Blackfriar Professional Acrylic Floor Paint is a quick drying, low odour water based floor paint providing a tough and durable finish on virtually any surface. Blackfriar Professional Acrylic Floor Paint protects and transforms floors with an attractive finish for surfaces such as brickwork, concrete, cement, wood, metal and stone.
Blackfriar Professional Acrylic Floor Paint is also ideal for asphalt and tarmac, it protects floors with an easy-to-clean thermoplastic coating and stops the dusting of concrete surfaces. Blackfriar Professional Acrylic Floor Paint resists grease, oil and weak solutions of acid and alkali, making it ideal for domestic, commercial and industrial use.
Features & Benefits
- Indoor and outdoor use.
- Water Based - low odour.
- Quick drying.
- Suitable for asphalt, Tarmac®, brickwork, concrete, cement, wood, metal and stone.
- Resistant to grease, oil and weak solutions of acid and alkali.
- Can be applied to previously painted surfaces.
- Brush or roller application.
- Ideal for domestic, commercial and light industrial use.
Preparation
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying Blackfriar Professional Acrylic Floor Paint.
Application
Stir thoroughly before use. Apply with a brush or roller working the paint in any surface imperfections. On bare or new surfaces first apply Blackfriar Professional Water Based Floor Sealer followed by 1-2 coats of Blackfriar Professional Acrylic Floor Paint. On previously painted surfaces apply 1-2 coats as required.
Blackfriar Professional Acrylic Floor Paint is not suitable for use over PVC, thermoplastic tiles, quarry tiles or granolithic concrete. Do not apply it on concrete surfaces treated with alkali containing liquids, areas subjected to rising damp or areas treated with PVA bonding solutions. Do not apply in cold (below 10°C), damp or humid conditions.
If concrete floors have no profile then pre-treat with Blackfriar Professional Acid Etch to provide a mechanical key, followed after thorough rinsing by Blackfriar Professional Water Based Floor Sealer prior to applying 1-2 coats of Blackfriar Professional Acrylic Floor Paint.
Coverage Rate
10-12m² /litre per coat. Two coats recommended.
Drying Time
4-6hrs @20°C. Allow to dry for a minimum of 6hrs @20°C between coats. Full cure is achieved in 3-5 days @20°C.
Clean Up
Remove as much product from application equipment as possible before washing with water. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Jennifer Byrom on 27/02/2019
