Sika PU Accelerator
  • Sika PU Accelerator

Sika PU Accelerator

192470

Sika PU Accelerator is a catalyst designed to increase the cure rate of Sikalastic products and Sikafloor products to facilitate a faster application and reduce downtime in areas where a rapid return to service is required.

Size
£3.56
VAT excluded

£4.27 Tax incl.
Quantity

Description

Sika PU Accelerator is a catalyst designed to increase the cure rate of Sikalastic products and Sikafloor products to facilitate a faster application and reduce downtime in areas where a rapid return to service is required.

Features and Benefits:

  • Reduces downtime in areas where a fast return to service is required
  • Avoids delays due to lower temperatures

For more details please download the product data sheet from the 'DATASHEETS' tab above.

Product Details
192470

Data sheet

Typical Coverage (per coat)
60 grams is to accelerate 5lts

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

Sikafloor Comfort Regupol 4580

Sikafloor Comfort Regupol 4580 is a polyurethane rebound foam shockpad which is part of the Sika ComfortFloor Decorative Pro system. Sikafloor Comfort Regupol 4580 is a prefabricated shockpad produced by bonding polyether-foam crump and fine rubber-dust with a polyurethane compound.

Price £663.63
In stock

Jotun Anti-Skid Aggregate

Jotun Anti-Skid Aggregate is aluminium oxide grains, designed to be spread into the last coat in a non-skid system. Available in extra coarse, coarse, medium and fine particle sizes. Suitable as anti-skid material in a wide range of coating systems in atmospheric environments. Suitable on any type of surface, depending on the specific coating system.

Price £14.95
In stock

Sikafloor 1 MetalTop

Sikafloor 1 MetalTop is a one part, preblended, coloured metallic dry shake hardener for concrete comprising of cement, hard metallic non corroding aggregates, special admixtures and pigments.

Price £67.42
In stock

Sika Quartz Sand

Sika Quartz Sand is a light coloured kiln dried graded quartz sand for use with Sika coatings and membranes to provide a mechanical key for subsequent levelling materials. Sika Quartz Sand can also be used to bulk out certain Sika screeds and mortars as well as being used as an anti-slip additive.

Price £21.11
In stock

Sika PVA Colorflakes

Sika PVA Colorflakes are broadcast on to various Sikafloor systems (e.g. Sika ComfortFloor and Sika ComfortFloor Pro) to provide an attractive decorative appearance before being sealed by a compatible clear sealer.

Price £353.86
In stock

Remmers Ceramix 03

Remmers Ceramix 03 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Image already added

Price £55.08
In stock

International Non Slip Aggregate

International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131)  0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).

Price £5.81
In stock

Rust-Oleum Non-Skid Additive NS 300

Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.

Price £9.48
In stock

508 Fine Particle Anti-Slip Additive

508 Fine Particle Anti-Slip Additive is a fine particle texturing additive specially formulated to be added to various products in our floor coatings range to provide a finely textured finish that increases 'anti-slip' properties but allows the surface to still be easily cleaned.

Price £17.01
In stock

Sikafloor Pronto Filler

Sikafloor Pronto Filler is fine white aggreagate filler of specific grading that should be used as an additive with certain Sikafloor Pronto products to create self-smoothing screeds and levelling mortars.

Price £49.73
In stock

Remmers Quartz 01/03

Remmers Quartz 01/03 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.1 - 0.3mm. Image already added

Price £17.91
In stock

Ennis-Flint Reflective Glass Beads

Reflective Glass Beads to increase reflectivity, durability and slip resistance of surface applied coatings. For ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981.

Price £25.45
In stock

Coo-Var Profloor Plus Anti-Slip Aggregate

Coo-Var Profloor Plus Anti-Slip Aggregate is ground mineral powder of specific particle size (0.54 – 0.71mm) to be used to create an anti-slip element to Coo-Var Profloor Plus, Profloor Plus FH and Coo-Var Profloor Plus Cold Cure 2 Pack Epoxy Floor Paints.

Price £6.97
In stock

Rust-Oleum Non-Skid Additive NS 500

Rust-Oleum Non-Skid Additive NS 500 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.

Price £10.69
In stock

Rust-Oleum Non-Skid Additive NS 100

Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is not harmful when falling on the floor and easier to clean than coarse anti-slip floors. Mix with the required Rust-Oleum paint prior...

Price £5.75
In stock