Coo-Var Marking Stencils are used in conjunction with Coo-var Road Line Paint. These Stencils offer a simple way to identify and mark safety areas or critical places internally and externally on many different surfaces. Options Available: A-Z packs 0-9 packs Disabled logo
Ennis-Flint Cataphos Chlorinated Rubber (Standard)
Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications.
Ennis-Flint Cataphos Chlorinated Rubber (Standard) is an economical version of the market leading Ennis-Flint Cataphos Chlorinated Rubber (Premium). Suitable for both asphalt and concrete it is a highly durable traffic paint for marking applications. It may also be used on aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints. A trial patch is always recommended prior to use. Ennis-Flint Cataphos Chlorinated Rubber (Standard) is easy to apply using brush, roller or spray and has been successfully used on varied schemes such as car parks, roads, runways, railways, ports, factories and schools.
- Fast and easy to apply – single coat application
- Excellent line definition
- Available in White or Yellow only
- Equipment easily cleaned with Cataphos Solvent
- Can be used in conjunction with glass beads for improved reflectivity
Ennis-Flint Cataphos Chlorinated Rubber (Premium) has more colours, pack sizes, is quicker drying and higher performing than Ennis-Flint Cataphos Chlorinated Rubber (Standard).
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Typical Coverage (per coat)
- 50m of 50mm wide line per litre
- Touch Dry
- Brush, Roller, Spray
Be the first to ask a question about this product!
An easy to apply, preformed thermoplastic road and surface marking material. Ideal for fast permanent installation or re-instatement of road markings, car park markings and cycleways.
Stimsonite Road Stud Adhesive is a high performance hot-melt modified bituminous product used to bond Stimsonite road studs to both asphalt and concrete in temperate climates. Stimsonite Road Stud Adhesive exhibits improved flexibility at low temperatures, while retaining good flow resistance. When melted it forms a highly adhesive...
Axalta Highway Epoxy One Pack is a specially formulated, high build marking paint based on a modified one pack epoxy based coating incorporated with durable pigments and anti-slip extenders. It has fast drying, good adhesion and tough film properties and is ideal for fast turn around street lining and road marking applications.
The ultimate line marking applicator - precise, fast and durable. A robust and professional quality 4 wheeled line marking machine that provides sharp, accurate lines with the Rust-Oleum Line Marking Paint Aerosols.
As we're sure you'll agree, playgrounds must be safe, fun, colourful and eco-friendly. This specially-formulated paint is designed for use on tarmac and concrete playground surfaces, and comes in a range of terrific colour shades. Advantages 10 fun colour shades + black and white. Water-based. Matt finish.
Thermaline, a new preformed thermoplastic road marking, has been developed as part of the Ennis-Flint Thermoplastic products range. Thermaline compliments the road marking programme by its various uses and material makeup. Thermaline is ideal for areas with light traffic, such as playgrounds. It is an easy to apply, durable and cost effective...
Ennis-Flint PFT Overbanding is a skid-resistant overbanding and crack sealant preformed thermoplastic designed for application to asphalt surfaces to prevent water ingress and progressive fretting. Prevents water ingress instantly, and can be trafficked immediately. Cools and hardens within within minutes.
Ennis-Flint Prismo II Road Studs are aluminium reflecting road studs which are resistant to the corrosive effects of salt and grit and fully compliant with BS EN 1463-2:2000 (S1, R1). Designed for easy installation and stability they are fixed to the road surface with an anti-twist stem and suitable for centre line, edge marking or lane...
Ensure a professional finish by using the Ennis-Flint Gas Torch to apply their thermoplastic markings such as Ennis-Flint Prismo Flexiline. Supplied with 5m hose and 0-4 bar regulator.
Ennis-Flint Prismo Temporary Road Studs are BSEN 1463 compliant with self adhesive stick-on pads for easy application. The stud body is fluorescent to give excellent day and night time visibility. Ennis-Flint Prismo Temporary Road Studs are used on contra flows and areas within road works to designate lanes.
A chlorinated rubber line marking paint that is perfect for line marking roads, sports surfaces, airports and playgrounds. Available in all RAL shades gives you the flexibility in its use. Advantages Good adhesion Excellent abrasion resistance Touch dry in 10 minutes
Coo-Var Road Line Marking Aerosol Paint is a fast drying line marking aerosol for use on many surfaces. Available in six colours. An ideal line coating where speed and efficiency are important. Top Features Touch dry within 30 mins Overcoat in 2 hours 6 Colours to choose from