504 Standard Anti Slip Aggregate
Manufacturer: Rawlins Paints
A specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased 'anti-slip' properties in both dry and wet conditions to improve safety. Broadcast/sprinkle into the freshly applied wet coating and over coat once dry to encapsulate the additive fully.
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased 'anti-slip' properties in both dry and wet conditions to improve safety. Broadcast/sprinkle into the freshly applied wet coating and over coat once dry to encapsulate the additive fully. A coat over the additive will also make cleaning of the finished floor surface significantly easier.
Features & Benefits
- Ideal for internal and foot traffic areas
- Hard wearing and chemical resistance
- Coloured Quartz Aggregate 0.4-0.7mm
- Produces a rough, non-skid surface
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
|Typical Coverage (per coat)||4m² per KG|
|The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.|
Be the first to ask a question about this product!
Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes. For more information, please see our Terms & Conditions of Sale.Close