Sikafloor 2540W


This Sikafloor system, 2540W, is a two-component, low emission, water dispersed, coloured, epoxy resin-based coating for flooring applications.


  • Low VOC/AMC emissions
  • Low particle emissions
  • Good chemical and mechanical resistance
  • Water vapour permeable
  • Water dilutable
  • Odourless
  • Easy application
  • AgBB approved
Bulk Buy

£199.11 tax excl.

£238.93   tax incl.
Select a different colour

Close colour picker

Product Description

Sikafloor 2540W is a two component, low emission, AgBB approved, water dispersed, coloured, epoxy resin based coating for flooring applications. Sikafloor 2540W has a good chemical and mechanical resistance and is easily applied.

Recommended Uses 

  • Concrete flooring
  • Cement screeds
  • Epoxy mortars
  • Broadcast systems
  • Normal to medium heavy mechanical and chemical loading
  • Production areas
  • Warehouses
  • Car park decks
  • Garages

For further details and application advice, please download the data sheets below.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)3.3 - 5m² per kg
ApplicationBrush, Roller
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Matthew on 11/07/2018

Good afternoon, Can this product be used to paint textured stair nosings made of nickel bronze (metal)? Many thanks, Matthew


No, Sikafloor 2540W would not bond to this type of metal.

questions James on 21/03/2018

How can you achieve a matt finish with this product. We do not want a shiny gloss finish. Thanks


Sikafloor 2540W is only available as a matt finish as standard.

questions PETER on 29/01/2018

You say it is not suitable for domestic use, why is this please


We advise that Sikafloor 2540W and other products like it are only suitable for professional use and should only be applied by suitably experienced and trained contractors. Sikafloor 2540W is intended for use in production areas, warehouses, car park decks, garages, etc. and other products/systems would be better suited for use inside domestic dwelling areas such as kitchens, hallways, lounges, etc.

questions victoria on 29/01/2018

Is it possible to get some colour sample pots?


Sample pots are not available for this product, it is however produced in industry standard RAL and BS colours which are available to view with reasonable accuracy on official colour charts.

questions James Oubridge on 10/07/2017

Is the product suitable for use in domestic kitchens? and what would you recommend cleaning it with once installed? Thank


We would not recommend Sikafloor 2540W for a domestic kitchen environment. If you have a specific application please contact us with details so we can make a recommendation, or alternatively you could look at something like Rust-Oleum 9200 Rust-O-Thane which is a popular choice for this type of work and may be suitable for your application.

questions Adam  on 22/03/2017
Question: Do you have a clear version? Matt/gloss

Sikafloor 2540W is low sheen finish as standard and does come in clear which is now available to order via our website.

questions Keith Wright  on 01/09/2016
Question: How do I clean my tools after using sika floor -2540w
rollers brushes etc

As this product is water based we would recommend Sika Thinner C or just hot soapy water straight after use.


Question about the product

* Required fields

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable