Remmers Floormix DQ Aggregate is a special blend of graded decorative colour quartz aggregate for the production of epoxy mortar screeds. Can be laid at 3 - 4mm and available in a wide range of colour blends. Blend with any of the Remmers epoxy resins as a binder.
Rust-Oleum Non-Skid Additive NS 500
Rust-Oleum Non-Skid Additive NS 500 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.
Rust-Oleum Non-Skid Additive NS 500 is based on aluminium oxide granules, the black version is a mixture of aluminum oxide with carborundum and iron oxide. Rust-Oleum Non-Skid Additive NS 500 is intended to be added to floor coatings to produce a non-skid surface and can be used in combination with the following Rust-Oleum Floor coatings:
- Rust-Oleum B95SL Flexible Self Levelling Epoxy
- Rust-Oleum 5500 Solvent Free Epoxy
- Rust-Oleum 9100 Epoxy
- Rust-Oleum 9600 Rust-O-Thane Polyurethane
- Rust-Oleum Mathys Pegakote
- Rust-Oleum 9700 Coldmax Rapid
- Rust-Oleum 5800 Epoxy Rapid WB
Rust-Oleum Non-Skid Additive NS 500 can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment. Rust-Oleum Non-Skid Additive NS 500 is intended for Non-Skid industrial flooring and should be topcoated with the required Rust-Oleum system if sprinkled.
- Sparingly: 5 m²/kg
- Dense: 2 m²/kg
Directions for Use
Sprinkling: Sprinkle the granulates onto the freshly applied, wet Rust-Oleum coating, manually with a "sprinkler-box" for small areas, or with special low-pressure spraying equipment with a nozzle opening of at least 18 mm (¼ inch); air pressure between 1 - 3 bars.
Mixing: Mix the granulates into the wet coating material and apply the coating with a roller or a brush (not by spraying), stir regularly to avoid settling of the granulates.
Note: For a less coarse anti-slip layer Anti-Slip additive NS 200 is recommended.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131) 0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).
Remmers Floormix Aggregate is a special grade of colour quartz aggregate for the production of epoxy mortar screeds. One primary colour with black and white flecks to achieve an attractive easy to apply decorative resin mortar. Blend with any of Remmers clear epoxy resins as a binder. Ideal for workshops, food production areas, wet areas, police cells,...
Rust-Oleum Epoxyshield Decorative Flakes (Chips) are intended for use with their Epoxyshield Garage Floor Coating or Epoxyshield Maxx however it can also be used with other Rust-Oleum Mathys Floor Coating Systems.
Remmers Ceramix 20/30 is a coloured quartz sand with a grain size of approx. 2 - 3mm producing a decorative mixture of aggregates for coloured quartz floorings, e.g. decorative pebble covers or stone imitation covers. Image already added
Sikafloor Earthing Kit is a system of anchored brass plates with a stable earth connection. Each box contains 10 connections and at least 2 per room should be used - see coating system data sheet for more details.
Smartkote Protectakote UVR Accelerator is a liquid second component which may be added to ProtectaKote UVR if desired to increase the rate at which the product cures at low temperatures or humidity. Protefctakote UVR Accelerator is not intended for use at normal room temperatures.
Remmers PUR Top Accelerator is a VOC free liquid additive used to accelerate the curing time of Remmers PUR Top polyurethane systems. Remmers PUR Top Accelerator can be easily added and mixed into the Remmers PUR Top polyurethane systems. The addition of the accelerator will increase the speed of cure and will not affect the final characteristics of the...
Remmers Accelerator D40 is a single component liquid catalyst used to reduce the cure period of the PUR Indu Color D40. This enables faster installation of the car park and balcony decking membrane system as well as localised remedial works to be carried out in short period of time.
Rust-Oleum Non-Skid Additive NS 200 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.
Remmers Ceramix 12 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Spread the material full cover into the fresh base coat. After hardening, remove unbound excess of Remmers Ceramix 03. Image already added
Sikafloor DecoFiller is available in different colours and is certified as a low emission, synthetic fine filler, optimised for highly decorative flooring systems in combination with Sikafloor 169.
Sikafloor Pronto Filler is fine white aggreagate filler of specific grading that should be used as an additive with certain Sikafloor Pronto products to create self-smoothing screeds and levelling mortars.
Sikalastic Fleece 120 is a non-woven, needle-punched polyester fleece reinforcement to enhance the strength and durability of various Sika systems. Sikalastic Fleece 120 is ideal for crack bridging, waterproofing and strengthening applications displaying complex details and geometry or when accessibility is limited.
Remmers Quartz 01/03 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.1 - 0.3mm. Image already added