Watco Compact Speed Bumps

    XESB
    WAT9363

    A cost effective solution for increasing safety in car parks. Suitable for concrete and asphalt road surfaces and available in 500mm wide segments to suit any road width.

    • Slows traffic to 10mph
    • Withstands 40 tonne HGVs
    • Fixings supplied
    • Can be seen in the dark

    Colour
    Item
    £12.65(ex. VAT)
    £15.18 (inc. VAT)
    Quantity
    Please choose your colour
    Available for Delivery (See Delivery Options Below)

    Description

    Watco Compact Speed Bumps are manufactured from heavy duty, recycled rubber with a textured surface to prevent skidding, making them highly effective for calming traffic. Watco Compact Speed Bumps are available in 500mm wide segments to suit any road width.



    Quick Links - Click To Jump To Section:




    Features & Benefits


    • Slows traffic to 10mph
    • White reflectors in middle sections for night time visibility
    • Will withstand 40 tonne HGVs
    • 100mm fixing bolts supplied



    Safety


    When installing Speed Bumps standard personal protective equipment should be worn as a minimum. These include 3M dust masks (or similar), Safety goggles, heavy duty gloves and overalls.



    Preparation


    Ensure that the areas to have Speed Ramps fitted are clean, dry and free from loose and friable material. Any “dished” or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface. Dry fit all Speed Bumps to ensure they fit freely and that they sit flat down on the surface.



    Installation


    The following can be used as a guide when installing the Speed Bumps:

    • Position Speed Bumps on substrate surface where they are to be installed
    • Mark out clearly where the Speed Bumps are to be drilled and fitted
    • Drill through the pre-made Fixing holes on the Speed Bump into the substrate
    • Screw Speed Bumps down into substrate using the Fixings supplied



    Cleaning Guide and Tips


    Whilst Speed Bumps are extremely resilient to dirt and contaminants, it can, as with most other things, become dirty.

    Dirt and debris can easily be removed using a stiff brush and should be carried out on a regular basis.

    If Speed Bumps has been subjected to spillages or the dirt has become embedded, detergents such as Grezoff or similar can be used. It is always advisable to test any cleaning product on Speed Bumps before starting the cleaning procedure. This can be done in an inconspicuous area of the installation or, if preferred, a sample can be sent, free of charge for testing purposes.

    Using the detergent, warm water and a suitable brush, scrub the areas until clean. The excess water can be removed using a wet/dry vacuum cleaner or suitable absolvable materials.

    Where circumstances allow, Speed Bumps can be power washed without causing harm. Care should be taken when the Speed Bumps have been stuck down and/or edge sealed as very high-pressure power washing or repeated power washing could cause damage to sealants and adhesives.

    The security of the fixings/adhesive should be checked on a regular basis. Circumstances will vary, based upon the volume of foot traffic etc, but, as a guide, monthly inspections would be advisable.



    Product Details
    9363-947789

    Data sheet

    For Use By
    Professional Use
    Minimum Applied Thickness
    500mm
    Suitable For Use On
    Asphalt
    Suitable For Use On
    Concrete
    Product Usage Type
    Floor Strips
    Colour Family
    Yellow
    Colour Family
    Black

    Be the first to ask a question about this product!


    Question about the product

    * Required fields
    (read)
    Send

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Watco Compact Speed Bumps is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT