A specially formulated quartz aggregate to be added to various high build products in our floor coatings range to provide increased 'anti-slip' properties in both dry and wet conditions to improve safety.
Sikafloor Earthing Kit
Sikafloor Earthing Kit is a system of anchored brass plates with a stable earth connection. Each box contains 10 connections and at least 2 per room should be used - see coating system data sheet for more details.
An electrostatic charge, which occurs during materials contact and separation, has to be discharged via an earthing point. Sika provides the Sikafloor Earthing Kit, a unique tool box containing all of the necessary components for up to 10 earthing points. Every earthing point is able to conduct to earth approximately 300m². Ensure the longest distance between each earthing point in each room or area is a maximum of 10m apart.
In larger areas with longer distances, additional earthing points must be installed in accordance with the Electrical Engineer’s requirements. If site conditions or other constraints do not allow the positioning of any additional earthing points that are required, then any longer distances (>10m) must be bridged by the use of additional adhesive copper tapes in accordance with the relevant specifications. All of the earthing points have to be connected to an appropriate ring-main to ground them and this work must be carried out and approved by the responsible Electrical Engineer in accordance with all relevant local regulations.
Sikafloor Earthing Kit conductor system (system of anchored brass-plates with stable earth connection), instructions for use have to be followed exactly (refer to the coating system data sheet you intend to use).
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
508 Fine Particle Anti-Slip Additive is a fine particle texturing additive specially formulated to be added to various products in our floor coatings range to provide a finely textured finish that increases 'anti-slip' properties but allows the surface to still be easily cleaned.
Sika PU Coloured Quartz are a blend of graded, coloured quartz aggregate used with various Sika coating systems to provide colour, slip resistance and build. Refer to the respective product data sheets for full details on consumption, use and performance.
Remmers Quartz 04/08 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.4 - 0.8mm.
Reflective Glass Beads to increase reflectivity, durability and slip resistance of surface applied coatings. For ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981.
Rust-Oleum Non-Skid Additive NS 200 is a specially selected non-skid additive that can be mixed with the required Rust-Oleum coating system or sprinkled into the freshly applied coating to produce a non-skid surface.
Sikafloor 2 SynTop, Non-metallic dry shake floor hardener. Sikafloor 2 SynTop is a one part, preblended, coloured synthetic dry shake hardener for concrete comprising of cement, hard aggregates, compatible admixtures and pigment.
Remmers Selectmix SBL is a filler mixture with a special aggregate grading curve for epoxy resins that are used for the production of highly filled flow covers or levelling layers. Image already added
Sika PU Accelerator is a catalyst designed to increase the cure rate of Sikalastic products and Sikafloor products to facilitate a faster application and reduce downtime in areas where a rapid return to service is required.
Sikafloor Comfort Regupol 4580 is a polyurethane rebound foam shockpad which is part of the Sika ComfortFloor Decorative Pro system. Sikafloor Comfort Regupol 4580 is a prefabricated shockpad produced by bonding polyether-foam crump and fine rubber-dust with a polyurethane compound.
Remmers Ceramix 03 is a special, wear resistant, coloured blinding material to be used as blinding material for anti-slip covers and for the production of mortars and screed mixtures. Image already added
Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is not harmful when falling on the floor and easier to clean than coarse anti-slip floors. Mix with the required Rust-Oleum paint prior...
Sikafloor Comfort Regupol 6015H is a rubber shockpad that is part of the Sika ComfortFloor Pro system. Sikafloor Comfort Regupol 6015H is a prefabricated rubber shockpad produced by bonding rubber crump with a polyurethane compound.
International Non Slip Aggregate is for use with various International products and helps produce an aggregated non-slip surface where applied. Available in 3 grades: 0.3-0.5mm Quartz (GMA131) 0.5-1.8mm Bauxite (GPA900) 1-3mm Flintag (GMA132).
Remmers Ceramix 20/30 is a coloured quartz sand with a grain size of approx. 2 - 3mm producing a decorative mixture of aggregates for coloured quartz floorings, e.g. decorative pebble covers or stone imitation covers. Image already added