Rust-Oleum 7200 Floorcoat PU

Rust-Oleum 7200 Floorcoat PU View larger
Typical Coverage (per coat)9m² per litre
Touch Dry4 Hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Rust-Oleum 7200 Floorcoat PU is a single pack, polyurethane enhanced floor coating for use inside and out that offers good protection and is very easy to apply. Available in Gloss and Satin finishes and is fully tintable in any RAL, BS or NCS except metallic and fluorescent shades. Rust-Oleum 7200 Floorcoat PU can be applied directly on concrete floors, wooden floors and masonry.

Read Full Description

More details

£19.39 + VAT

Rust-Oleum 7200 Floorcoat PU is a single pack easy to apply solvent based urethane modified alkyd floor coating specially designed for applying on dry concrete, wood and masonry for interior and exterior use. Rust-Oleum 7200 Floorcoat PU is also ideal as a line marking product, the coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.

Rust-Oleum 7200 Floorcoat PU can be applied directly on concrete floors, wooden floors and masonry which are completely clean and dry. It is not recommended to apply on smooth/dense concrete or concrete containing a damp repellent additive, which will prevent a good adhesion. Rust-Oleum 7200 Floorcoat PU can also be applied on old good adhering coatings and can also be applied onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.

Product Advantages:

  • Extra durable because of polyurethane addition
  • Excellent flow and aspect
  • Any colour available in gloss & satin
  • For indoor and outdoor usage
  • For many different surfaces
  • High coverage: 9m² per litre

Can Be Used For:

  • Concrete floors
  • Line marking
  • Wooden floors
  • Pre-painted floors


To ensure homogeneity, coating materials should be thoroughly stirred prior to use. Remove oil, grease and other contamination with Rust-Oleum Mathys ND14 Cleaner Degreaser or high pressure (steam) cleaning in combination with appropriate detergents. Sand old intact coatings to roughen the surface in order to establish a good adhesion. Check the compatibility with old intact coatings. During application the surface should be dry and clean. On porous concrete a first coat should be applied with Rust-Oleum 7200 Floorcoat PU diluted with ±5% Rust-Oleum Thinner 633. On new concrete (>28 days) use Rust-Oleum 7201 Universal Floor Primer as a first coat or use Rust-Oleum Mathys 108 Surfa Etch Solution to neutralise any remaining alkalinity from the cement. Remove curing compounds by means of dust free blasting.

Application & Thinning:

  • Brush: Sparingly, if required, with 5% Rust-Oleum Thinner 633.
  • Roller: Sparingly, if required, with 5% Rust-Oleum Thinner 633. In case of roller application it can be necessary to apply 2 coats in order to obtain the recommended film thickness.
  • Air-Atomised Spray: Thin with max. 10% Rust-Oleum Thinner 641. Gravity cup and pressure cup. Tip size: 1.0 -1.5 mm. Atomising pressure: 2 – 4 bar.
  • Cleanup: Immediately after application using Rust-Oleum Thinner 633.

Application Conditions:

Apply in a dry and well-ventilated area. Do not apply Rust-Oleum 7200 Floorcoat PU on alkaline substrates, or in areas which will be constantly under water.

Send us your question

Be the first to ask a question about this product!

Question about the product

I have read and agree to the Conditions of Use (read) Send

The question has been correctly sent

Free delivery on orders over £75 (terms & conditions)

• Deliveries will be made within 3 working days (standard delivery)
• You must be UK mainland based for the free delivery offer.
• Postcodes listed are excluded from the free delivery and priced below.

Please note: deliveries will need to be signed for at the point of delivery.

UK Mainland OnlyUp to £75.00£75.01 +
Standard (2/3 working days)£8.00FREE
Next Day£15.00£15.00
Next day before 09:00am£30.00£30.00
Next day before 10:30am£25.00£25.00
Next day before 12:00pm£20.00£20.00
Saturday Delivery£35.00£35.00

£25 (Standard 2-3 Day Delivery Only)

AB30, AB31, AB32, AB33, AB34, AB35, AB36, AB37, AB38, AB44, AB45, AB46, AB47, AB48, AB49, AB50, AB51, AB52, AB53, AB54, AB55, AB56, FK, G83, IV, KW1, KW2, KW3, KW4, KW5, KW6, KW7, KW8, KW9, KW10, KW11, KW12, KW13, KW14, PA, PH, HS, KA27, KA28, ZE

£35 (Standard 2-3 Day Delivery Only)


£50 (Standard 2-3 Day Delivery Only)


Please note that all carriage prices are quoted without V.A.T. at the current rate.

Scottish Islands - outside standard distribution area, please contact us for a quote.

There may be an exception for heavy goods when purchased in quantity where we will contact you to advise any additional charges.

Next Day delivery and Saturday Service is available on stocked items for orders received before 11:00am only.

Because of the nature of our products, we use specially selected carriers to ensure safe and prompt delivery to you.

Please note: Any time or date named by Rawlins Paints Limited for delivery is given and intended as an estimate only and Rawlins Paints Limited shall not be liable to make good any damage or loss whether arising directly or indirectly out of a delay in delivery. Deliveries are made using a reliable nationwide carrier. Although over 99% of consignments arrive on time, we recommend that no labour is employed to undertake work until materials have arrived on site.

7200 Floorcoat PU TDS


7200 Floorcoat PU MSDS


7200 Product Brochure

Whilst every effort is made to ensure our data sheets are up to date, we advise you check the latest revision directly with the manufacturer to ensure you have the most current version.
E J Rawlins & Co. Ltd trading as Rawlins Paints make available product data sheets and information in good faith but without warranty. We do not accept liability for any errors or omissions contained within the data sheets or any outdated versions.