Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating: For foot traffic, interior and exterior Anti-slip additive is premixed in the coating For use on old concrete (>2 yrs), metal and wood Unique uniform appearance, high gloss Touch dry: 6 hours, coverage: 8m² per litre Available in...
Rust-Oleum 7100 Floor Coating
Rust-Oleum 7100 Floor Coating is a quick drying, solvent-based, Alkyd gloss floor paint designed for use on interior and exterior concrete over 2 years old.
- Abrasion resistant
- For interior and exterior foot traffic
- Apply to metal and wood
- Great hiding power
- Decorative colour range
- Also available as an anti-slip version
Rust-Oleum 7100 Floor Coating
Rust-Oleum 7100 Floor Coating is an easy to apply solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. Rust-Oleum 7100 Gloss Floor Coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.
- Wood surfaces
- Concrete over 2 years old
- On old, good adhering coatings
- Metal floors that have been primed
- Do NOT apply on smooth/dense concrete that contains a damp-repellent additive.
- Density: 1,0 - 1,1 kg/l
- Gloss Level: Gloss
- Solids content in volume: 36 - 40 %
Drying Times At 20°C/RH 50%
- Touch dry: 6 hours
- Dry to recoat: 24 hours
- Fully cured: 1 week
8,0 m²/l at 50 µm dry
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rust-Oleum 7100 Floor Coating is available in two versions, standard and anti-slip (Rust-Oleum 7100NS Anti-Slip Floor Coating). Rust-Oleum 7100 Floor Coating can also be applied on old good adhering coatings and onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Brush, Roller
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 1 Week
- 8m² per litre
- 1,0 - 1,1 kg/l
- Solids by Volume
- 36 - 40 %
- 456 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 6 Hours
- Recommended Dry Film Thickness
- 50 µm
- Recommended Wet Film Thickness
- 130 µm
- UN Number
- Not regulated
- 8,0 m²/l at 50 µm dry
|Mark on 2018-11-24 16:31:54|| |
Can I cover concrete print As I no longer like colour
Rust-Oleum 7100 Floor Coating should be OK to be applied to this kind of surface, but if usage will include parked cars and therefore the possibility of hot tyre pick up, we would only say yes with a thorough grind of the surface beforehand.
|Fran Holland on 2018-10-14 11:47:07|| |
Can this be used outdoors to paint concrete patio slabs? Thanks
Technically yes, but we would recommend Rust-Oleum Tarmacoat as a more suited product for this type of application.
|Jackie on 2018-08-24 00:46:39|| |
Could I use this product on a concrete kitchen work surfacethat has been sealed?
No, the only product we have offer for worktops is Rust-Oleum Worktop Transformation Kit.