Remmers Add 250 is a wear resistant, transparent, chemical resistant polymer granulate. By adding the polymer spheres to liquid sealing materials, transparent as well as coloured, slip resistant sealants can be produced.
Image already added
Colour-neutral
Easy to mix in
Polymer granules for producing slip-resistant sealants
Remmers Add 250 is a wear resistant, transparent, chemical resistant polymer granulate. By adding the polymer spheres to liquid sealing materials, transparent as well as coloured, slip resistant sealants can be produced.
Mixing Instructions
Add the granules to the mixed sealant.Mix thoroughly with a slow-speed electric mixer (approx. 300 - 400 rpm). Insufficient mixing is indicated by streaks forming.
Directions
For professional users only. Apply the mixed material according to the instructions given for the sealant.
Notes
The granules are only suitable for individual layers < 200 µm thick. Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
Safety Data
For professional users only. Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Remmers Epoxy BS 2000 is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System.
Low odour
Resistant to alternating frost/thaw cycles
Ideal for warehouses, garages and car parks
Excellent adhesion on many substrates
Contains no plasticisers,...
Remmers Epoxy BS 3000 M is a high quality, matt, water emulsifiable, pigmented, epoxy resin binder with a wide application spectrum used as a sealant in the Remmers Water Vapour Diffusion-Open System.
Low odour
Can be subjected to mechanical and chemical loads as well as vehicle traffic
Interior use
Ideal for warehouses, production...
Remmers Epoxy BS 3000 SG is a high quality, silk gloss, water emulsifiable, pigmented, epoxy resin binder used as a sealant that can be subjected to various loads indoors as well as outdoors.
Anti-slipping version possible through use of Remmers Add 250
Water vapour diffusion capable
Contains no plasticisers, nonylphenols or alkylphenols...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage