Coo-Var Profloor Anti-Slip Aggregate Option is ground mineral powder of specific particle size (0.25 – 0.39mm) to be used to create an anti-slip element to Coo-Var Profloor 2 Pack Epoxy Floor Paint.
Sika Anti Slip Agent
Sika Anti Slip Agent is an anti-slip agent for the Sika Balcony System & the Sika ComfortFloor seal coat.
Sika Anti Slip Agent is an anti-slip agent for the Sika Balcony System & the Sika ComfortFloor seal coats.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Remmers Quartz 20/30 is a light coloured naturally rounded quartz which is washed, dried and graded. Applications include resin systems, concrete, floor screeds, artificial stone and as a general filler. Image already added
Sika Reemat Premium is a glass fibre reinforcement mat for use in conjunction with various Sika systems to provide increased system strength, crack bridging and longevity. Refer to the relevant Sika system/product data sheets for specfic details on application, consumption, etc.
Sika Quartz Sand is a light coloured kiln dried graded quartz sand for use with Sika coatings and membranes to provide a mechanical key for subsequent levelling materials. Sika Quartz Sand can also be used to bulk out certain Sika screeds and mortars as well as being used as an anti-slip additive.
Remmers Artico Color is a highly filled pigment paste for pigmenting synthetic resins, e.g. Remmers PUR Top Plus. Used for producing coloured, slip-retarding floor coating sealants in interior areas.
Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.
Sikafloor Pronto Pigment is a coloured powder used to colour certain Sikafloor Pronto products. Sikafloor Pronto Pigment is pre-mixed with a disovler and then added in measured quantities to the selected products resin base. See the Sikafloor Pronto product data sheet for specific details on how to use.
Sika PU Accelerator is a catalyst designed to increase the cure rate of Sikalastic products and Sikafloor products to facilitate a faster application and reduce downtime in areas where a rapid return to service is required.
Smartkote Protectakote Safety Grip is an additive for Protectakote non-slip coatings which provides improved grip under wet conditions. Protectakote Safety Grip comprises accurately sized sand particles with no dust, fines or aggregations. Can be added to Protectakote at a 20% (m/m) level where wet conditions will be experienced, or where additional...
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is not harmful when falling on the floor and easier to clean than coarse anti-slip floors. Mix with the required Rust-Oleum paint prior...
Remmers Floormix DQ Aggregate is a special blend of graded decorative colour quartz aggregate for the production of epoxy mortar screeds. Can be laid at 3 - 4mm and available in a wide range of colour blends. Blend with any of the Remmers epoxy resins as a binder.
508 Fine Particle Anti-Slip Additive is a fine particle texturing additive specially formulated to be added to various products in our floor coatings range to provide a finely textured finish that increases 'anti-slip' properties but allows the surface to still be easily cleaned.
Remmers Quartz 07/12 is a special combination of washed, fire-dried, quartz sand mixture used as a filler for scratch coats and for blinding fresh coatings to produce slip resistant covers. Grain size approx. 0.7 - 1.2mm. Image already added
Sikafloor Pronto Filler is fine white aggreagate filler of specific grading that should be used as an additive with certain Sikafloor Pronto products to create self-smoothing screeds and levelling mortars.
A polypropylene bead additive providing additional under foot traction to floor coatings. The soft feel of this additive is ideal for comfortable bare skin contact in wet environments. Advantages Helps to prevent accidents on wet floor areas Stir directly into paint Cream in colour ISO 9001:2008 & ISO 14001:2004 Conforms with parts KU1 C/D and KF...