To be added to any of the Epoxyshield Floor Coatings range - Epoxyshield Ultra, Epoxyshield Sealer, Epoxyshield Maxx and Epoxyshield Garage Floor Coating to produce a non-skid surface.
Sika Extender T
Sika Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for certain Sika coating systems. It can be used in combination with Sika Epoxy, Polyurethane and MMA systems.
Sika Extender T is an inert, fine, white, fibrous polymer powder used as a thickening agent for certain Sika coating systems.
- In combination with: Sika Epoxy, Polyurethane and MMA systems
- For applications on horizontal surfaces to create custom orange peel textures
- For applications on vertical surfaces to hold the resin in place during cure
- To create a thin set, fine texture, crack and pore filler to repair horizontal and vertical surfaces
Advantages & Benefits:
- Allows for viscosity adjustment during Sika resin applications to suit site conditions
- Economical, easy to mix and use
- No effect on pot life or cure rate
- Low addition rate to change viscosity when compared to other epoxy thickening agents
- Non carcinogenic
- Inert, non-reactive filler
For more details please download the product data sheet from the 'DATASHEETS' tab above.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Be the first to ask a question about this product!
Remmers Quartz 20/30 is a light coloured naturally rounded quartz which is washed, dried and graded. Applications include resin systems, concrete, floor screeds, artificial stone and as a general filler. Image already added
Rust-Oleum Non-Skid Additive NS 300 is based on thermally split flint stones and is intended to be added to floor coatings to produce a non-skid surface. Can be mixed with the required Rust-Oleum coating system or can be sprinkled into the freshly applied coating manually or with special low pressure spraying equipment.
Remmers Quartz 04/08 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.4 - 0.8mm.
Remmers PUR Top Accelerator is a VOC free liquid additive used to accelerate the curing time of Remmers PUR Top polyurethane systems. Remmers PUR Top Accelerator can be easily added and mixed into the Remmers PUR Top polyurethane systems. The addition of the accelerator will increase the speed of cure and will not affect the final characteristics of the...
Remmers Quartz 01/03 is a special combination of washed, fire-dried, quartz sand mixture used as a filler in synthetic resin bound Remmers floor coatings. Grain size approx. 0.1 - 0.3mm. Image already added
Rust-Oleum Epoxyshield Decorative Flakes (Chips) are intended for use with their Epoxyshield Garage Floor Coating or Epoxyshield Maxx however it can also be used with other Rust-Oleum Mathys Floor Coating Systems.
Smartkote Protectakote Accelerator is a pure, solvent free catalyst used to speed up the drying time of Protectakote non-slip and smooth coatings. Pre-weighed – just add and stir in, long pot life, drying times can be reduced to as little as one hour, humidity and low temperature effects which extend drying times can be reduced.
Remmers Floormix DQ Aggregate is a special blend of graded decorative colour quartz aggregate for the production of epoxy mortar screeds. Can be laid at 3 - 4mm and available in a wide range of colour blends. Blend with any of the Remmers epoxy resins as a binder.
Reflective Glass Beads to increase reflectivity, durability and slip resistance of surface applied coatings. For ‘drop-on’ or ‘surface-applied’ application which conforms fully to the requirements of Class B of BS 6088 1981.
508 Fine Particle Anti-Slip Additive is a fine particle texturing additive specially formulated to be added to various products in our floor coatings range to provide a finely textured finish that increases 'anti-slip' properties but allows the surface to still be easily cleaned.
Coo-Var Profloor Plus Anti-Slip Aggregate is ground mineral powder of specific particle size (0.54 – 0.71mm) to be used to create an anti-slip element to Coo-Var Profloor Plus, Profloor Plus FH and Coo-Var Profloor Plus Cold Cure 2 Pack Epoxy Floor Paints.
Remmers Add 250 is a wear resistant, transparent, chemical resistant polymer granulate. By adding the polymer spheres to liquid sealing materials, transparent as well as coloured, slip resistant sealants can be produced. Image already added
Rust-Oleum Non-Skid Additive NS 100 an anti-slip HDPE granulate that turns a standard floor coating into a durable anti-slip coating. It is intended to be added to 1K floor paint to produce a subtle non-skid surface, that is not harmful when falling on the floor and easier to clean than coarse anti-slip floors. Mix with the required Rust-Oleum paint prior...
Sikafloor Pronto AP 2 is an adhesion promoter for use with Sikafloor 10 Pronto. Sikafloor 10 Pronto is a 4-part, low-viscosity, fast curing primer based on reactiveacrylic resins with enhanced substrate adhesion for the Sikafloor Pronto Modular System.
Sikafloor Comfort Regupol 4580 is a polyurethane rebound foam shockpad which is part of the Sika ComfortFloor Decorative Pro system. Sikafloor Comfort Regupol 4580 is a prefabricated shockpad produced by bonding polyether-foam crump and fine rubber-dust with a polyurethane compound.