint Thermoplastic products range. Thermaline compliments the road marking programme by its various uses and material makeup. Thermaline is ideal for areas with light traffic, such as playgrounds. It is an easy to apply, durable and cost effective...
Rust-Oleum Stencils are heavy-duty, re-usable letters, numbers and symbols for floor and general marking in warehouses, parking spaces, roads and more. They can be used with all paints, applied with brush or roller and aerosols and are easy to clean.
Stimsonite 381/C80 Inset Road Studs are a two way snow-ploughable road markers made from hardened cast iron housings designed to withstand all climate conditions that can provide retro-reflectivity from linear distances over 300m away and retain specific intensity values above 150 mcd/lux/m².
Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications.
Ensure a professional finish by using the Ennis-Flint Gas Torch to apply their thermoplastic markings such as Ennis-Flint Prismo Flexiline. Supplied with 5m hose and 0-4 bar regulator.